Prof.Dr. FAİK NÜZHET OKTAR

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

In vivo assessment of bone enhancement in the case of 3d-printed implants functionalized with lithium-doped biological-derived hydroxyapatite coatings: A preliminary study on rabbits

Duta L., Neamtu J., Melinte R. P. , Zureigat O. A. , Popescu-Pelin G., Chioibasu D., et al.

Coatings, cilt.10, ss.1-21, 2020 (SCI Expanded İndekslerine Giren Dergi)

Production and characterization of bacterial cellulose scaffold and its modification with hyaluronic acid and gelatin for glioblastoma cell culture

Ünal S. , Arslan S., Yilmaz B. , Oktar F. N. , Sengil A. Z. , Gündüz O.

CELLULOSE, 2020 (SCI İndekslerine Giren Dergi)

Development of Satureja cuneifolia-loaded sodium alginate/polyethylene glycol scaffolds produced by 3D-printing technology as a diabetic wound dressing material

Ilhan E., Cesur S., Guler E., Topal F., Albayrak D., Guncu M. M. , et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES, cilt.161, ss.1040-1054, 2020 (SCI İndekslerine Giren Dergi)

3D Printed Polycaprolactone/Gelatin/Bacterial Cellulose/Hydroxyapatite Composite Scaffold for Bone Tissue Engineering

Cakmak A., Unal S. , Sahin A. , Oktar F. N. , Sengor M. , Ekren N., et al.

POLYMERS, cilt.12, 2020 (SCI İndekslerine Giren Dergi)

Improvement of antibacterial and biocompatibility properties of electrospray biopolymer films by ZnO and MCM-41

Mutlu E. C. , YILDIRIM A., Yildirm M., Ficai A., Ficai D., OKTAR F. N. , et al.

POLYMER BULLETIN, cilt.77, ss.3657-3675, 2020 (SCI İndekslerine Giren Dergi)

Polycaprolactone/Gelatin/Hyaluronic Acid Electrospun Scaffolds to Mimic Glioblastoma Extracellular Matrix

Ünal S. , Arslan S., Yilmaz B. , Oktar F. N. , Ficai D., Ficai A., et al.

MATERIALS, cilt.13, 2020 (SCI İndekslerine Giren Dergi)

3D printed artificial cornea for corneal stromal transplantation

Ulag S., Ilhan E., Şahin A. , Karademir Yilmaz B. , Kalaskar D. M. , Ekren N. , et al.

EUROPEAN POLYMER JOURNAL, cilt.133, 2020 (SCI İndekslerine Giren Dergi)

Glioblastoma cell adhesion properties through bacterial cellulose nanocrystals in polycaprolactone/gelatin electrospun nanofibers

Ünal S. , Arslan S., Karademir Yilmaz B. , Kazan D. , Oktar F. N. , Gündüz O.

CARBOHYDRATE POLYMERS, cilt.233, 2020 (SCI İndekslerine Giren Dergi)

Antimicrobial and Cytocompatible Bovine Hydroxyapatite-Alumina-Zeolite Composite Coatings Synthesized by Pulsed Laser Deposition from Low-Cost Sustainable Natural Resources

Popescu-Pelin G., Ristoscu C., Duta L., Stan G. E. , Pasuk I., Tite T., et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING, cilt.8, ss.4026-4036, 2020 (SCI İndekslerine Giren Dergi)

Indocyanine green based fluorescent polymeric nanoprobes for in vitro imaging

Ege Z. R. , Akan A., Oktar F. N. , Lin C. C. , Kuruca D. S. , Karademir B. , et al.

Journal of Biomedical Materials Research - Part B Applied Biomaterials, cilt.108, ss.538-554, 2020 (SCI İndekslerine Giren Dergi)

Synthesis and characterization of antibacterial drug loaded β-tricalcium phosphate powders for bone engineering applications

Topsakal A., Ekren N., Kilic O., Oktar F. N. , Mahirogullari M., Ozkan O., et al.

Journal of Materials Science: Materials in Medicine, cilt.31, 2020 (SCI Expanded İndekslerine Giren Dergi)

Investigation of 3D-Printed Polycaprolactone-/Polyvinylpyrrolidone-Based Constructs

Izgordu M. S. , Uzgur E. I. , Ulag S., Şahin A. , Yilmaz B. , Kilic B., et al.

CARTILAGE, 2020 (SCI İndekslerine Giren Dergi)

Comparative Analysis of NF-κB in the MyD88-Mediated Pathway After Implantation of Titanium Alloy and Stainless Steel and the Role of Regulatory T Cells

Akyol S., Akgun M. Y. , Yetmez M., Hanci M., OKTAR F. N. , Ben-Nissan B.

World Neurosurgery, 2020 (SCI Expanded İndekslerine Giren Dergi)

3D Printing of Gelatine/Alginate/beta-Tricalcium Phosphate Composite Constructs for Bone Tissue Engineering

Kalkandelen C., Ulag S., Ozbek B., Eroglu G. O. , Ozerkan D., Kuruca S. E. , et al.

CHEMISTRYSELECT, cilt.4, ss.12032-12036, 2019 (SCI İndekslerine Giren Dergi)

3D bio-printing of levan/polycaprolactone/gelatin blends for bone tissue engineering: Characterization of the cellular behavior

Duymaz B. T. , Erdiler F. B. , Alan T., Aydogdu M. O. , İnan A. T. , Ekren N. , et al.

European Polymer Journal, cilt.119, ss.426-437, 2019 (SCI İndekslerine Giren Dergi)

Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen scaffolds for hard tissue engineering

aydoğdu M. O. , MUTLU B., Kurt M., İNAN A. T. , KURUCA D. S. , Erdemir G., et al.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, cilt.55, ss.849-855, 2019 (SCI İndekslerine Giren Dergi)

Encapsulated melatonin in polycaprolactone (PCL) microparticles as a promising graft material

Gurler E. B. , Ergul N. M. , Ozbek B., Ekren N. , Oktar F. N. , Haskoylu M. E. , et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, cilt.100, ss.798-808, 2019 (SCI İndekslerine Giren Dergi)

Design and characterization of polycaprolactone-gelatin-graphene oxide scaffolds for drug influence on glioblastoma cells

Ünal S. , Arslan S., Gokce T., Atasoy B. M. , Karademir B. , Oktar F. N. , et al.

European Polymer Journal, cilt.115, ss.157-165, 2019 (SCI İndekslerine Giren Dergi)

Preparation and characterization of electrospun polylactic acid/sodium alginate/orange oyster shell composite nanofiber for biomedical application

Cesur S., OKTAR F. N. , EKREN N. , KILIÇ O. , Bilgiç Alkaya D., AYAZ SEYHAN S., et al.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, 2019 (SCI İndekslerine Giren Dergi)

Production of the biomimetic small diameter blood vessels for cardiovascular tissue engineering

Aydogdu M. O. , Chou J., Altun E., EKREN N. , Cakmak S., Eroglu M., et al.

INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS, cilt.68, ss.243-255, 2019 (SCI İndekslerine Giren Dergi)

3D Printing Artificial Blood Vessel Constructs Using PCL/Chitosan/Hydrogel Biocomposites

Ulag S., Kalkandelen C., OKTAR F. N. , UZUN M. , ŞAHİN Y. M. , KARADEMİR B. , et al.

CHEMISTRYSELECT, cilt.4, ss.2387-2391, 2019 (SCI İndekslerine Giren Dergi)

Nanofibrous wound dressing material by electrospinning method

Yeniay E., Ocal L., Altun E., Giray B., OKTAR F. N. , İNAN A. T. , et al.

INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS, cilt.68, ss.11-18, 2019 (SCI İndekslerine Giren Dergi)

Novel electrospun polycaprolactone/graphene oxide/Fe3O4 nanocomposites for biomedical applications

Aydogdu M. O. , EKREN N. , Suleymanoglu M., Erdem-Kuruca S., Lin C., Bulbul E., et al.

COLLOIDS AND SURFACES B-BIOINTERFACES, cilt.172, ss.718-727, 2018 (SCI İndekslerine Giren Dergi)

Encapsulation of indocyanine green in poly(lactic acid) nanofibers for using as a nanoprobe in biomedical diagnostics

Ege Z. R. , AKAN A., OKTAR F. N. , Lin C., KARADEMİR B. , GÜNDÜZ O.

MATERIALS LETTERS, cilt.228, ss.148-151, 2018 (SCI İndekslerine Giren Dergi)

Chitosan/poly(ethylene glycol)/hyaluronic acid biocompatible patches obtained by electrospraying

MUTLU E., Ficai A., Ficai D., YILDIRIM A., YILDIRIM M., OKTAR F. N. , et al.

BIOMEDICAL MATERIALS, cilt.13, 2018 (SCI İndekslerine Giren Dergi)

Synthesis, characterization, and biological properties of composites of hydroxyapatite and hexagonal boron nitride

ÜNAL S. , EKREN N. , Sengil A. Z. , OKTAR F. N. , Irmak S., Oral O., et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, cilt.106, ss.2384-2392, 2018 (SCI İndekslerine Giren Dergi)

Development of Amoxicillin-Loaded Electrospun Polyurethane/Chitosan/ beta-Tricalcium Phosphate Scaffold for Bone Tissue Regeneration

Topsakal A., UZUN M. , Ugar G., Ozcan A., Altun E., OKTAR F. N. , et al.

IEEE TRANSACTIONS ON NANOBIOSCIENCE, cilt.17, ss.321-328, 2018 (SCI İndekslerine Giren Dergi)

Development of Amoxicillin-Loaded Electrospun Polyurethane/Chitosan/β-Tricalcium Phosphate Scaffold for Bone Tissue Regeneration

Topsakal A., Uzun M. , Ugar G., Özcan A., Altun E., Oktar F. N. , et al.

IEEE Transactions On Nanobioscience, cilt.3, no.1, ss.321-328, 2018 (SCI Expanded İndekslerine Giren Dergi)

Effects of Polymethylsilsesquioxane concentration on morphology shape of electrosprayed particles

ÜNAL S. , OKTAR F. N. , GÜNDÜZ O.

