Prof. MUSTAFA CANER AKÜNER

Publication Network

Published journal articles indexed by SCI, SSCI, and AHCI

An Innovative Approach to Electrical Motor Geometry Generation using Machine Learning and Image Processing Techniques

DEMİR U., AKGÜN G., AKÜNER M. C., Pourkarimi M., AKGÜN Ö., Akıncı T. Ç.

IEEE Access , vol.11, pp.48651-48666, 2023 (SCI-Expanded) Sustainable Development

Feature Extraction and NN-based Enhanced Test Maneuver Deployment for 2 DoF Vehicle Simulator

DEMİR U., AKGÜN G., AKÜNER M. C., Demirci B., AKGÜN Ö., Akıncı T. Ç.

IEEE Access , vol.11, pp.36218-36232, 2023 (SCI-Expanded)

Design and analysis of radiaxial induction motor

Demir U., Aküner M. C.

Electrical Engineering , vol.100, no.4, pp.2361-2371, 2018 (SCI-Expanded)

Design and optimization of in-wheel asynchronous motor for electric vehicle

Demir U., Akuner M. C.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.33, no.4, pp.1517-1530, 2018 (SCI-Expanded)

Using taguchi method in defining critical rotor pole data of LSPMSM considering the power factor and efficiency Definiranje kritičnih podataka pola rotora LSPMSM-a s obzirom na faktor snage i učinkovitosti uporabomTaguchijeve metode

Demir U., Aküner M. C.

Tehnicki Vjesnik , vol.24, no.2, pp.347-353, 2017 (SCI-Expanded)

A new approach in application and design of toroidal axial-flux permanent magnet open-slotted NN type (TAFPMOS-NN) motor Novi pristup u primjeni i projektiranju NN tipa motora otvorenih utora s permanentnim magnetima prstenastog aksijalnog toka (TAFPMOS-NN)

Hüner E., Aküner M. C., Demir U.

Tehnicki Vjesnik , vol.22, no.5, pp.1193-1198, 2015 (SCI-Expanded)

Comparison of high efficiency and standard induction motors with different speed control methods

AKÜNER M. C., UZUN H., TEMİZ İ., HÜNER E.

Energy Education Science and Technology Part A Energy Science and Research. , vol.30, pp.533-538, 2012 (SCI-Expanded)

The effect of selection and use of technology education teaching methods and techniques

Akuner C., TEMİZ İ., Meral M.

ENERGY EDUCATION SCIENCE AND TECHNOLOGY PART B-SOCIAL AND EDUCATIONAL STUDIES , vol.4, no.4, pp.2217-2226, 2012 (SCI-Expanded)

Theoretical and experimental analysis of open-slotted axial-flux permanent magnet electrical machine

Akuner C., Huner E.

Energy Education Science and Technology Part A: Energy Science and Research , vol.29, no.2, pp.731-740, 2012 (SCI-Expanded)

Competencies of Teachers use of Technology in Learning and Teaching Prosses

MERAL M., AKÜNER M. C., TEMİZ İ.

Electronics and Electrical Engineering , vol.18, pp.93-97, 2012 (SCI-Expanded)

Axial Flux Synchronous Machines Compared with Different Stator Structures for Use in Working

Hüner E., Aküner M. C.

Przeglad Elektrotechniczny , vol.88, no.11, pp.174-177, 2012 (SCI-Expanded)

Competencies of Teachers use of Technology in Learning and Teaching Processes

Meral M., Aküner M. C., Temiz İ.

Elektronika Ir Elektrotechnika , vol.18, pp.93-97, 2012 (SCI-Expanded)

Competencies of Teachers' use of Technology in Learning and Teaching Processes

Meral M., Akuner C., Temiz I.

ELEKTRONIKA IR ELEKTROTECHNIKA , vol.18, no.10, pp.93-97, 2012 (SCI-Expanded)

Axial-Flux Synchronous Machines Compared with Different Stator Structures for Use in Working

Huner E., Akuner C.

PRZEGLAD ELEKTROTECHNICZNY , vol.88, 2012 (SCI-Expanded)

Analysis of Balanced Three-Phase Induction Motor Performance under Unbalanced Supply using Simulation and Experimental Results

TEMİZ İ., AKÜNER M. C., ÇALIK H.

ELEKTRONIKA IR ELEKTROTECHNIKA , no.3, pp.41-45, 2011 (SCI-Expanded)

Symmetrically broken rotor bars effect on the stator current of squirrel-cage induction motor

AKÜNER M. C., TEMİZ İ.