MATERIALS LETTERS, cilt.221, ss.107-110, 2018 (SCI İndekslerine Giren Dergi)

Production of the novel fibrous structure of poly(epsilon-caprolactone)/tri-calcium phosphate/hexagonal boron nitride composites for bone tissue engineering

Ozbek B., Erdogan B., EKREN N. , OKTAR F. N. , Akyol S., Ben-Nissan B., et al.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, cilt.54, ss.251-260, 2018 (SCI İndekslerine Giren Dergi)

The natural nano-bioceramic powder production from organ pipe red coral (Tubipora musica) by a simple chemical conversion method

Karacan I., GÜNDÜZ O. , Ozyegin L. S. , Gokce H., Ben-Nissan B., Akyol S., et al.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, cilt.54, ss.317-329, 2018 (SCI İndekslerine Giren Dergi)

Physical-chemical characterization and biological assessment of simple and lithium-doped biological-derived hydroxyapatite thin films for a new generation of metallic implants

Popescu A. C. , Florian P., Stan G., Popescu-Pelin G., Zgura I., Enculescu M., et al.

APPLIED SURFACE SCIENCE, cilt.439, ss.724-735, 2018 (SCI İndekslerine Giren Dergi)

Production and characterization of electrospun fish sarcoplasmic protein based nanofibers

ŞAHİN Y. M. , Su S., Ozbek B., YÜCEL S., PİNAR O. , KAZAN D. , et al.

JOURNAL OF FOOD ENGINEERING, cilt.222, ss.54-62, 2018 (SCI İndekslerine Giren Dergi)

Production and characterization of electrospun ﬁsh sarcoplasmicprotein based nanoﬁbers

Şahin Y. M. , Su S., Özbek B., Yücel S., Pınar O. , Kazan D. , et al.

Journal Of Food Engineering, cilt.222, no.1, ss.54-62, 2017 (SCI Expanded İndekslerine Giren Dergi)

Comparative physical, chemical and biological assessment of simple and titanium-doped ovine dentine-derived hydroxyapatite coatings fabricated by pulsed laser deposition

Duta L., Mihailescu N., Popescu A. C. , Luculescu C. R. , Mihailescu I. N. , Cetin G., et al.

APPLIED SURFACE SCIENCE, cilt.413, ss.129-139, 2017 (SCI İndekslerine Giren Dergi)

Sintering effects of mullite-doping on mechanical properties of bovine hydroxyapatite

Yetmez M., Erkmen Z. E. , Kalkandelen C., Ficai A., Oktar F. N.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, cilt.77, ss.470-475, 2017 (SCI İndekslerine Giren Dergi)

Part 2: biocompatibility evaluation of hydroxyapatite-based clinoptilolite and Al2O3 composites

Kalkandelen C., Suleymanoglu M., Kuruca S. E. , Akan A., Oktar F. N. , Gunduz O.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, cilt.53, ss.217-223, 2017 (SCI İndekslerine Giren Dergi)

Part 1: clinoptilolite-alumina-hydroxyapatite composites for biomedical engineering

Kalkandelen C., Gunduz O. , Akan A., Oktar F. N.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, cilt.53, ss.91-99, 2017 (SCI İndekslerine Giren Dergi)

Starch/PCL composite nanofibers by co-axial electrospinning technique for biomedical applications

Komur B., Bayrak F., Ekren N. , Eroglu M. S. , Oktar F. N. , Sinirlioglu Z. A. , et al.

BIOMEDICAL ENGINEERING ONLINE, cilt.16, 2017 (SCI İndekslerine Giren Dergi)

Physical Characterization of Turbot Psetta maxima Originated Natural Hydroxyapatite

İnan A. T. , Kömür B. H. , Ekren N., Aydogdu M. O. , Gokce H., Ficai A., et al.

Acta Physica Polonica A, cilt.1, no.1, ss.397-400, 2017 (SCI Expanded İndekslerine Giren Dergi)

Physical characterization of turbot (Psetta maxima) originated natural hydroxyapatite

Inan A. T. , Komur B., Ekren N., Aydogdu M. O. , Gokce H., Ficai A., et al.

Acta Physica Polonica A, cilt.131, ss.397-399, 2017 (SCI Expanded İndekslerine Giren Dergi)

Characterization of Cu/Ag/Eu/hydroxyapatite composites produced by wet chemical precipitation

Komur B., Ozturk E. R. , Ekren N., Inan A. T. , Gunduz O. , Andronescu E., et al.

Acta Physica Polonica A, cilt.131, ss.392-396, 2017 (SCI Expanded İndekslerine Giren Dergi)

HYDROXYAPATITE SYNTHESIS FROM FISH BONES ATLANTIC SALMON SALMON SALAR

Kömür B. H. , Altun E., Aydogdu M. O. , Bilğiç Alkaya D. , Gokce H., Ekren N., et al.

Acta Physica Polonica A, cilt.131, no.3, ss.400-402, 2017 (SCI Expanded İndekslerine Giren Dergi)

Hydroxyapatite synthesis from fish bones: Atlantic Salmon (Salmon salar)

Komur B., Altun E., Aydogdu M. O. , Bilgic D., Gokce H., Ekren N., et al.

Acta Physica Polonica A, cilt.131, ss.400-402, 2017 (SCI Expanded İndekslerine Giren Dergi)

Characterization of Cu Ag Eu Hydroxyapatites Composites by Using Wet Chemical Precipitation

Kömür B. H. , Ozturk R. E. , Ekren N., İnan A. T. , Gündüz O. , Andronescu E., et al.

Acta Physica Polonica A, cilt.1, no.1, 2017 (SCI Expanded İndekslerine Giren Dergi)

Drug delivery systems for dental applications

Ficai D., Sandulescu M., Ficai A., Andronescu E., Yetmez M., Ağralı Ö. B. , et al.

Current Organic Chemistry, cilt.21, ss.64-73, 2017 (SCI Expanded İndekslerine Giren Dergi)

Hydroxyapatite Synthesis from Fish Bones: Atlantic Salmon (Salmon Salar)

Kömür B. H. , Altun E., Aydoğdu M. O. , Bilgiç D., Gökçe H., Ekren N., et al.

Acta Physica Polonica A, cilt.131, no.3, ss.400-402, 2017 (SCI Expanded İndekslerine Giren Dergi)

Production of the novel fibrous structure of poly (ε-caprolactone)/tri-calcium phosphate/hexagonal boron nitride composites for bone tissue engineering

Özbek B., Erdoğan B., EKREN N. , OKTAR F. N. , AKYOL S., Ben Nissan B., et al.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, 2017 (SCI Expanded İndekslerine Giren Dergi)

Fabrication of naturel pumice/hydroxyapatite composite for biomedical engineering

Komur B., Lohse T., Can H. M. , Khalilova G., Gecimli Z. N. , Aydogdu M. O. , et al.

BIOMEDICAL ENGINEERING ONLINE, cilt.15, 2016 (SCI İndekslerine Giren Dergi)

Journal of NanomaterialsVolume 2016 2016Nanomaterials for Medical Applications Benefits and Risks

Andronescu E., Brown J. M. , OKTAR F. N. , Agathopoulos S. A. , Chou J., Obata A.

Journal of Nanomaterials, 2016 (SCI Expanded İndekslerine Giren Dergi)

Structural, compositional, mechanical characterization and biological assessment of bovine-derived hydroxyapatite coatings reinforced with MgF2 or MgO for implants functionalization

Mihailescu N., Stan G. E. , Duta L., Chifiriuc M. C. , Bleotu C., Sopronyi M., et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, cilt.59, ss.863-874, 2016 (SCI İndekslerine Giren Dergi)

Tissue Engineering Scaffolds from La2O3 - Hydroxyapatite\Boron Glass Composites

Sych O., GÜNDÜZ O. , Pinchuk N., Stan G. E. , OKTAR F. N.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, cilt.52, ss.103-110, 2016 (SCI İndekslerine Giren Dergi)

Nanotechnology in dentistry

Ficai A., Ficai D., Andronescu E., Yetmez M., Ozkalayci N., AĞRALI Ö. B. , et al.

NANOBIOMATERIALS IN DENTISTRY: APPLICATIONS OF NANOBIOMATERIALS, VOL 11, ss.187-210, 2016 (SCI İndekslerine Giren Dergi)

Crystallization of leucite in potassium-alumino-silicate glasses

Yilmaz S., Agathopoulos S., Oktar F. N.

JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS, cilt.17, ss.681-685, 2015 (SCI İndekslerine Giren Dergi)

Nano-Bioceramic Synthesis from Tropical Sea Snail Shells (Tiger Cowrie - Cypraea Tigris) with Simple Chemical Treatment

Sahin Y. M. , Gunduz O. , Bulut B., Ozyegin L. S. , Gokce H., Agaogullari D., et al.

ACTA PHYSICA POLONICA A, cilt.127, ss.1055-1058, 2015 (SCI İndekslerine Giren Dergi)

Molecular Mechanism and Targets of the Antimicrobial Activity of Metal Nanoparticles

OKTAR F. N. , YETMEZ M., Ficai D., Ficai A., Dumitru F., Pica A.

CURRENT TOPICS IN MEDICINAL CHEMISTRY, cilt.15, ss.1583-1588, 2015 (SCI İndekslerine Giren Dergi)

Conversion of Ostrich Eggshells (Struthio camelus) to Calcium Phosphates

Macha I. J. , Ozyegin L. S. , OKTAR F. N. , Ben-Nissan B.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, cilt.51, ss.125-133, 2015 (SCI İndekslerine Giren Dergi)

Comparative study of Coral Conversion, Part 2: Microstructural evolution of calcium phosphate

Macha i., boonyang U., Cazalbou S., Ben-Nissan B., Charvillat C., OKTAR F. N. , et al.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, cilt.51, ss.149-159, 2015 (SCI İndekslerine Giren Dergi)

Preparation and evaluation of cerium oxide-bovine hydroxyapatite composites for biomedical engineering applications

Gunduz O. , Gode C., Ahmad Z., Gokce H., Yetmez M., Kalkandelen C., et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, cilt.35, ss.70-76, 2014 (SCI İndekslerine Giren Dergi)

Production and Mechanical Properties of Commercial Synthetic Hydroxyapatite CSHA Composites

DEMİRKOL N., OKTAR F. N. , KAYALI E. S.

Key Engineering Materials, cilt.587, ss.33-38, 2014 (SCI Expanded İndekslerine Giren Dergi)

A New Method for Fabrication of Nanohydroxyapatite and TCP from the Sea Snail Cerithium vulgatum

Gunduz O. , Sahin Y. M. , Agathopoulos S., Ben-Nissan B., Oktar F. N.

JOURNAL OF NANOMATERIALS, 2014 (SCI İndekslerine Giren Dergi)

Nanostructured biomaterials with antimicrobial properties

Şahin Y. M. , Yetmez M., Oktar F. N. , Gündüz O. , Agathopoulos S., Andronescu E., et al.

Current Medicinal Chemistry, cilt.21, ss.3391-3404, 2014 (SCI Expanded İndekslerine Giren Dergi)

ZnO Applications and Challenges

Oprea O., Andronescu E., Ficai D., Ficai A., OKTAR F. N. , YETMEZ M.