PRZEGLAD ELEKTROTECHNICZNY , vol.87, no.3, pp.313-314, 2011 (SCI-Expanded)

The Air Gap and Angle Optimization in the Axial Flux Permanent Magnet Motor

Aküner M. C., Hüner E.

ELEKTRONIKA IR ELEKTROTECHNIKA , no.4, pp.25-29, 2011 (SCI-Expanded)

Flexible Product Drying System Design and Application

Akuner C., Tuncay M. T.

ELEKTRONIKA IR ELEKTROTECHNIKA , no.10, pp.37-42, 2010 (SCI-Expanded)

Stator And Rotor Currents Analyses Of the Inverted Rotor Induction Motor

TEMİZ İ., BİRBİR Y., AKÜNER M. C.

ISTANBUL UNIVERSITY-JOURNAL OF ELECTRICAL AND ELECTRONICS ENGINEERING , vol.1, pp.929-934, 2009 (SCI-Expanded)

Stator and Rotor Voltages Analysis and Magnetic Flux Distribution of the Inverted Rotor Induction Motor

TEMİZ İ., AKÜNER M. C., BİRBİR Y.

. INTERNATIONAL JOURNAL of ENERGY and ENVIRONMENT, , vol.1, pp.188-194, 2007 (SCI-Expanded)

Articles Published in Other Journals

Developing a wearable device for upper extremity tremors

Yildiz S. D., AKGÜN G., GÜNAL D., Kaplanoglu E., AKÜNER M. C., ŞEHİRLİ Ü. S.

Marmara Medical Journal , vol.37, no.2, pp.157-165, 2024 (ESCI)

Multi System Level Driving Scenarious Based Topology Optimization of Bracket Design for 2 DoF Vehicle Simulator

Demirci B., demir u., AKGUN G., YILDIRIM A., Aküner C.

International Journal of Automotive Science and Technology , vol.7, no.3, pp.248-258, 2023 (Scopus)

An Intelligent Machine Condition Monitoring Model for Servo Systems

MUTLU H., AKÜNER M. C., AKGÜN G.

Balkan Journal of Electrical and Computer Engineering , vol.10, no.1, pp.23-29, 2022 (Peer-Reviewed Journal)

Quadrotor Test Düzeneği Tasarımı ve Uygulaması

Pehlivan K., Aküner M. C.

International Periodical of Recent Technologies in Applied Engineering , vol.2, no.1, pp.15-24, 2020 (Peer-Reviewed Journal)

Analyzing High Efficiency Asynchronous Motors Using Scalar Control Technique

Uzun H., Akar O., Demirci A., Aküner M. C., Terzi Ü. K.

Balkan Journal of Electrical and Computer Engineering , vol.6, pp.23-26, 2018 (Peer-Reviewed Journal)

Piezo Motor

AYGÜL E., AKÜNER M. C.

Otomasyon , 2018 (Non Peer-Reviewed Journal)

Analysis of In-Wheel Asynchronous Motor with Conical Geometry for Electric Vehicle

Demir U., Aküner M. C.

Journal of New Results in Science , vol.7, no.8, pp.29-37, 2018 (Peer-Reviewed Journal)

Analysis of In-Wheel Asynchronous Motor with Conical Geometry for Electric Vehicle

DEMİR U., AKÜNER M. C.

Journal of New Results in Science , vol.7, no.1, pp.29-37, 2018 (Peer-Reviewed Journal)

Analysis of In-Wheel Asynchronous Motor with Conical Geometry for Electric Vehicle

Demir U., Aküner M. C.

Journal of New Results in Science , vol.7, no.1, pp.29-37, 2018 (Peer-Reviewed Journal)

The Design and Magnetic Analysis of MultiDisc and Layer Winding Toroidal Axial Flux Permanent Magnet Open Slotted (MLTAFPMOS) Synchronous Alternator

Hüner E., Aküner M. C.

BALKAN JOURNAL OF ELECTRICAL COMPUTER ENGINEERING , vol.6, pp.1-5, 2018 (Peer-Reviewed Journal)

Calculation of Performance Characteristic of In-Wheel Asynchronous Motor for Electric Vehicle

Demir U., Aküner M. C.

Gaziosmanpasa Journal of Scientific Research , vol.6, pp.10-20, 2017 (Peer-Reviewed Journal)

Investigation on The effect of Airgap Distance for Ignition Coils Using Finite Element Methods

Demir U., Aküner M. C.