CURRENT ORGANIC CHEMISTRY, cilt.18, ss.192-203, 2014 (SCI İndekslerine Giren Dergi)

Biological hydroxyapatite thin films synthesized by pulsed laser deposition

Duta L., Serban N., Oktar F. N. , Mihailescu I. N.

OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID COMMUNICATIONS, cilt.7, ss.1040-1044, 2013 (SCI İndekslerine Giren Dergi)

Characterization of calcium phosphate powders originating from Phyllacanthus imperialis and Trochidae Infundibulum concavus marine shells

Tamasan M., Ozyegin L. S. , Oktar F. N. , Simon V.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, cilt.33, ss.2569-2577, 2013 (SCI İndekslerine Giren Dergi)

CALCIUM PHOSPHATE FORMATION FROM SEA URCHIN - (BRISSUS LATECARINATUS) VIA MODIFIED MECHANO-CHEMICAL (ULTRASONIC) CONVERSION METHOD

Samur R. , Ozyegin L., Agaogullari D., Oktar F. N. , Agathopoulos S., Kalkandelen C., et al.

METALURGIJA, cilt.52, ss.375-378, 2013 (SCI İndekslerine Giren Dergi)

Influence of Commercial Inert Glass Addition on the Mechanical Properties of Commercial Synthetic Hydroxyapatite

Demirkol N., OKTAR F. N. , Kayali E. S.

ACTA PHYSICA POLONICA A, cilt.123, ss.427-429, 2013 (SCI İndekslerine Giren Dergi)

Novel doped hydroxyapatite thin films obtained by pulsed laser deposition

Duta L., Oktar F. N. , Stan G. E. , Popescu-Pelin G., Serban N., Luculescu C., et al.

APPLIED SURFACE SCIENCE, cilt.265, ss.41-49, 2013 (SCI İndekslerine Giren Dergi)

An Alternative Synthesis Method for Di Calcium Phosphate (Monetite) Powders from Mediterranean Mussel (Mytilus galloprovincialis) Shells

Macha I. J. , Ozyegin L. S. , Chou J., SAMUR R. , OKTAR F. N. , Ben-Nissan B.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, cilt.49, ss.122-128, 2013 (SCI İndekslerine Giren Dergi)

Sol-gel derived alumina-hydroxyapatite-tricalcium phosphate porous composite powders

Yelten A., Yilmaz S., OKTAR F. N.

CERAMICS INTERNATIONAL, cilt.38, ss.2659-2665, 2012 (SCI İndekslerine Giren Dergi)

Mechanical and Microstructural Properties of Sheep Hydroxyapatite (SHA)-Niobium Oxide Composites

Demirkol N., Oktar F. N. , Kayali E. S.

ACTA PHYSICA POLONICA A, cilt.121, ss.274-276, 2012 (SCI İndekslerine Giren Dergi)

Attachment and Proliferation of Osteoblasts on Lithium-Hydroxyapatite Composites

Shainberg A. P. M. , Valerio P., Zonari A., OKTAR F. N. , Ozyegin L. S. , Graca M. P. F. , et al.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2012 (SCI İndekslerine Giren Dergi)

Bioceramic production from sea urchines

Ağaoglu D., Kel D., Gokce H., Duman I., Öveçoğlu L., Öveçoğlu L., et al.

Acta Physica Polonica A, cilt.121, ss.23-26, 2012 (SSCI İndekslerine Giren Dergi)

Bioceramic Production from Sea Urchins

Agaogullari D., Kel D., Gokce H., Duman I., Ovecoglu M. L. , Akarsubasi A. T. , et al.

ACTA PHYSICA POLONICA A, cilt.121, ss.23-26, 2012 (SCI İndekslerine Giren Dergi)

Bioceramic Production from Sea Urchins

Ağaoğulları D., Kel D., Gökçe H., Duman İ., Öveçoğlu M. L. , Akarsubaşı A. T. , et al.

Acta Physica Polonica A, cilt.212, ss.23-26, 2012 (SCI Expanded İndekslerine Giren Dergi)

Antimicrobial Properties of Electrically Formed Elastomeric Polyurethane Copper Oxide Nanocomposites for Medical and Dental Applications

Ahmad z., VargasReus M., Bakhshi R., Ryan F., Ren G., OKTAR F. N. , et al.

Methods in Enzymology, cilt.509, ss.87-99, 2012 (SSCI İndekslerine Giren Dergi)

MICROSTRUCTURE AND MECHANICAL PROPERTIES OF SINTERED SHEEP ENAMEL-DERIVED HYDROXYAPATITE

Akyurt N., Karacayli U., Yetmez M., Pazarlioglu S. S. , Oktar F. N.

INTERNATIONAL JOURNAL OF ARTIFICIAL ORGANS, cilt.34, ss.700, 2011 (SCI İndekslerine Giren Dergi)

PRODUCTION OF BIOCERAMICS NANO-PARTICLES FROM EGG SHELLS WASTE

Kel D., Karacayli U., Yetmez M., Ozyegin L. S. , Kayali E. S. , Oktar F. N.

INTERNATIONAL JOURNAL OF ARTIFICIAL ORGANS, cilt.34, ss.700, 2011 (SCI İndekslerine Giren Dergi)

COMPOSITES OF HYDROXYAPATITE DOPED WITH NANO-POWDER OF TITANIUM OXIDE

Karacayli U., Yetmez M., Kayali E. S. , Yesilbek B., Gunduz O. , Agathopoulos S., et al.

INTERNATIONAL JOURNAL OF ARTIFICIAL ORGANS, cilt.34, ss.699-700, 2011 (SCI İndekslerine Giren Dergi)

HYDROXYAPATITE PRODUCTION WITH VARIOUS TECHNIQUES FROM SEA URCHIN

Kel D., Karacayli U., Yetmez M., Gokce H., Agaogullari D., Ovecoglu M. L. , et al.

INTERNATIONAL JOURNAL OF ARTIFICIAL ORGANS, cilt.34, ss.700, 2011 (SCI İndekslerine Giren Dergi)

MICROSTRUCTURE AND MECHANICAL PROPERTIES OF COMPOSITES OF BOVINE DERIVED HYDROXYAPATITE (BHA) DOPED WITH NANO-POWDER OF LANTHANUM OXIDE

Pazarlioglu S. S. , Karacayli U., Salman S., Yetmez M., Ozyegin L. S. , Yilmaz S., et al.

INTERNATIONAL JOURNAL OF ARTIFICIAL ORGANS, cilt.34, ss.700-701, 2011 (SCI İndekslerine Giren Dergi)

A NEW SAFE METHOD TO PRODUCE BIOCERAMIC NANO-POWDERS FROM NACRE VENUS VERRUCOSA

Oktar F. N. , Tuyel U., Demirkol N., Gunduz O. , Samur R. , Kannan S., et al.

INTERNATIONAL JOURNAL OF ARTIFICIAL ORGANS, cilt.33, ss.467-468, 2010 (SCI İndekslerine Giren Dergi)

MECHANICAL PROPERTIES OF HYDROXYAPATITE-TANTALUM COMPOSITES

Yetmez M., Demirkol N., Oktar F. N. , Gunduz O. , Kayali S., Agathopoulos S.

INTERNATIONAL JOURNAL OF ARTIFICIAL ORGANS, cilt.33, ss.467, 2010 (SCI İndekslerine Giren Dergi)

MECHANICAL PROPERTIES OF BOVINE ENAMEL DERIVED HYDROXYAPATITE

Demirkol N., Yetmez M., Karacayli U., Kayali E. S. , Gunduz O. , Agathopoulos S., et al.

INTERNATIONAL JOURNAL OF ARTIFICIAL ORGANS, cilt.33, ss.468, 2010 (SCI İndekslerine Giren Dergi)

Biological activities of bioceramic powders of various natural biological origins

Tuyel A. U. , Valerio P., Oner E. T. , Oktar F. N.

NEW BIOTECHNOLOGY, cilt.25, 2009 (SCI İndekslerine Giren Dergi)

Sintering effect on mechanical properties of composites of natural hydroxyapatites and titanium

Salman S., Gunduz O. , Yilmaz S., Ovecoglu M. L. , Snyder R. L. , Agathopoulos S., et al.

CERAMICS INTERNATIONAL, cilt.35, ss.2965-2971, 2009 (SCI İndekslerine Giren Dergi)

Reinforcing of Biologically Derived Apatite with Commercial Inert Glass

Gunduz O. , Ahmad Z., Ekren N. , Agathopoulos S., Salman S., Oktar F. N.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, cilt.22, ss.407-419, 2009 (SCI İndekslerine Giren Dergi)

Effect of sintering temperature on mechanical properties and microstructure of sheep bone derived hydroxyapatite SHA

Karacali U., GÜNDÜZ O. , SALMAN S. , Ozyegin s., Agathopoulos S., OKTAR F. N.

13th International Conference on Biomedical Engineering, 2009 (SCI Expanded İndekslerine Giren Dergi)

Effect of yttria-doping on mechanical properties of bovine hydroxyapatite (BHA)

Gunduz O. , Daglilar S., Salman S., Ekren N. , Agathopoulos S., Oktar F. N.

Journal of Composite Materials, cilt.42, ss.1281-1287, 2008 (SCI Expanded İndekslerine Giren Dergi)

Composites of bovine hydroxyapatite (BHA) and ZnO

GÜNDÜZ O. , Erkan E. M. , DAĞLILAR S., SALMAN S. , Agathopoulos S., OKTAR F. N.

JOURNAL OF MATERIALS SCIENCE, cilt.43, ss.2536-2540, 2008 (SCI İndekslerine Giren Dergi)

Histomorphometric evaluation of implants coated with enamel or dentine derived fluoride-substituted apatite

KÜRKÇÜ M., BENLİDAYI M. E. , Ozsoy S., Ozyegin L. S. , OKTAR F. N. , KURTOĞLU C.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE, cilt.19, ss.59-65, 2008 (SCI İndekslerine Giren Dergi)

Microstructural and mechanical properties of hydroxyapatite-zirconia composites

Erkmen Z. E. , Genc Y., Oktar F. N.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, cilt.90, ss.2885-2892, 2007 (SCI İndekslerine Giren Dergi)

Water resistance of bone-cements reinforced with bioceramics

Daglilar S., Erkan M. E. , Gunduz O. , Ozyegin L. S. , Salman S., Agathopoulos S., et al.

MATERIALS LETTERS, cilt.61, ss.2295-2298, 2007 (SCI İndekslerine Giren Dergi)

Microstructure and mechanical properties of sintered enamel hydroxyapatite

Oktar F. N.

CERAMICS INTERNATIONAL, cilt.33, ss.1309-1314, 2007 (SCI İndekslerine Giren Dergi)

Mechanical properties of bovine hydroxyapatite BHA composites doped with SiO2 MgO Al2O3 and ZrO2

Oktar F. N. , Agatapolous S., Özeyğin S., Gündüz O. , Demirkol N., Bozkurt Y. , et al.

Journal Of Materials Science-Materials In Medicine, cilt.18, no.1, ss.2137-2143, 2007 (SSCI İndekslerine Giren Dergi)

Bond-coating in plasma-sprayed calcium-phosphate coatings

Oktar F. N. , Yetmez M., Agathopoulos S., Goerne T. M. L. , Goller G., Ipeker I., et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE, cilt.17, ss.1161-1171, 2006 (SCI İndekslerine Giren Dergi)

Hydroxyapatite-TiO2 composites

OKTAR F. N.

MATERIALS LETTERS, cilt.60, ss.2207-2210, 2006 (SCI İndekslerine Giren Dergi)

Influence of sintering temperature on mechanical properties of biologically derived hydroxyapatite bodies

OKTAR F. N. , Aydin H., Göller G., Agathopoulos S., Rocha G., SENNAROĞLU B. , et al.

Key Engineering Materials, ss.45-48, 2006 (SCI İndekslerine Giren Dergi)

Sintering effect on mechanical properties of composites of hydroxyapatite lanthanum oxide (HA-La2O3)

OKTAR F. N. , Ozyegin S., Meydanoglu O., Aydin H., Agathopoulos S., Rocha G., et al.

Key Engineering Materials, ss.101-104, 2006 (SCI İndekslerine Giren Dergi)

Effect of sintering temperature on mechanical and microstructural properties of bovine hydroxyapatite (BHA)

GÖLLER G., OKTAR F. N. , Agathopoulos S., Tulyaganov D., Ferreira C., KAYALI E. S. , et al.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, cilt.37, ss.111-115, 2006 (SCI İndekslerine Giren Dergi)

Hydroxyapatite nano-powders produced hydrothermally from nacreous material

Lemos A. F. , Rocha J. H. G. , Quaresma S. S. F. , Kannan S., Oktar F. N. , Agathopoulos S., et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, cilt.26, ss.3639-3646, 2006 (SCI İndekslerine Giren Dergi)

Plasma sprayed zirconia hydroxyapatite composite coatings

Aydin M., Ozyegin L., OKTAR F. N. , ERKMEN Z. E. , Anzabi O., Gross K.

Key Engineering Materials, cilt.309, ss.631-634, 2006 (SSCI İndekslerine Giren Dergi)

Scaffolds for bone restoration from cuttlefish

Rocha J., Lemos A., Agathopolous S., Valerio P., Kannan S., OKTAR F. N. , et al.

Bone, cilt.37, ss.850-857, 2005 (SSCI İndekslerine Giren Dergi)

The influence of sintering temperature on mechanical and microstructural properties of bovine hydroxyapatite

GÖLLER G., OKTAR F. N. , Agathopoulos S., Tulyaganov D., Ferreira J., Kayali E., et al.

BIOCERAMICS 17, ss.325-328, 2005 (SCI İndekslerine Giren Dergi)

Sintering effect on mechanical properties of enamel derived andsynthetic hydroxyapatite zirconia composites

GENÇ Y., OKTAR F. N. , ERKMEN Z. E. , GÖLLER G., TOYKAN D., HAYBAT H.

EURO CERAMICS VIII, PTS 1-3, cilt.264, ss.1961-1964, 2004 (SCI Expanded İndekslerine Giren Dergi)

Sintering of synthetic hydroxyapatite compacts

OKTAR F. N. , Genç Y., GÖLLER G., ERKMEN Z. E. , Özyeğin L., Toykan D., et al.

Key Engineering Materials, cilt.264, ss.2087-2090, 2004 (SSCI İndekslerine Giren Dergi)

Plasma sprayed bovine hydroxyapatite coatings

Ozyeğin S., OKTAR F. N. , GÖLLER G., KAYALI E. S. , Yazici T.

Material Letters, cilt.58, ss.2605-2609, 2004 (SSCI İndekslerine Giren Dergi)

Sintering of Syntetic Hydroxyapatite Zirconia Compacts

Genç Y., OKTAR F. N. , ERKMEN Z. E. , GÖLLER G., Derya T., Toykan D., et al.

Key Engineering Materrials, cilt.264268, ss.2087-2090, 2004 (SCI Expanded İndekslerine Giren Dergi)

Processing and characterization of bioglass reinforced hydroxyapatite composites

GÖLLER G., Demirkıran H., OKTAR F. N. , Demirkesen E.

Ceramics International, cilt.9, ss.721-724, 2003 (SSCI İndekslerine Giren Dergi)

Sintering effects on mechanical properties of biologically derived dentine hydroxyapatite

GÖLLER G., OKTAR F. N.

Materials Letters, cilt.56, ss.142-147, 2002 (SSCI İndekslerine Giren Dergi)

Sintering effects on mechanical properties of glass reinforced hydroxyapatite composites

OKTAR F. N. , GÖLLER G.

Ceramics International, cilt.28, ss.617-621, 2002 (SSCI İndekslerine Giren Dergi)

Characterization of processed tooth hydroxyapatite for potential biomedical implant applications

OKTAR F. N. , Kesenci K., Piskin E.

ARTIFICIAL CELLS BLOOD SUBSTITUTES AND IMMOBILIZATION BIOTECHNOLOGY, cilt.27, ss.367-379, 1999 (SCI İndekslerine Giren Dergi)

Diğer Dergilerde Yayınlanan Makaleler

3D printed bioactive composite scaffolds for bone tissue engineering

Moukbil Y., Isindag B., Gayir V., Ozbek B., Haskoylu M. E. , Oner E. T. , et al.

Bioprinting, cilt.17, 2020 (Diğer Kurumların Hakemli Dergileri)

Biohydrogels for medical applications: A short review

Moukbil Y., OKTAR F. N. , Ozbek B., Ficai D., Ficai A., Andronescu E., et al.

ORGANIC COMMUNICATIONS, cilt.11, ss.123-141, 2018 (ESCI İndekslerine Giren Dergi)

Production and Characterization of Whey Protein Concentrate (WPC) Based Nano-Fibers

OKTAR F. N. , Su S., Özbek B., YÜCEL S., KAZAN D. , GÜNDÜZ O.

CROSS-DISCIPLINARY APPLIED RESEARCH IN MATERIALS SCIENCE AND TECHNOLOGY, 2018 (Diğer Kurumların Hakemli Dergileri)

Electrical Properties of Clinoptilolite/Aluminium Oxide/Bovine Hydroxyapatite Composites

Kalkandelen C., Moukbil Y., Oktar F. N. , Ekren N. , Kılıç O. , Gündüz O.

CROSS-DISCIPLINARY APPLIED RESEARCH IN MATERIALS SCIENCE AND TECHNOLOGY, cilt.2018, no.1, ss.98-101, 2018 (Diğer Kurumların Hakemli Dergileri)

3D Liquid Bioprinting of the PCL/β-TCP Scaffolds

Aydoğdu M. O. , Ekren N. , Kılıç O. , Oktar F. N. , Gündüz O.

CROSS-DISCIPLINARY APPLIED RESEARCH IN MATERIALS SCIENCE AND TECHNOLOGY, cilt.2018, no.1, ss.79-83, 2018 (Diğer Kurumların Hakemli Dergileri)

Microstructural and Mechanical Properties of Nano-Yttria-Oxide Doped Hydroxyapatite Composites

Gündüz O. , Yetmez M., Ekren N. , Kılıç O. , Ben Nissan B., Oktar F. N.

CROSS-DISCIPLINARY APPLIED RESEARCH IN MATERIALS SCIENCE AND TECHNOLOGY, cilt.2018, no.1, ss.89-92, 2018 (Diğer Kurumların Hakemli Dergileri)

Production and Characterization of Antimicrobial Electrospun Nanofibers Containing Polyurethane, Zirconium Oxide and Zeolite

Aydogdu M. O. , Oprea A. E. , Trusca R., Surdu A. V. , Ficai A., Holban A. M. , et al.

BIONANOSCIENCE, cilt.8, ss.154-165, 2018 (ESCI İndekslerine Giren Dergi)

Adhesion and Scratch Testing of Antibiotic Loaded Poly-Lactic Acid Biocomposite Thin Films on Metallic Implants

KARACAN I., Chou J., Ben Nissan B., Macha I. J. , Arion J., Wang A. H. , et al.

Key Engineering Materials, cilt.782, ss.195-200, 2018 (Diğer Kurumların Hakemli Dergileri)

Effect of temperature, viscosity and surface tension on gelatine structures produced by modified 3D printer

Kalkandelen C., Özbek B., Ergül N. M. , Akyol S., Moukbil Y., Oktar F. N. , et al.

IOP Conference Series: Materials Science and Engineering, cilt.1, no.1, 2017 (Diğer Kurumların Hakemli Dergileri)

Natural Hydoxyapatite Syntheis from Fish Bone Atlantic Bonito sarda sarda

GÜNDÜZ O. , KILIÇ O. , EKREN N. , gökçe h., KALKANDELEN C., OKTAR F. N.

Key Engineering Materials, 2016 (Diğer Kurumların Hakemli Dergileri)

Production of Apatite from Shellsfor Biomedical Engineering Applications

EKREN N. , GÜNDÜZ O. , çelik s., ayata b., ŞAHİN Y. M. , chou j., et al.

Key Engineering Materials, cilt.696, ss.51-56, 2016 (Diğer Kurumların Hakemli Dergileri)

Can European Sea Bass Dicentrarchus labrax Scale Be a Good Candidate for Nano Bioceranics Production

Şahin Y. M. , Gündüz O. , Ficai A., Ekren N. , Tuna A., İnan A. T. , et al.

Key Engineering Materials, cilt.1, no.1, 2016 (Diğer Kurumların Hakemli Dergileri)

Production of Apatite from Snail Shells for Biomedical EngineeringApplications

Ekren N. , Gündüz O. , Çelik S., Ayata B., Şahin Y. M. , Chou J., et al.

Key Engineering Materials, cilt.696, no.1, ss.51-56, 2016 (Diğer Kurumların Hakemli Dergileri)

Mechanical behavior of PCL Nano fibers

Keler M. K. , Dağlılar S., Gündüz O. , Yüksek M., Şahin Y. M. , Ekren N. , et al.