Journal of New Results in Science , vol.12, pp.18-28, 2016 (Peer-Reviewed Journal)

Investigation on the Output Signal of Rotational Speed Sensor for Different Flux Surfaces between Gear Wheel and Sensor

Demir U., Demir P., Aküner M. C.

Applied Mechanics and Materials , vol.850, pp.172-178, 2016 (Peer-Reviewed Journal)

Fan Hızı Ayarı ile Döner Tamburlu Kurutucuda Enerji Tasarrufu

TUNCAY M. T., AKÜNER M. C.

EEB 2016 , pp.354-356, 2016 (Non Peer-Reviewed Journal) Sustainable Development

Anahtarlamalı Relüktans Motorun Manyetik Analizi

AKÜNER M. C., DOĞAN Z.

3E Otomasyon , vol.230, pp.78-85, 2011 (Peer-Reviewed Journal)

Development of a Computer Assisted Control Strategy for Rotary Drum Dryer

TUNCAY M. T., AKÜNER M. C., TARHAN S.

International Burch University , 2010 (Non Peer-Reviewed Journal)

Stator and rotor currents analysis of the inverted rotor induction motor

TEMİZ İ., BİRBİR Y., AKÜNER M. C.

IU-Journal of Electrical Electronics Engineering , vol.9, pp.929-934, 2009 (Peer-Reviewed Journal)

ELECTROMAGNETIC COMPATIBILITY TEST PROCEDURES AND RADIATED EMISSION TEST SAMPLE

DURSUN E., AKÜNER M. C.

NWSA: Engineering Sciences , 2009 (Peer-Reviewed Journal)

Comparison of traditional education to computer aided education simulation of three phase rotating area in an induction machine

TEMİZ İ., AKÜNER M. C.

Procedia - Social and Behavioral Sciences , vol.1, pp.1825-1833, 2009 (Peer-Reviewed Journal)

Jeneratör Sistemlerinin Tanıtımı

TEMİZ İ., AKÜNER M. C., çalışkantürk h.

3e Electrotech , pp.220-223, 2007 (Peer-Reviewed Journal)

A New Control Method of Hybrid Step Motors For Educational and Industrial Applications Using Visual Basic 6 0

UYGUN D., AKÜNER M. C.

WSEAS Transactions on Computer Research , vol.1, no.2, pp.168-174, 2006 (Peer-Reviewed Journal)

A Study Of Different Air Gaps On The Effect Of Torque And Efficiency In Induction Machines

TEMİZ İ., AKÜNER M. C.

Wseas Transactions On Power Systems , pp.1955-1958, 2006 (Scopus)

Elektrik Eğitimi Simülasyon Program Uygulamaları

AKÜNER M. C., TEMİZ İ., KAKİLLİ A.

Uluslararası Eğitim Teknojileri Sempozyumu Ve Fuarı , 2005 (Peer-Reviewed Journal)

Amorphous Nüveli Transformatörlerde Enerji Tasarrufu Sağlanması

AKÜNER M. C., OĞUZ Y., TEMİZ İ.

3e Enerji Elektrik Elektronik , pp.86-90, 2001 (Peer-Reviewed Journal) Sustainable Development

Refereed Congress / Symposium Publications in Proceedings

Neural Network and IoT-based Test Maneuver Deployment for 2 DoF Vehicle Simulator

DEMİRCİ B., DEMİR U., AKGÜN G., YILDIRIM A., AKÜNER M. C., ÖZKAN M.

2022 International Conference on Artificial Intelligence of Things (ICAIoT), 29 December 2022, vol.11

Neural Network Approach for E-Motor Development

Pourkarimi M., Demir U., Aküner M. C.

2022 8th International Conference on Control, Decision and Information Technologies (CoDIT), İstanbul, Turkey, 17 May 2022, vol.1, pp.1091-1095

3 Boyutlu Yazıcı Desteği ile Nüvesiz Tip Alternatör Tasarımı

Aslan T., Aküner M. C.

Yenilikçi Teknolojiler Sempozyumu (ISITES2020), Bursa, Turkey, 23 - 25 October 2020, pp.650-657

Biosignal Classification and Disease Prediction with Deep Learning

Alan M., Aküner M. C., Kepez A.

Innovations in Intelligent Systems and Applications Conference, İstanbul, Turkey, 15 - 17 October 2020, no.1, pp.1-5

Correlation Between ECG and Heart Sound

Alan M., AKÜNER M. C., KAPLANOĞLU E., Kalen B.