Key Engineering Materials, cilt.696, no.1, ss.196-201, 2016 (Diğer Kurumların Hakemli Dergileri)

Novel Bioceramic Production via Mechanochemical Conversion from Plate Limpet Tectura scutum Shells

İnan A. T. , Gündüz O. , Şahin Y. M. , Ekren N. , Salman S. , Joshua C., et al.

Key Engineering Materials, cilt.696, no.1, ss.45-50, 2016 (Diğer Kurumların Hakemli Dergileri)

Structural and Characterization Analysis of Zinc Substituted Hydroxyapatite Zn HAp with Wet Chemical Precipitation Method

Karacan I., Oktar F. N. , Senturk D., Ficai A., Ficai D., Trusca R., et al.

International Journal of Nano and Biomaterials, cilt.1, no.1, 2016 (Diğer Kurumların Hakemli Dergileri)

Structural and characterisation analysis of zinc-substituted hydroxyapatite with wet chemical precipitation method

Karacan I., Senturk D., Oktar F. N. , Ficai A., Ficai D., Trusca R., et al.

International Journal of Nano and Biomaterials, cilt.6, ss.188-204, 2016 (Diğer Kurumların Hakemli Dergileri)

Can European Sea Bass Dicentrarchus labrax Scale Be a GoodCandidate for Nano Bioceramics Production

Şahin Y. M. , Gündüz O. , Ficai A., Ekren N. , Tuna A., İnan A. T. , et al.

Key Engineering Materials, cilt.696, no.1, ss.60-65, 2016 (Diğer Kurumların Hakemli Dergileri)

Bioceramic Production from Giant Purple Barnacle i Megabalanus i i tintinnabulum i

Oktar F. N. , Gökçe H., Gündüz O. , Şahin Y. M. , Duygu A., İrene T., et al.

Key Engineering Materials, cilt.631, no.1, ss.137-142, 2015 (Diğer Kurumların Hakemli Dergileri)

Bioceramic Production from Giant Purple Barnacle Megabalanus tintinnabulum

Oktar F. N. , Gokçe H., Gündüz O. , Şahin Y. M. , Ağaoğulları D., Turner I. G. , et al.

Key Engineering Materials, cilt.631, no.1, ss.137-142, 2015 (Diğer Kurumların Hakemli Dergileri)

Nano Bioceramics Production from Razor Shell

Agathopoulos S., Ozyegin L., Ahmad Z., Gündüz O. , Kayalı E. S. , Meydanoğlu O., et al.

Key Engineering Materials, cilt.493494, no.1, ss.775-780, 2012 (Diğer Kurumların Hakemli Dergileri)

Production of Natural Bioceramic from Land Snails

Kel D., Gökçe H., Bilğiç Alkaya D. , Ağaoğulları D., Duman İ., Öveçoğlu M. L. , et al.

Key Engineering Materials, cilt.493, ss.287-292, 2012 (Diğer Kurumların Hakemli Dergileri)

A New Natural Biomaterial Sheep Dentine Derived Hydroxyapatite

Akyurt N. , Yetmez M., Karacayli U., Gündüz O. , Agathopoulos S., Gokce H., et al.

Key Engineering Materials, cilt.493494, no.1, ss.281-286, 2011 (Diğer Kurumların Hakemli Dergileri)

Predicting the Mechanical Properties of BHA Li2O Composites Using Artificial Neural Networks

Çelik H. H. , Gündüz O. , Ekren N. , Ahmad Z., Oktar F. N.

Journal of Biomaterials and Nanobiotechnology, cilt.2, no.1, ss.98-101, 2011 (Diğer Kurumların Hakemli Dergileri)

Katodik Vakum Ark Yöntemi İle Kaplanan ZrN Kaplamalara Pulse Bias Voltajının Etkisi

GÜNDÜZ O. , OKTAR F. N. , SALMAN S.

Journal of Engineering and Natural Sciences Mühendislik ve Fen Bilimleri Dergisi, cilt.3, ss.49-57, 2006 (Diğer Kurumların Hakemli Dergileri)

EFFECT OF PULSE BIAS VOLTAGE ON ZrN COATINGS BY CATHODIC VACUUM ARC

OKTAR F. N. , GÜNDÜZ O. , SALMAN S.

ournal of Engineering and Natural Sciences Mühendislik ve Fen Bilimleri Dergisi, YTU, Istanbul,, cilt.1, ss.49-57, 2005 (Diğer Kurumların Hakemli Dergileri)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Production of 3D-Printed Tympanic Membrane Scaffolds as a Tissue Engineering Application

Ilhan E., Ulag S., Şahin A. , Ekren N. , Kılıç O. , Oktar F. N. , et al.

8th International Work-Conference on Bioinformatics and Biomedical Engineering, IWBBIO 2020, Granada, İspanya, 6 - 08 Mayıs 2020, ss.175-184

Production and Characterization of HA Coated GO/PCL 3D Printing Scaffold for Bone Tissue Engineering

Özen S., Topsakal A., Özbek B., Rüya Ege Z., Ekren N. , Terzi Ü. K. , et al.

IWBBIO 2019 (7th International Work-Conference on Bioinformatics and Biomedical Engineering), Granada, İspanya, 8 - 10 Mayıs 2019

Production and characterization of hexagonal boron nitride doped three-dimensional scaffolds for bone tissue engineering

Aki D., Cengiz S., Ulağ S., ÜNAL S. , KILIÇ O. , EKREN N. , et al.

IWBBIO 2019 (7th International Work-Conference on Bioinformatics and Biomedical Engineering), 8 - 10 Mayıs 2019

Investigation of the Polycaprolactone/Polyvinylpyrrolidone basedBiocomposite Constructs for Cartilage Impairment by using 3D Plotting

İzgördü M. S. , Ulag S., OKTAR F. N. , KILIÇ O. , EKREN N. , GÜNDÜZ O.

IWBBIO 2019 (7th International Work-Conference on Bioinformatics and Biomedical Engineering), 8 - 10 Mayıs 2019

Characteristic properties of 3D Printed Polycaprolactone/Polyvinylpyrrolidone/Chitosan Constructs for Cartilage Tissue Engineering

Uzgur E. İ. , Ulağ S., OKTAR F. N. , KILIÇ O. , EKREN N. , GÜNDÜZ O.

IWBBIO 2019 (7th International Work-Conference on Bioinformatics and Biomedical Engineering), 8 - 10 Mayıs 2019

Effect of the Sintering Temperature on Hydroxyapatite Powder Synthesized by Sol-Gel Method

Ergül N. M. , Özen G., EKREN N. , OKTAR F. N. , Mahiroğulları M., GÜNDÜZ O.

IWBBIO 2019 (7th International Work-Conference on Bioinformatics and Biomedical Engineering), 8 - 10 Mayıs 2019

Hyaluronic acid-modified bacterial cellulose scaffolds for three-dimensional glioblastoma model

ÜNAL S. , Arslan S., Karademir B., GÜNDÜZ O. , OKTAR F. N.

International Work-Conference on Bioinformatics and Biomedical Engineering (IWBBIO 2019), 8 - 10 Mayıs 2019

Synthesis and Characterization of Hydroxyapatite by Wet Chemical Precipitation at Different pH and Sintering Temperature

Mahmutoğlu G., Topsakal A., KUŞKONMAZ N., DAĞLILAR S., OKTAR F. N. , GÜNDÜZ O.

International Work-Conference on Bioinformatics and Biomedical Engineering (IWBBIO 2019), 8 - 10 Mayıs 2019

Investigation of the Polycaprolactone/Polyvinypyrrolidone based Biocomposite Constructs for Cartilage Impairment by using 3D Plotting

İzgördü M. S. , Ulağ S., OKTAR F. N. , KILIÇ O. , EKREN N. , GÜNDÜZ O.

International Work-Conference on Bioinformatics and Biomedical Engineering (IWBBIO 2019), 8 - 10 Mayıs 2019

Fabrication of Poly(EthyleneOxide)/Chitosan/Indocyanine Green Nanoprobeby Co-Axial Electrospinning Method for EarlyDetection

Eğe Z. R. , AKAN A., OKTAR F. N. , KARADEMİR B. , GÜNDÜZ O.

ICNMA: 2018 20th International Conference on Nanostructured Materials and Applications, 13 - 14 Eylül 2018

Fabrication and Characterization of Hazelnut ShellPowder with Reinforced Polymer CompositeNanofibers

Şengör İ., Cesur S., KARTAL İ. , OKTAR F. N. , EKREN N. , İNAN A. T. , et al.

ICNMA: 2018 20th International Conference on Nanostructured Materials and Applications, 13 - 14 Eylül 2018

Hydroxyapatıte Is Bıomaterıals: Its Chemıcal Synthesıs Characterızatıon Shell Of Cypaea Annulus

BİLĞİÇ ALKAYA D. , AYAZ SEYHAN S. , ÖZTÜRK B. N. , CESUR S., TOPSAKAL A., OKTAR F. N. , et al.

KOMPEGE 2018-IV. International Composite Material Symposium 2018, 6 - 09 Eylül 2018

Preparation And Characterization Of Silver-Doped Hydroxyapatite From Seashell By Different Methods

AYAZ SEYHAN S. , BİLĞİÇ ALKAYA D. , ÖZTÜRK B. N. , CESUR S., TOPSAKAL A., OKTAR F. N. , et al.

KOMPEGE 2018-IV. International Composite Material Symposium 2018”, 6 - 09 Eylül 2018

Preparatıon Of Hydroxyapatıte Bıomaterıals For Benzoıc Acıd Delıvery From Scotch Bonnets Seashell By Mıcrowave Processıng

ÖZTÜRK B. N. , BİLĞİÇ ALKAYA D. , AYAZ SEYHAN S. , CESUR S., TOPSAKAL A., OKTAR F. N. , et al.

KOMPEGE 2018-IV. International Composite Material Symposium 2018”, 6 - 09 Eylül 2018

Production of the GO-doped PLA-based nanofibers and investigation of their electrical properties

ÖZEN S., AYDOĞDU M. O. , EĞE Z. R. , CESUR S., TERZİ Ü. K. , KORKMAZ H. , et al.

4th International Conference on Biomedical Polymers Polymeric Biomaterials, 15 - 18 Temmuz 2018

Polycaprolactone/Beta TricalciumPhosphate/ Collagen as a 3D PrintedTissue Scaffold

Aydoğdu M. O. , EKREN N. , OKTAR F. N. , KILIÇ O. , GÜNDÜZ O.