IEEE SoutheastCon 2020, NC, United States Of America, 28 - 29 March 2020, no.1

BRUSHLESS DIRECT CURRENT MOTOR CONTROL METHODS AND APPLICATIONS

Alban Exauce M. M., Aküner M. C.

ÇUKUROVA3. ULUSLARARASI BİLİMSEL ARAŞTIRMALAR KONGRESİ, Adana, Turkey, 3 - 06 October 2019, vol.1, pp.271-290

Otonom robotlar için kablosuz sensör ağı uygulaması

Aküner M. C.

30 Ağustos Bilimsel Araştırmalar Sempozyumu, İzmir, Turkey, 28 - 31 August 2019, pp.335-338

Comparison between two conical induction machines designed for an electric vehicle application

Demir U., Roggia S., Aküner M. C.

11th IEEE International Electric Machines and Drives Conference, IEMDC 2019, California, United States Of America, 12 - 15 May 2019, pp.1032-1037

DİZEL MOTOR ELEKTRONİK KONTROL ÜNİTESİ GELİŞTİRİLMESİ İÇİN DONANIM SİMÜLATÖRÜ TASARLANMASI VE MOTOR TEST VERİLERİ İLE DONANIM SİMÜLATÖRÜNDEN ELDE EDİLEN VERİLERİNİN KARŞILAŞTIRILMASI

Şekerbey M., Gökaşan M., Aküner M. C., Şehirlioğlu M., İkizoğlu S.

4. Mühendislik Mimarlık ve Tasarım, İstanbul, Turkey, 9 - 10 April 2019, pp.185-194

Binalarda Enerji Performansı Uzmanlığı Avrupa Sertifikası Uygulaması ve Sonuçları - Energy Performance Expertise in Buildings European Certification Application and Results

AKÜNER M. C., AKSU B., ŞAHİN E., BEKAROĞLU A.

UMYOS 18, 16 - 18 October 2018, vol.1, pp.337-342

6-12 Yaş Gruplarında Robotik Araç Ve Gereçleri Kullanarak Kodlama Öğretiminin Uygulaması Ve Analizi- Application And Analysis Of Coding Teaching Using Robotics Tools And Materials From 6-12 Age Groups

Şahin E., Aküner M. C.

UMYOS 18, Baku, Azerbaijan, 16 - 18 October 2018, vol.1, pp.217-224

Akıllı Tahta Kullanımında Öğretmen Hazır Bulunuşluk Değerlendirilmesi

MERAL M., AKÜNER M. C., KESEN U.

UMYOS 18, 16 - 18 October 2018, vol.1, pp.202-209

Meslek Yüksekokulu Elektronik Ve Otomasyon Bölümü Programlarındaki Öğrencilerinin Mezun Oldukları Lise Alanına Göre Görüş Farklılıklarının Değerlendirilmesi,

KESEN U., AKÜNER M. C., MERAL M.

UMYOS 18, 16 - 18 October 2018, vol.1, pp.201-216

Binalarda Enerji Performansı Uzmanlığı Avrupa Sertifikasının Oluşturulması- Establishment of European Certificate of Energy Performance Expertise in Buildings

AKSU B., AKÜNER M. C., BEKAROĞLU A., ŞAHİN E.

UMYOS 18, 16 - 18 October 2018, vol.1, pp.409-419

Şebekeye Bağlı Fotovoltaik Enerji Sistemlerinde Performans Analizinin Yapılması:Doğu Anadolu Bölgesi Malatya İli Örneği

KILIÇ U., KESEN U., AKÜNER M. C.

International Congress of Energy Economy and Securıty, İstanbul, Turkey, 21 - 22 April 2018, vol.1, pp.71 Sustainable Development

A New Approach for In-Wheel Asynchronous Motor of Electric Vehicle

Demir U., AKÜNER M. C.

1st International Symposium on Multidisciplinary Studies and Innovative Technologies, 2 - 04 November 2017, vol.1

A New Approach for In-Wheel Asynchronous Motor of Electric Vehicle”

DEMİR U., AKÜNER M. C.

ISMSIT2017-1st International Symposium on Multidisciplinary Studies and Innovative Technologies, Tokat, Turkey, 2 - 04 November 2017

Design and Investigation of In-Wheel Asynchronous Motor with Conical Geometry for Electric Vehicle

DEMİR U., AKÜNER M. C.