4th International Society for Biomedical Polymers and Polymeric Biomaterials (ISBPPB) conference, 15 - 18 Temmuz 2018

Fabrication and Characterization of PLA/SA/HA Composite Nanofiber by Electrospinning for Bone Tissue Engineering Applications

CESUR S., EKREN N., KILIÇ O. , OKTAR F. N. , BİLĞİÇ ALKAYA D. , AYAZ SEYHAN S. , et al.

4th International Conference on Biomedical Polymers Polymeric Biomaterials (ISBPPB 2018), 15 - 18 Temmuz 2018

Investıgatıon Of Chıtosan / Trıcalcıum Phosphate (Tcp) Composıte Powders From Scotch Bonnets ( Semıcassıs Granulata) As A Drug Controlled Release Matrıces

BİLĞİÇ ALKAYA D. , AYAZ SEYHAN S. , CESUR S., GÜNDÜZ O. , OKTAR F. N.

ISBPPB 4th International Society for Biomedical Polymers and Polymeric Biomaterials, 15 - 18 Temmuz 2018

PRODUCTION of HYDROXYAPATITE–POLY(VINYL ALCOHOL) BASED SCAFFOLD for DRUG DELIVERY from ORANGE SPINY OYSTER SEASHELL (SPONDYLUS BARBATUS)

AYAZ SEYHAN S. , BİLĞİÇ ALKAYA D. , CESUR S., OKTAR F. N. , GÜNDÜZ O.

ISBPPB 4th International Society for Biomedical Polymers and Polymeric Biomaterials (ISBPPB), 15 - 18 Temmuz 2018

ENCAPSULATION OF SYNTHESIZED HYDROXYAPATITE IN PCLMICROSPHERES BY USING ELECTROSPRAYING METHOD

Bozkurt Y. , Ergul N. M. , Ozbek B., Ekren N. , Salman S. , Oktar F. N. , et al.

4 TH INTERNATIONAL CONFERENCE ON ENGINEERING AND NATURAL SCIENCES, Lviv, Ukrayna, 02 Mayıs 2018, cilt.1, ss.753-760

Effect of temperature, viscosity and surface tension on gelatine structures produced by modified 3D printer

Kalkandelen C., Ozbek B., Ergul N. M. , Akyol S., Moukbil Y., Oktar F. N. , et al.

3rd International Conference on Smart Material Research (ICSMR), Melbourne, Avustralya, 15 - 17 Kasım 2017, cilt.293

DC and AC conductivity properties of bovine dentine hydroxyapatite (BDHA)

Dumludag F., Gunduz O. , Kilic O., Ekren N. , Kalkandelen C., Ozbek B., et al.

3rd International Conference on Smart Material Research (ICSMR), Melbourne, Avustralya, 15 - 17 Kasım 2017, cilt.293

Effects of sintering temperature on electrical properties of sheep enamel hydroxyapatite

Dumludag F., Gunduz O. , Kilic O., Kilic B., Ekren N. , Kalkandelen C., et al.

3rd International Conference on Smart Material Research (ICSMR), Melbourne, Avustralya, 15 - 17 Kasım 2017, cilt.293

Effects of Sintering Temperature on Electrical Properties of Sheep Enamel Hydroxyapatite

DUMLUDAĞ F., GÜNDÜZ O. , KILIÇ O. , KILIÇ B., EKREN N. , KALKANDELEN C., et al.

ICSMR2017, 3rd International Conference on Smart Material Research, Melbourne, Avustralya, 15 - 17 Kasım 2017

Effect of temperature, viscosity and surface tension on gelatine structures produced by modified 3D printer

KALKANDELEN C., Ozbek B., Ergul N. M. , Moukbil Y., OKTAR F. N. , EKREN N. , et al.

2017 2nd International Conference on Frontiers of Composite Materials (ICFCM2017), 15 - 17 Kasım 2017

DC and AC conductivity properties of bovine dentine hydroxyapatite (BDHA)

DUMLUDAĞ F., GÜNDÜZ O. , KILIÇ O. , EKREN N. , KALKANDELEN C., Ozbek B., et al.

2nd International Conference on Frontiers of Composite Materials (ICFCM2017), 15 - 17 Kasım 2017

Microstructural and Mechanical Properties of Nano-Yttria-Oxide doped Hydroxyapatite Composites

GÜNDÜZ O. , YETMEZ M., EKREN N. , KILIÇ O. , Bennissan B., OKTAR F. N.

2017 2nd International Conference on Frontiers of Composite Materials (ICFCM2017), 15 - 17 Kasım 2017

Production and Characterization of Whey Protein Concentrate (WPC) based Nano-fibers

OKTAR F. N. , Su S., Ozbek B., YÜCEL S., KAZAN D. , GÜNDÜZ O.

2nd International Conference on Frontiers of Composite Materials (ICFCM2017), 15 - 17 Kasım 2017

Electrical Properties of Clinoptilolite/Aluminium Oxide/Bovine Hydroxyapatite Composites

KALKANDELEN C., Moukbil Y., OKTAR F. N. , EKREN N. , KILIÇ O. , GÜNDÜZ O.

2nd International Conference on Frontiers of Composite Materials (ICFCM2017), 15 - 17 Kasım 2017

3D Liquid Bioprinting of the PCL / β-TCP Scaffolds

Aydogdu M. O. , EKREN N. , KILIÇ O. , OKTAR F. N. , GÜNDÜZ O.

2017 2nd International Conference on Frontiers of Composite Materials (ICFCM2017), 15 - 17 Kasım 2017

Effects of sintering temperature on electrical properties of sheep enamel hydroxyapatite

Dumludağ F. , Gündüz O. , Kılıç O. , Kılıç B., Ekren N. , Kalkandelen C., et al.

ICSMR 2017, 2017 3rd International Conference on Smart Material Research, Melbourne, Avustralya, 15 - 17 Kasım 2017, ss.21

DC and AC Conductivity Properties of Bovine Dentine Hydroxyapatite (BDHA)

Dumludağ F. , Gündüz O. , Kılıç O. , Ekren N. , Kalkandelen C., Özbek B., et al.

ICSMR2017, 3rd International Conference on Smart Material Research, Melbourne, Avustralya, 15 - 17 Kasım 2017, ss.21

Preparation, Characterization and Properties of Melatonin-loaded Polycaprolactone Microspheres as a Drug Delivery System

Ergul N. M. , Ozbek B., Ozbeyli D., EKREN N. , OKTAR F. N. , AKYOL S., et al.

International Meeting on Education and Research in Health Sciences, 3 - 05 Kasım 2017

Production of Biocompatible Poly(E- CAPROLACTONE) / Tri-Calcium Phosphate/ Hegzagonal Boron Nitride Fibrous Composites

Özbek B., Ergül N. M. , EKREN N. , OKTAR F. N. , Mergen A., KALKANDELEN C., et al.

International Materials Technologies and Metallurgy Conference 2017, 26 - 27 Ekim 2017

Controlled Releasing of Vanillin from Electrosprayed Starch Nanoparticles

İNAN A. T. , Ege Z. R. , KALKANDELEN C., OKTAR F. N. , AKAN A., GÜNDÜZ O.

International Materials technologies and Metallurgy Conference 2017, 26 - 27 Ekim 2017

Mechanical and Microstructural Properties of Animal Derived Hydroxyapatite Obtained from Camel Bone

Bulut B., GÜNDÜZ O. , Geçimli Z., OKTAR F. N. , KAYALI E. S.

29th Symposium and Annual Meeting of the International Society for Ceramics in Medicine, 25 Ekim - 27 Aralık 2017

Microstructural and Mechanical Properties of Nano-titaniumoxide Reinforced Bovine Hydroxyapatite Composites

OKTAR F. N. , Gökçe H., YETMEZ M., Agathopoulos S., KAYALI E. S. , Besim B. N. , et al.

29th Symposium and Annual Meeting of International Society for Ceramic in Medicine, 25 Ekim - 27 Aralık 2017

Characterization of bovine Hydroxyapatite-Niobium (V) Oxide Bioceramics Composites Produced with Spark Plasma Sintering

Bulut B., Tazegül O., GÜNDÜZ O. , OKTAR F. N. , KAYALI E. S.

29th Symposium and Annual Meeting of the International Society for Ceramics in Medicine, 25 Ekim - 27 Aralık 2017

Fabrication of Natural Hydroxyapatite from Gilthead Seabream (Sparus aurata)

EKREN N. , GÜNDÜZ O. , Gökçe H., KALKANDELEN C., KAYALI E. S. , Ben Nissan B., et al.

29th Symposium and Annual Meeting of the International Society for Ceramics in Medicine, 25 - 27 Ekim 2017

Production of Starch Nanoparticles by Electrospraying as a Delivery System for Vanillin

Ege Z. R. , AKAN A., OKTAR F. N. , Kalkandelen C., GÜNDÜZ O.

Medical Technologies National Congress (TIPTEKNO), Trabzon, Türkiye, 12 - 14 Ekim 2017

Process Optimization of Electrospun Fish Sarcoplasmic Protein BasedNanofibers

su s., Ozbek b., ŞAHİN Y. M. , YÜCEL S., KAZAN D. , OKTAR F. N. , et al.

FN 2017 : 19th International Conference on Food Nanotechnology, 17 - 18 Ağustos 2017

Hafnium and Samarium Hydroxyapatite Composites and TheirCharacterization

Erdol M. N. , Bayrak F., Emanetci E., OKTAR F. N. , KALKANDELEN C., GÜNDÜZ O.

ICBBS 2017 : 19th International Conference on Bioengineering and Biomedical Science, 17 - 18 Ağustos 2017

Process Optimization of Electrospun Fish Sarcoplasmic Protein Based Nanıfibers

Su S., Ozbek B., Sahin Y., Yucel S., KAZAN D. , OKTAR F. N. , et al.

19th International Conference on Food Nanotechnology, 17 - 18 Ağustos 2017

Production of the PCL/Zinc Oxide/Silver Nitrate Nanofibrous Scaffolds with Enhanced Antimicrobial Activity Using Co- Axial Electrospinning Method

Aydogdu M. O. , Cetin G., Altun E., EKREN N. , OKTAR F. N. , KILIÇ O. , et al.

13th International Conference on Materials Chemistry (MC13), 10 - 13 Temmuz 2017

Novel Electrospun Polycaprolactone/Graphene Oxide/Fe3O4 Nanocomposites for Biomedical Applications

GÜNDÜZ O. , Aydogdu M. O. , EKREN N. , OKTAR F. N. , KURUCA D. S. , suleymanoglu m., et al.

13th International Conference on Materials Chemistry (MC13), 10 - 13 Temmuz 2017

Production of the novel nanofibers of poly (ε-caprolactone)/tri-calcium phosphate/hexagonal boron nitride composites for bone tissue engineering

Erdogan B., EKREN N. , OKTAR F. N. , GÜNDÜZ O.

13th International Conference on Materials Chemistry (MC13), 10 - 13 Temmuz 2017

Production of Bone Tissue Engineering Nanofiber Scaffold by Electrospinning Method

Ozcan A., Ugar G., Topsakal A., Altun E., OKTAR F. N. , EKREN N. , et al.

The Tenth Japanese-Mediterranean Workshop on AppliedElectromagnetic Engineering for Magnetic, Superconducting, Multifunctional and Nanomaterials(JAPMED’10), 4 - 08 Temmuz 2017

Natural hydroxyapatite synthesis from fish bones: "Atlantic Bonito" (Sarda sarda)

GÜNDÜZ O. , KILIÇ O. , EKREN N. , Gökçe H., Kalkandelen C., OKTAR F. N.

28th Annual Meeting of the International Society for Ceramics in Medicine, Bioceramics 2016, North-Carolina, Amerika Birleşik Devletleri, 18 - 21 Ekim 2016, cilt.720, ss.207-209

Mechanical and physical properties of dentine-glass composites

Ozbek B., KILIÇ O. , GÜNDÜZ O. , EKREN N. , Gökçe H., OKTAR F. N.

28th Annual Meeting of the International Society for Ceramics in Medicine, Bioceramics 2016, North-Carolina, Amerika Birleşik Devletleri, 18 - 21 Ekim 2016, cilt.720, ss.257-263

Electrospun Nanocomposite Materials, A Novel Synergy of Polyurethane and Bovine Derived Hydroxyapatite

Bozkurt Y. , Sahin A., Sunulu A., Aydogdu M. O. , Altun E., Oktar F. N. , et al.

International Conference on Applied Nanotechnology and Nanoscience (ANNIC), Barcelona, İspanya, 9 - 11 Kasım 2016, cilt.829

Production of novel bioceramic ha biomaterials from natural sources

OKTAR F. N. , altun e., Aydogdu M. O. , Gokce H., GÜNDÜZ O.

Uluslararasi Katilimli 8. Ulusal Biyomekanik Kongresi, Türkiye, 19 - 23 Ekim 2016

Natural Hydroxyapatite Synthesis from Fish Bones Atlantic Bonito

GÜNDÜZ O. , KILIÇ O. , EKREN N. , Hasan G., KALKANDELEN C., OKTAR F. N.

Bioceramics 28, Charlote Noth Carolina, Amerika Birleşik Devletleri, 18 - 21 Ekim 2016

Physical Charecterization of Turbot Psetta Maxima Originated Natural Hydroxyapatite

İNAN A. T. , KÖMÜR B. H. , gökçe h., Ficai A., SALMAN S. , EKREN N. , et al.

APMAS 2016, 1 - 03 Haziran 2016

Mechanical and Microstructural properties of sintered enamel hydroxyapatite EHA commercial inert glass CIG composites

OKTAR F. N. , GÜNDÜZ O. , Gökçe H., KÖMÜR B. H. , YETMEZ M., Ficai A., et al.

6rh International Colloids Conference, 19 - 22 Haziran 2016

Production of nanobioceramics partciles from natural calctic sources Quenn scallop Aequipecten opercularis

GÜNDÜZ O. , OKTAR F. N. , özyeğin s., Gökçe H., BenNissan B.

6. International Colloids Conference, 19 - 22 Haziran 2016

Investigation of Electrospun Corn Starch

Çakmak M., Ömeroğlu A., Bayrak F., OKTAR F. N. , More Y. S. , SALMAN S. , et al.

12th International Nanoscience and Nanotechnology Conference, 3 - 05 Haziran 2016

Investigation of Electrospun Polyurethane and Bovine Derived Hydroxyapatite Nanocomposites

Sunulu A., Şahin A., Aydoğdu M. O. , OKTAR F. N. , YÜKSEK M. , GÜNDÜZ O.

12th International Nanoscience and Nanotechnology Conference, 3 - 05 Haziran 2016

Characterization of Cu Ag Eu Hydroxyapatite Composites by Using Wet chemical Precipitation

KÖMÜR B. H. , Öztürk R. E. , İNAN A. T. , GÜNDÜZ O. , Ecatarina A., Ficai A., et al.

6th International Advances in Applied Physics and Materiasls Science Congress & Exhibition (APMAS 2016), 1 - 03 Haziran 2016

Physical Characterization of Turbot Psetta Maxima Originated Natural Hydroxyapatite

İNAN A. T. , KÖMÜR B. H. , Gökçe H., Ficai A., SALMAN S. , EKREN N. , et al.

6th International Advances in Applied Physics and Materials Science Congress&Exhibition, 1 - 03 Haziran 2016

Characterization of Cu Ag Eu Hydroxyapatite Composite by Using Wet Chemical Precipitation

KÖMÜR B. H. , Öztürk R., İNAN A. T. , GÜNDÜZ O. , Andronescu E., Ficai A., et al.

6th International Advances in Applied Physics and Materials Science Congress&Exhibition, 1 - 03 Haziran 2016

Hydroxyapatite Synthesis from Fish Scale Atlantic Salmon Salmo Salar

KÖMÜR B. H. , Altun E., Aydogdu M. O. , Bilgiç D., Gökçe H., EKREN N. , et al.

6th International Advances in Applied Physics and Materials Science Congress & Exhibition, 1 - 03 Haziran 2016

Effects of Li2O Doping on Mechanical and Electrical Properties of Bovine Hydroxyapatite Composite BHA

DAĞLILAR S., Karagöz M., GÜNDÜZ O. , OKTAR F. N.

18th International Conference on Materials Engineering and Technology (international scholary and scientific research and innovation ), 4 - 05 Şubat 2016

A Novel Study The Mechanical Properties of Marine Sources Derived Hydroxyapatite HAp Polycarprolactone PCL Biocomposites

Altun E., Mehmet Onur A., GÜNDÜZ O. , OKTAR F. N. , SALMAN S.

1th Pharmacogenomics İstanbul Summıt, 27 - 28 Kasım 2015

A NOVEL STUDY THE MECHANICAL PROPERTIES OF MARINE SOURCES DERIVED HYDROXYAPATITE HAp POLYCAPROLACTONE PCL BIOCOMPOSITES

Altun E., Aydogdu O., GÜNDÜZ O. , OKTAR F. N. , ŞAHİN Y. M. , SALMAN S.

1st Pharmacogenomics Istanbul Summit, 27 - 28 Kasım 2015

The Mechanical Properties of Hydroxyapatite HAp Polycaproactone PCL Biocomposites

Keler M. K. , GÜNDÜZ O. , DAĞLILAR S., EKREN N. , OKTAR F. N.

Jahrestagung der Deutschen Gesellschaft für Biomaterialien 2015, 12 - 14 Kasım 2015

Mechanical properties of hydroxyapatite HAp Polycaprolactone PCL fibers biocomposites

Keler M., GÜNDÜZ O. , DAĞLILAR S., EKREN N. , OKTAR F. N.

Jahrestagung der Deutschen Gesellschaft für Biomaterialien, 12 - 14 Kasım 2015

Mechanical behaviour of PCL fibers

Memduh K., DAĞLILAR S., GÜNDÜZ O. , YÜKSEL M., ŞAHİN Y. M. , EKREN N. , et al.

27th symposium and Annual Meeting of the International society for ceramics in Medicine, 27 - 29 Ekim 2015

Novel bioceramicproduction via mechano chemical conversion from plate limpet shells

GÜNDÜZ O. , ŞAHİN Y. M. , EKREN N. , İNAN A. T. , SALMAN S. , chou j., et al.

27th symposium and Annual Meeting of the International Society for Ceramics in Medicine, 27 - 30 Ekim 2015

Mechanical Behavior of PCL Nano Fibers

keler k., OKTAR F. N. , EKREN N. , GÜNDÜZ O. , YÜKSEK M. , DAĞLILAR S., et al.

27 th Symposium and Annual Meeting, The International Society for Ceramics in Medicine, 27 - 29 Ekim 2015

Production of Apatite from Snail Shellsfor Biomedical Engineering Applications

GÜNDÜZ O. , ŞAHİN Y. M. , EKREN N. , İNAN A. T. , SALMAN S. , Chou J., et al.

27th Symposiıum and Annual Meeting The International Society for Ceramics in Medicine, 27 - 29 Ekim 2015

Can European Sea Bass Dicentrarchus labrax Scale Be a Good Candidate for Nano Bioceramics Production

ŞAHİN Y. M. , ficai A., GÜNDÜZ O. , EKREN N. , Tuna A., Gökçe H., et al.

27th symposium and Annual Meeting of the International society for ceramics in Medicine, 27 - 29 Ekim 2015

Novel Bioceramics Production via Mechano Chemical Conversion from Plate Limpet Shells

GÜNDÜZ O. , ŞAHİN Y. M. , EKREN N. , İNAN A. T. , SALMAN S. , Chou J., et al.

27th Symposiıum and Annual Meeting The International Society for Ceramics in Medicine, 27 - 29 Ekim 2015

Can European Sea Bass Dicentrarchus labrax Scale Bea Good Candıdate for Nano Bioceramics production

GÜNDÜZ O. , ŞAHİN Y. M. , EKREN N. , İNAN A. T. , SALMAN S. , Chou J., et al.

27th Symposiıum and Annual Meeting The International Society for Ceramics in Medicine, 27 - 29 Ekim 2015

Developments In Novel Biomaterials

OKTAR F. N. , GÜNDÜZ O. , ŞAHİN Y. M.

International Porous Powder Materials Symposium & Exhibition, 15 - 18 Eylül 2015

SILKFIBROIN CA P COMPOSITE BONE REPLACEMENT MATERIAL FOR GUIDED BONE GROWTH

başaran K., aksu n., Yüksel N., Sunar Y., Celebioğlu H., ŞAHİN Y. M. , et al.

20th International conference on Composite Materials, 19 - 24 Temmuz 2015

Bioceramic Production from Sea Urchins

AĞAOĞULLARI D., KEL D., GÖKÇE H., DUMAN İ., ÖVEÇOĞLU M. L. , AKARSUBAŞI A. T. , et al.

1st International Congress on Advances in Applied Physics and Materials Science (APMAS), 12 Mayıs 2011 - 15 Mayıs 2015

Nano Calcium Phosphate Powder Production Through Chemical Agitation from Atlantic Deer Cowrie Shells (Cypraea cervus Linnaeus)

Gunduz O. , Sahin Y. M. , Agathopoulos S., Agaogullari D., Gokce H., Kayali E. S. , et al.