1st International Symposium on Multidisciplinary Studies and Innovative Technologies, 2 - 04 November 2017, vol.1

An application for industrial quality control with machine vision

Yiğit E., AKÜNER M. C.

8th International Advanced Technologies Symposium (IATS’17), 19 - 22 October 2017, vol.1

Investigation and Improvement of In-Wheel Asynchronous Motor for an Electrical Vehicle Considering Geometric Dimensioning

Demir U., AKÜNER M. C.

8th International Advanced Technologies Symposium (IATS’17), 19 - 22 October 2017, vol.1

Yapay Sinir Ağları İle Piezo Motor İçin Kontrolör Tasarımı

Aygül E., Aküner M. C.

INES 2017 II. International Academic Research Congress, Antalya, Turkey, 18 - 21 October 2017, vol.1

Investigation and Improvement of InWheel Asynchronous Motor for An Electrical Vehicle Considering Geometric Dimensioning

DEMİR U., AKÜNER M. C.

IATS2017-8th International Advanced Technology Symposium, Elazığ, Turkey, 19 - 22 October 2017

Investigation of Driving Method Via 2 Phases for Travelling Wave Ultrasonic Motor

TAŞ H., AKÜNER M. C., DEMİR U.

8th International Advanced Technologies Symposium (IATS’17), 19 - 22 October 2017, vol.1

Investigation of the immunity to voltage over stress requirement for the electrical seat latch actuator

Demir U., Aküner M. C.

4th International Conference on Electrical and Electronics Engineering, ICEEE 2017, Ankara, Turkey, 8 - 10 April 2017, pp.187-193 Sustainable Development

Actuator design and analysis for mechatronics systems

Er M., AKÜNER M. C.

2016 ICBTS International Research Conference, Berlin, Germany, 20 - 22 October 2016, vol.1, pp.7-11

Otomotiv Ateşleme Bobinlerinde Hava Aralığı Değişiminin Ateşleme Performansına Etkisinin Sonlu Elemanlar Analizi ile İncelenmesi

DEMİR U., AKÜNER M. C.

EEB2016-Elektrik-Elektronik ve Bilgisayar Sempozyumu, Tokat, Turkey, 11 - 13 May 2016

Fan Hızı Ayarı ile Döner Tamburlu Kurutucuda Enerji Tasarrufu

TUNCAY M. T., AKÜNER M. C.

EEB 2016 Elektrik Elektronik ve Bilgisayar Sempozyumu, Turkey, 11 - 13 May 2016, vol.1 Sustainable Development

Manyetik Motor Prototip Tasarım ve Analizi

DEMİR U., AKKUŞ N., AKÜNER M. C.

Otomatik Kontrol Ulusal Toplantısı. Malatya, Turkey, 26 - 28 September 2013

Eksenel Akılı Sabit Mıknatıslı Motorların Elektrikli Araçlardaki Kullanımına İlişkin Bir İnceleme

HÜNER E., AKÜNER M. C.

4. Ulusal Mekatronik Mühendisliği Öğrenci Kongresi, Turkey, 8 - 09 June 2013

Tarımsal Ürün Kurutucularında Kontrol Mühendisliği Uygulamaları

TUNCAY M. T., TARHAN S., AKÜNER M. C.

1st International 5th National Vocational Schools Symposium\’xx09. Konya, 2 - 04 November 2009

Comparison of Traditional Education to Computer Aided Education Simulation of Three Phase Rotating Area in an Induction Machine

TEMİZ İ., AKÜNER M. C.

World Conference On Educational Sciences. Lefkoşa, Kuzey Kıbrıs, 2 - 04 October 2009

Eksenel Akılı Motorlarda Uygulanan Kontrol Yöntemlerine İlişkin Bir İnceleme

HÜNER E., AKÜNER M. C.

5. Uluslarası İleri Teknolojiler Sempozyumu. Karabük, 1 - 03 September 2009

Comparison of traditional education to computer aided education: simulation of three-phase rotating area in an induction machine

TEMİZ İ., Akuner C.

World Conference on Educational Sciences, Nicosia, CYPRUS, 4 - 07 February 2009, vol.1, pp.1825-1833

A New Construction of Switched Reluctance Motor Improving Magnetic Field Energy and Torque Production

UYGUN D., AKÜNER M. C., Müstecep Y.

6th WSEAS International Conference on APPLICATIONS of ELECTRICAL ENGINEERING (AEE 07), 26 - 28 June 2007

A new construction of switched reluctance motor improving magnetic field energy and torque production

Uygun D., Akuener C., Yumurtaci M.

6th WSEAS International Conference on Applications of Electrical Engineering, İstanbul, Turkey, 27 - 29 May 2007, pp.178-179

Effects of different rotor and stator constructions on the performance of switched reluctance motors

Akuner C., Uygun D.

6th WSEAS International Conference on Applications of Electrical Engineering, İstanbul, Turkey, 27 - 29 May 2007, pp.183-184

Rotating field voltage analysis on the stator and rotor of the inverted rotor induction motor

TEMİZ İ., Akuner C., BİRBİR Y., KAKİLLİ A.

6th WSEAS International Conference on Applications of Electrical Engineering, İstanbul, Turkey, 27 - 29 May 2007, pp.172-173

Effects of different rotor and stator constructions on the performanceof switched reluctance motors

AKÜNER M. C., UYGUN D.

AEE ’xx07: Proceedings of the 6th WSEAS International Conference onApplications of Electrical Engineering, 1 - 03 June 2007, pp.183-188

A pc based digital storage oscilloscope DSO design with a sound card

AKÜNER M. C., BİRBİR Y., TEMİZ İ.

International Conference on MODELING AND SIMULATION General Application Embedded Systems Engineering AMSE’06, 1 - 03 June 2006

Bulanık Mantık Yöntemiyle Asenkron Motorun Stator Akımının Simülasyonu

TEMİZ İ., AKÜNER M. C., BİRBİR Y.

GAP V. Mühendislik Kongresi. Şanlıurfa, Türkiye, Turkey, 1 - 03 June 2006

A Study Of Different Air Gaps On The Effect Of Torque And Efficiency In Induction Machines.

AKÜNER M. C., TEMİZ İ.

Wseas Transactions On Power Systems, 18 - 21 May 2006

A Study on Magnetizing Inrush Current of Different Core Materials

Özgönenel O., Aküner M. C.

ELECO’2005, Fourth International Conference On Electrical and Electronics Engineering. Bursa, Türkiye, Antalya, Turkey, 1 - 03 June 2005

Meslek Derslerinde Farklı Öğretim Metotlarının Öğrenci Başarısına Etkisi

AKÜNER M. C., KIRKSEKİZ O.

V.Uluslararası Eğitim Teknolojileri Sempozyumu. Sakarya, Türkiye, 1 - 03 May 2005

Transformatör Kaçak Akı dağılımının Simülasyonu ve Eğitim Amaçlı Kullanımı

AKÜNER M. C., NOĞAY H. S.

1. Uluslararası Mesleki ve Teknik Eğitim Teknolojileri Kongresi. Istanbul, Türkiye, Turkey, 1 - 03 April 2005 Sustainable Development

Teknik Eğitim Fakültelerinde Laboratuvar Derslerinde Kullanılmak üzere bir E Kütüphane Oluşturulması ve Hazırlanmış bir Tasarım Örneği

Aküner M. C., Kanburoğlu V.

1. Uluslararası Mesleki ve Teknik Eğitim Teknolojileri Kongresi, İstanbul, Turkey, 5 - 07 September 2005, vol.1, no.1, pp.525-532

Books & Book Chapters

Malzeme Bilgisi: İmalat Yöntem ve Teknolojileri

YAVUZ H., AKKUŞ N., KIRAL Z., AKÜNER M. C., ORAL M., ÖZKURT A., et al.

in: Mekatroniik Mühendisliğine Giriş, Hakan Yavuz, Editor, Papatya Yayıncılık, İstanbul, pp.191-224, 2018

Yüksek Verimli ve Standart Asenkron Motorlarda Hız Kontrol Yöntemleri

UZUN H., AKÜNER M. C.

Türkiye Alim Kitapları, Berlin, 2016

Metrics

Publication

113

Citation (WoS)

H-Index (WoS)

Citation (Scopus)

101

H-Index (Scopus)

H-Index (Scholar)

Citiation (TrDizin)

H-Index (TrDizin)

Citiation (Sum Other)

Project

Intellectual Property

Thesis Advisory

Open Access

UN Sustainable Development Goals

Publications & Works

Publication

Citation (WoS)

H-Index (WoS)

Citation (Scopus)

H-Index (Scopus)

H-Index (Scholar)

Citiation (TrDizin)

H-Index (TrDizin)

Citiation (Sum Other)

Project

Intellectual Property

Thesis Advisory

Open Access