25th Symposium and Annual Meeting of the International-Society-for-Ceramics-in-Medicine (ISCM), Bucharest, Romanya, 7 - 10 Kasım 2013, cilt.587, ss.80-81

Production and Mechanical Properties of Commercial Synthetic Hydroxyapatite (CSHA) Composites

DEMİRKOL N., OKTAR F. N. , Kayali E. S.

25th Symposium and Annual Meeting of the International-Society-for-Ceramics-in-Medicine (ISCM), Bucharest, Romanya, 7 - 10 Kasım 2013, cilt.587, ss.147-148

Effects of Commercial Inert Glass (CIG) Addition on Mechanical and Microstructural Properties of Chicken Hydroxyapatite (CHA)

DEMİRKOL N., ORAL A. Y. , OKTAR F. N. , Kayali E. S.

25th Symposium and Annual Meeting of the International-Society-for-Ceramics-in-Medicine (ISCM), Bucharest, Romanya, 7 - 10 Kasım 2013, cilt.587, ss.33-34

Tropical Sea Snail Shells: Possible Exotic Sources for Ceramic Biomaterial Synthesis

Oktar F. N. , Kiyici I. A. , Gokce H., Agaogullari D., Kayali E. S.

3rd International Congress on Advances in Applied Physics and Materials Science, Antalya, Türkiye, 24 - 28 Nisan 2013, cilt.1569, ss.269-274

Nano-Bioceramic Production via Mechano-Chemical Conversion (Ultrasonication)

Oktar F. N. , Agathopoulos S., Ozyegin L. S. , Turner I. G. , Gunduz O. , Demirkol N., et al.

24th Symposium and Annual Meeting of International Society for Ceramics in Medicine (ISCM 2012), Fukuoka, Japonya, 21 - 24 Ekim 2012, ss.609-610

Influence of Niobium Oxide on the Mechanical Properties of Hydroxyapatite

DEMİRKOL N., OKTAR F. N. , Kayali E. S.

24th Symposium and Annual Meeting of International Society for Ceramics in Medicine (ISCM 2012), Fukuoka, Japonya, 21 - 24 Ekim 2012, ss.29-30

Production of natural synthetic tricalcium and hydroxyapatite with an economic method

ÖZYEĞİN S., BİLĞİÇ ALKAYA D. , KEL D., OKTAR F. N. , PAZARLIOĞLU S., YETMEZ M.

2.ARGE Proje Pazarı, İstanbul, Türkiye, 01 Ocak 2012

Production of natural bioceramic from land snails

KEL D., GÖKÇE H., BİLĞİÇ ALKAYA D. , AĞAOĞULLARI D., DUMAN İ., ÖVEÇOĞLU M. L. , et al.

Symposium and Annual Meeting of International Society for Ceramics in Medicine, 6 - 09 Kasım 2011

Microstructure and mechanical properties of composites of Bovine Derived Hydroxyapatite BHA Doped with nano powder of Lantanium Oxide

PAZARLIOĞLU S. S. , ümit k., SALMAN S. , YETMEZ M., sevgi ö., YILMAZ S., et al.

XXXVIII Annual ESAO & Biennial IFAO Congress, 9 - 12 Ekim 2011

Microstructure and mechanical properties of sintered sheep enamel derived hydroxyapatite

nuriye a., ümit k., YETMEZ M., PAZARLIOĞLU S. S. , OKTAR F. N.

biyomalzeme, 9 - 12 Ekim 2011

Characterization of Porous Bovine Hydroxyapatite BHA Structures and Porous BHA Commercial Inert Glass CIG Composites

PAZARLIOĞLU S. S. , GÜLSOY H. Ö. , OKTAR F. N. , SALMAN S.

Biyomalzeme, 9 - 12 Ekim 2011

Composites of hydroxyapatite doped with nano powder of titanium oxide

Karacayli u., YETMEZ M., KAYALI E. S. , yeşilbek B., GÜNDÜZ O. , agathopoulos s., et al.

XXXVIII Congress of the European Society for Artificial Organs (ESAO 2011) and IV Biennial Congress of the International Federation on Artificial Organs (IFAO 2011), 3 - 05 Ekim 2011

Sintering effect on boron based Bioglass doped composites of bovine hydroxyapatite

Gunduz O. , Ahmad Z., Salman S., Inan A. T. , Ekren N. , Agathopoulos S., et al.

14th International Conference on Advances in Materials and Processing Technologies (AMPT), İstanbul, Türkiye, 13 - 16 Temmuz 2011, cilt.445, ss.982-983

Characterization of bovine dentine derived hydroxyapatite BDHA structures

nuriye a., OKTAR F. N. , ümit k., YETMEZ M., PAZARLIOĞLU S. S. , SALMAN S.

biyomalzeme, 2 - 04 Ocak 2011

Effect of Nano Lanthanium Oxide Dopin on Mechanical Properties of Natural Hydroxyapatite

PAZARLIOĞLU S. S. , SALMAN S. , sevgi ö., YILMAZ S., simeon a., OKTAR F. N.

MEMORİAS V CNGRESO İNTERNACİONAL DE BİOMATERİALS BIOMAT 2010, 27 Şubat - 01 Mart 2010

Effect of sintering temperature on mechanical properties and microstructure of zeolite (clinoptilolite) reinforced bovine hydroxyapatite (BHA) composites

Karacayli U., GÜNDÜZ O. , Salman S., Ozyegin L. S. , Agathopoulos S., Sengil A. Z. , et al.

1st International Conference on Biodental Engineering, Oporto, Portekiz, 26 - 27 Haziran 2009, ss.105-106

Influence of Boroxide Bioactive Bioglasses (BBB) on osteoblast viability

Valerio P., Goes A. M. , Karacayli U., GÜNDÜZ O. , SALMAN S. , Sengil A. Z. , et al.

1st International Conference on Biodental Engineering, Oporto, Portekiz, 26 - 27 Haziran 2009, ss.99-100

Effect of Sintering Temperature on Mechanical Properties and Microstructure of Sheep-bone Derived Hydroxyapatite (SHA)

Karacayli U., Gunduz O. , Salman S., Ozyegin L. S. , Agathopoulos S., Oktar F. N.

13th International Conference on Biomedical Engineering (ICBME), Singapore, Singapur, 3 - 06 Aralık 2008, cilt.23, ss.1271-1272

Bovine hydroxyapatite (BHA) Strontium Oxide Composites

Gunduz O. , Ozyegin L. S. , Dorozhkin S., Meydanoglu O., Eruslu N., Kayali S., et al.

21st International Symposium on Ceramics in Medicine, Buzios, Brezilya, 21 - 24 Ekim 2008, ss.407-410

Bovine hydroxyapatite (BHA) Boron Oxide Composites

Gunduz O. , Ozyegin L. S. , Dorozhkin S., Meydanoglu O., Eruslu N., Kayali S., et al.

21st International Symposium on Ceramics in Medicine, Buzios, Brezilya, 21 - 24 Ekim 2008, ss.403-406

New natural materials

Özyeğin L. S. , OKTAR F. N. , SALMAN S. , GÜNDÜZ O. , TOKSOY ÖNER E. , Tüyel U.

14th International Biomedical Science and Technology Symposium, 11 - 13 Mayıs 2008

Variations in the compression strength of cylindrical samples made of dense hydroxyapatite

Dorozhkin S., GÜNDÜZ O. , OKTAR F. N.

20th International Symposium on Ceramics in Medicine, Nantes, Fransa, 24 - 26 Ekim 2007, ss.103-104

Improvement of microstructure of bovine hydroxyapatite (BHA) with machineable fluorapatite glass (MFG)

Gunduz O. , Salman S., Kayali E. S. , Goller G., Goker I., Agathopoulos S., et al.

20th International Symposium on Ceramics in Medicine, Nantes, Fransa, 24 - 26 Ekim 2007, ss.495-496

The differences between the direct and sol-gel syntheses of silicon-contained calcium phosphates

Dorozhkin S., GÜNDÜZ O. , OKTAR F. N.

20th International Symposium on Ceramics in Medicine, Nantes, Fransa, 24 - 26 Ekim 2007, ss.107-108

The influence of bond-coating on plasma sprayed alumina-titania, doped with biologically derived hydroxyapatite, on stainless steel

Salman S., Cal B., Gunduz O. , Agathopoulos S., Oktar F. N.

3rd International Conference on Advanced Research in Virtual and Rapid Prototyping, Leiria, Portekiz, 24 - 29 Eylül 2007, ss.289-290

Sintering effect on mechanical properties of composites made of bovine hydroxyapatite (BHA) and commercial inert glass (CIG)

Salman S., Oktar F. N. , Gunduz O. , Agathopoulos S., Ovecoglu M. L. , Kayali E. S.

19th International Symposium on Ceramics in Medicine, Chengdu, Çin, 10 - 13 Ekim 2006, ss.189-190

Highly bioactive porous composite scaffolds of bovine hydroxyapatite (BHA-Ti, BHA-TiO2, BHA-Li2O)

Oktar F. N. , Agathopoulos S., Goller G., Gokce H., Kayali E. S. , Salman S.

19th International Symposium on Ceramics in Medicine, Chengdu, Çin, 10 - 13 Ekim 2006, ss.411-412

A simplified preparation method of silicon-substituted calcium phosphates according to green chemistry principles

Dorozhkin S. V. , Dorozhkina E. I. , Oktar F. N. , Salman S.

19th International Symposium on Ceramics in Medicine, Chengdu, Çin, 10 - 13 Ekim 2006, ss.55-56

Improvement of microstructure of bovine hydroxyapatite with yttria

Ozyegin L. S. , Salman S., Oktar F. N. , Agathopoulos S., Meydanoglu O., Akesi S., et al.

19th International Symposium on Ceramics in Medicine, Chengdu, Çin, 10 - 13 Ekim 2006, ss.47-48

Crystallization of a bone-like apatite from a milk-containing revised simulated body fluid (SBF)

Dorozhkin S. V. , Dorozhkina E. I. , Salman S., Oktar F. N.

19th International Symposium on Ceramics in Medicine, Chengdu, Çin, 10 - 13 Ekim 2006, ss.641-642

Hidroksiapatit Katkılı PMMA Kemik Çimentounun Mekanik Özellikleri

DAĞLILAR S., Erkan M. E. , GÜNDÜZ O. , Özyeğin S., OKTAR F. N. , SALMAN S.

I. Uluslararası Katılımlı Meslekî ve Teknik Eğitim Teknolojileri Kongresi, cilt III", bildiri kitapçığındaki, 11 - 13 Eylül 2005

Yayınlar & Eserler

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Diğer Dergilerde Yayınlanan Makaleler

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar