Prof. Dr. SEZGİN ERSOY

DIGEST JOURNAL OF NANOMATERIALS AND BIOSTRUCTURES , cilt.12, sa.4, ss.1149-1155, 2017 (SCI-Expanded)

FRICTION AND WEAR PERFORMANCE OF HIGH DENSITY POLYETHYLENE/STYRENE - BUTADIENE RUBBER POLYMER BLENDS

REVISTA ROMANA DE MATERIALE-ROMANIAN JOURNAL OF MATERIALS , cilt.45, sa.3, ss.267-271, 2015 (SCI-Expanded)

MECHANICAL, MORPHOLOGICAL AND THERMAL PROPERTIES OF HDPE POLYMER COMPOSITES FILLED WITH TALC, CALCIUM CARBONATE AND GLASS SPHERES

REVISTA ROMANA DE MATERIALE-ROMANIAN JOURNAL OF MATERIALS , cilt.45, sa.2, ss.147-154, 2015 (SCI-Expanded)

FRICTION AND WEAR PERFORMANCE OF HDPE/TALC- CALCIUM CARBONATE POLYMER COMPOSITES AGAINST SLIDING DISTANCE AND APPLIED LOAD

REVISTA ROMANA DE MATERIALE-ROMANIAN JOURNAL OF MATERIALS , cilt.44, ss.257-264, 2014 (SCI-Expanded)

Investigation on The High Density Polyetylen Synthetic Rubber Tyrene Butadiene Composites

Metalurgia International , cilt.18, sa.9, ss.5-9, 2013 (SCI-Expanded)

Thermal and Mechanical Properties of Walnut Shell and Glass Fiber Reinforced Thermoset Polyester Composites

Onat A., Pazarlıoğlu S. S., Sancak E., Ersoy S., Beyit A., Erdem R.

ASIAN JOURNAL OF CHEMISTRY , cilt.25, ss.1947-1952, 2013 (SCI-Expanded)

THE MECHANICAL AND MORPHOLOGICAL PROPERTIES OF HDPE COMPOSITES FILLED WITH SiO2, ZnO, Mg(OH)(2) and CaCO3 NANO POWDER

Ersoy S., Karatepe Mumcu Y.

REVISTA ROMANA DE MATERIALE-ROMANIAN JOURNAL OF MATERIALS , cilt.43, sa.4, ss.417-424, 2013 (SCI-Expanded)

Usage level of educational technologies of students at electronic computer department in technical high school

ENERGY EDUCATION SCIENCE AND TECHNOLOGY PART A-ENERGY SCIENCE AND RESEARCH , cilt.30, sa.1, ss.137-142, 2012 (SCI-Expanded)

Investigation of Sound Absorption and Impedance Ratio of SBR/HIPS Polymer Blends

Ulug E., Taşdemir M., Ersoy S.

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING , cilt.51, sa.2, ss.170-174, 2012 (SCI-Expanded)

Effects of HIPS on the Sound Absorption and Impedance Ratio of SEBS/HIPS/CaCO3 Polymer Composites

Taşdemir M., Ersoy S., Ulug E.

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING , cilt.51, sa.9, ss.952-956, 2012 (SCI-Expanded)

Sound Adsorption and Morphological Properties of SIS/HIPS/CaCO3 Polymer Composites

Ersoy S., Ulug E., Taşdemir M.

JOURNAL OF POLYMER MATERIALS , cilt.28, ss.551-560, 2011 (SCI-Expanded)

Measurements of noise at crossroads and on transportations its effects and possible measures to take

ERSOY S., KARATEPE MUMCU Y.

Journal Of Vibroengineering , cilt.13, ss.109-119, 2011 (SCI-Expanded)

Measurements of noise at crossroads and on transportations, its effects and possible measures to take

ERSOY S., Karatepe Y.

JOURNAL OF VIBROENGINEERING , cilt.13, sa.1, ss.109-119, 2011 (SCI-Expanded)

The Active Learning Method of the Automotive Mechatronics Course Learning Impact on Stability

ERSOY S., TOPTAŞ E.

TECHNICS TECHNOLOGIES EDUCATION MANAGEMENT-TTEM , cilt.6, sa.1, ss.203-210, 2011 (SCI-Expanded)

Determination of views about usage level of education technologies of teachers at electronic and computer department of technical high school

KARATEPE MUMCU Y., ERSOY S., VARBAK NEŞE S.

Technics Technologies Education Management-Ttem , 2011 (SCI-Expanded)

An Investigation of Mechanical and Acoustic Absorption Properties of Multi axial Glass Fiber And Hazelnut s Shell Reinforced Polyester Resin Composites

Ersoy S., Beyit A., Sancak E.

Journal Of Vibroengineering , cilt.11, ss.305-316, 2009 (SCI-Expanded)

An investigation of mechanical and acoustic absorption properties of multiaxial glass fiber and hazelnut's shell reinforced poliester resin composites

Ersoy S., Beyit A., Sancak E.

Journal of Vibroengineering , cilt.11, ss.305-315, 2009 (SCI-Expanded)

Online modelling for sound absorption properties of composite material

Ersoy S., Kaplanoğlu E.

JOURNAL OF VIBROENGINEERING , cilt.11, ss.298-304, 2009 (SCI-Expanded)

Investigation of industrial tea-leaf-fibre waste material for its sound absorption properties

Ersoy S., Küçük H.

APPLIED ACOUSTICS , cilt.70, ss.215-220, 2009 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Purification of olive mill waste: a circular economy model for the Mediterranean region

Feyzioğlu A., Ersoy S., Omoruyı T. U., Santoro D., Pıccınettı L.

Insights into Regional Development , cilt.6, ss.92-106, 2024 (Scopus) Sürdürülebilir Kalkınma

Reading Gokturkish text with the Yolo object detection algorithm

Karakaya M., Ersoy S., Feyzioğlu A., Ersoy S.

, cilt.4, sa.2, ss.9-16, 2024 (Hakemli Dergi) Sürdürülebilir Kalkınma

Material selection in sensor design for additive manufacturing

AKTAŞ B., ŞAHİN T., GÜLLÜ A., TOPTAŞ E., FEYZİOĞLU A., ERSOY S.

JVE International Ltd. , cilt.4, 2023 (Hakemli Dergi)

Air leakage test system for product without atmosphere air connection

Temiz I., Feyzioğlu A., Çelebi M. F., Ersoy S.

Journal of Mechatronics and Artificial Intelligence in Engineering , cilt.4, sa.2, ss.40-46, 2023 (Hakemli Dergi)

Bioluminescence sensor: enzymes, reaction and utilization as an energy source

Yağdıran B., Ersoy S., Gültekin B. N., Yağdıran M.

Journal of Mechatronics and Artificial Intelligence in Engineering , cilt.3, sa.2, 2022 (Hakemli Dergi)

Productivity forecast with digital greenhouse automation system for sustainable agriculture

Gök A. E., Çelebi M. F., Koca A. S., Doğan M., Ersoy S.

Journal of Mechatronics and Artificial Intelligence in Engineering , cilt.3, sa.1, ss.40-46, 2022 (Hakemli Dergi)

Manufacturing of complex geometric structure metal matrix structures used for special purposes

Kaba M., Ersoy S., Ekinli B.

Journal of Mechatronics and Artificial Intelligence in Engineering , cilt.2, sa.2, ss.11-17, 2021 (Hakemli Dergi)

Launchable rotary wing UAV designs and launch mechanism designs for rotary wing UAV

Gökbel E., ERSOY S.

Journal of Mechatronics and Artificial Intelligence in Engineering , cilt.2, sa.2, ss.1-12, 2021 (Hakemli Dergi)

Analysis of the vehicle: applying finite element method of 3D data

ÖZCAN F., ERSOY S.

Mathematical Models in Engineering , cilt.7, sa.4, ss.1-7, 2021 (Hakemli Dergi)

Analysis of electroencephalography (EEG) signals and adapting to systems theory principles

Camgöz A. N., Ekşi Z., Çelebi M. F., Ersoy S.

JOURNAL OF COMPLEXITY IN HEALTH SCIENCES , cilt.4, sa.2, ss.1-6, 2021 (Hakemli Dergi)

Measurement of temperature and displacement with NiTi actuators under certain electrical conditions

Toptaş E., Çelebi M. F., Ersoy S.

JOURNAL OF MEASUREMENTS IN ENGINEERING , cilt.9, sa.2, ss.87-94, 2021 (ESCI)

Automatic Decision Making System with Environmental and Traffic Data

Ersoy S., Waqar T., Toptaş E.

Mathematical Models in Engineering , cilt.7, sa.2, 2021 (Hakemli Dergi)

Microfluidics chip design analysis and control

ÜNALLI İ., ERSOY S., ERTUĞRUL İ.

Journal of Mechatronics and Artificial Intelligence in Engineering , cilt.1, sa.1, ss.2-7, 2020 (Hakemli Dergi)

Development of vehicle tracking system with low-cost wireless method

Ülkir O., Akın M., Ersoy S.

Journal of Mechatronics and Artificial Intelligence in Engineering , cilt.1, sa.1, ss.8-13, 2020 (Hakemli Dergi)

Electronic and Mechanical Design of a Hexapod Land Searching Robot

Boz T., Aras İ., Kıkıcı S., Ersoy S.

International Advanced Researches and Engineering Journal , cilt.4, sa.1, ss.34-40, 2020 (Hakemli Dergi)

Starch Synthesis from Air Pollution Formation with a Converter System

Çalı S., Ersoy S.

Ulusal Çevre Bilimleri Araştırma Dergisi , cilt.3, sa.1, ss.11-19, 2020 (Hakemli Dergi)

DETERMINING UNMANNED AERIAL VEHICLE DESIGNPARAMETERS FOR AIR POLLUTION DETECTION SYSTEM

Taş M. E., Ersoy S.

The Online Journal of Science and Technology , cilt.10, sa.1, ss.6-18, 2020 (Hakemli Dergi)

Determining Unmanned Aerial Vehicle Desing Parameters for Air Pollution Detection System

Ersoy S., Taş M. E.

The Online Journal of Science and Technology , cilt.10, sa.1, ss.6-18, 2020 (Hakemli Dergi)

Product Development by Additive Manufacturing and 3D Printer Technology in Aerospace Industry

Kalender M., Bozkurt Y., Ersoy S., Salman S.

Havacılık ve Uzay Teknolojileri Dergisi , cilt.13, sa.1, ss.129-138, 2020 (Hakemli Dergi)

Product Development with Additive Manufacturing and 3D Printer Technology in Aerospace Industry

Kalender M., Bozkurt Y., Ersoy S., Salman S.

Journal of Aeronautics and Space Technologies , cilt.13, sa.1, ss.129-138, 2020 (Hakemli Dergi)

Havacılık ve Uzay Endüstrisinde Katmanlı İmalat ve 3B Yazıcı Teknolojisi ile Ürün Geliştirme

KALENDER M., BOZKURT Y., ERSOY S., SALMAN S.

Havacılık ve Uzay Teknolojileri Dergisi , cilt.13, sa.1, ss.129-138, 2020 (Hakemli Dergi)

Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi

Ülkir O., Ertuğrul İ., Ersoy S., Girgin B. C.

Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.2, sa.1, ss.74-78, 2019 (Hakemli Dergi)

THE DESIGN AND IMPLEMENTATION OF A MEDICAL INJECTIONSYSTEM PROVIDING SENSITIVE FLUID FLOW CONTROL USINGMECHATRONICS DESIGN METHOD

Ersoy S., Yılmaz Ö.

ACTA TECHNICA NAPOCENSIS SERIES-APPLIED MATHEMATICS MECHANICS AND ENGINEERING , cilt.64, sa.4, ss.551-556, 2019 (ESCI)

Sanayi Üretimde Elektrikle İlgili Yaşanan İş Kazalarının Belirlenmesi ve Çözüm Önerileri

Kılıçaslan C., Ersoy S.

AKU J.Eng.App.Sci. , cilt.2, ss.85-101, 2019 (Hakemli Dergi)

INVESTIGATION ON VIBRATION ANALYSIS OF THE EFFECT OFFIBER BREAKS IN UNIDIRECTIONAL COMPOSITES

Toptaş E., Ersoy S., Bozkurt Y.

The Online Journal of Science and Technology , cilt.8, ss.74-79, 2018 (Hakemli Dergi)

COMPARISON OF THE VIBRATION PROPERTIES OF MATERIALS AA2124/SiC/25p and ALUMINUM 6061-T6

Bozkurt Y., Toptaş E., Ersoy S.

The Online Journal of Science and Technology , cilt.8, ss.44-47, 2018 (Hakemli Dergi)

MATERIAL SELECTION IN DETERMINATION OF POSITION AND SIZE FOR ARTIFICIAL ORGANS

ERSOY S., ERTUĞRUL İ., ÜLKİR O., TEMİZ İ.

Journal of the Technical University of Gabrovo , cilt.56, ss.53-56, 2018 (Hakemli Dergi) Sürdürülebilir Kalkınma

The Methods Used in the Automotive Production: Hemming Operations Planning

ERSOY S., ERTUĞRUL İ., AYGÜL E.

Engineering and Applied Science , cilt.1, sa.1, ss.103-106, 2018 (Hakemli Dergi)

DESIGN AND CONTROL OF PLASTIC BOTTLE BREAKING AND STORAGE MACHINE

ERSOY S., AYGÜL E., TOPTAŞ E.

Journal of the Technical University of Gabrovo , cilt.56, ss.30-32, 2018 (Hakemli Dergi)

Measurement of Noise Level: Applied Fair Area

ERSOY S., AYGÜL E., ERTUĞRUL İ.

Applied Technologies and Innovations , cilt.13, sa.2, ss.15-18, 2017 (Hakemli Dergi)

Wear performance of HDPE/ZnO-SiO2-CaCO3–Mg(OH) nano filler polymer composites

Ersoy S., Taşdemir M.

The Online Journal of Science and Technology , cilt.7, sa.2, ss.111-115, 2017 (Düzenli olarak gerçekleştirilen hakemli kongrenin bildiri kitabı) Sürdürülebilir Kalkınma

Measurement of noise level in the fair area

Ersoy S., Ertuğrul İ., Aygül E.

Applied Technologies and Innovations , cilt.13, sa.1, ss.21-25, 2017 (Hakemli Dergi) Sürdürülebilir Kalkınma

FRICTION AND WEAR PERFORMANCE OF HIGH DENSITY POLYETHYLENE STYRENE BUTADIENE RUBBER POLYMER BLENDS

The Online Journal of Science and Technology , cilt.6, ss.57-60, 2016 (Hakemli Dergi)

Vortex with the Formation of Electricity Generation and System Modelling

Ertuğrul İ., Ersoy S., Ragulskis M.

International Journal of Environmental Science and Development , cilt.5, sa.2, ss.152-154, 2014 (Scopus)

Zinc oxide (ZnO), magnesium hydroxide [Mg(OH)2] and calcium carbonate (CaCO3) filled HDPE polymer composites: Mechanical, thermal and morphological properties

Ersoy S., Taşdemir M.

Marmara Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.24, sa.4, ss.93-104, 2012 (Hakemli Dergi) Sürdürülebilir Kalkınma

Mechanical properties of bi axial glass fiber and pistachio shell reinforced polyester composites

Pazarlıoğlu S. S., Beyit A., Ersoy S., Sancak E., Küpeli G., Salman S.

Usak University Journal of Material Sciences , cilt.1, ss.9-14, 2012 (Hakemli Dergi)

Hastane Infüzyon Cihazları Otomasyonu

ERSOY S., TOPTAŞ E.

Bilişim Teknolojileri Dergisi , cilt.4, ss.1-5, 2011 (Hakemli Dergi)

The effect of a new teaching methodology on learning performances of automotive mechatronics students

ERSOY S., KÜÇÜK H.

Procedia-Social and Behavioral Sciences , cilt.2, sa.2, ss.310-316, 2010 (Hakemli Dergi)

Electrical measurements and analyses with data acquisition devices (DAS) of heating and cooling capacities of the intercity coaches

Yilmaz Ö., Erçetin R., Akıncı T., Ersoy S.

Solid State Phenomena , ss.651-656, 2009 (Scopus)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Computational model for the nonlinear dynamic response of MEMS-based micromirror

58th International JVE Conference, Ventspils, Letonya, 25 - 26 Ağustos 2022, cilt.44, sa.22851, ss.149-155

Reading and playing musical notes with image processing techniques with mobile application

Ersoy S., Özdöşemeci F.

58th International JVE Conference, Ventspils, Letonya, 25 - 26 Ağustos 2022, cilt.44, sa.22589, ss.111-116

Vibration analysis of screw-fed systems used in additive manufacturing technology

Ersoy S., Kaba M., Ekinli B.

57th International JVE Conference, İstanbul, Türkiye, 13 - 15 Haziran 2022, cilt.43, ss.109-112

DETERMINING UNMANNED AERIAL VEHICLE DESIGNPARAMETERS FOR AIR POLLUTION DETECTION SYSTEM

MEHMET ERDEM T., ERSOY S.

INTERNATIONAL SCIENCEANDTECHNOLOGYCONFERENCE, Prag, Çek Cumhuriyeti, 3 - 05 Temmuz 2019, ss.46-60

Arazide Arama Ve Tespit Robotu Tasarımı

Aras İ., KILICI S., ERSOY S.

The International Aluminium-Themed Engineering and Natural Sciences Conference, Konya, Türkiye, 4 - 06 Ekim 2019, cilt.1, ss.274-278

Direction-Action Research for Design, Analysis, and Fabrication of Temperature Sensor Using Microstreolitography Technique

Waqar T., ERSOY S.

The International Aluminium-Themed Engineering and Natural Sciences Conference, Konya, Türkiye, 4 - 06 Ekim 2019, cilt.1, ss.268-273

Additive Manufacturing and 3D Printer Technology in Aerospace Industry

Kalender M., Kılıç S. E., Ersoy S., Bozkurt Y., Salman S.

9th International Conference on Recent Advances in Space Technologies, İstanbul, Türkiye, 11 - 14 Haziran 2019, cilt.9, sa.1, ss.689-695

TÜRKİYE’DE ELEKTRİK MAKİNELERİ BAKIMLARINDA YAŞANAN İŞ KAZALARI, SORUNLAR VE ÇÖZÜMLER

BALCI H., KALENDER M., KILIÇ S. E., BOZKURT Y., ERSOY S.

MIDDLE EAST INTERNATIONAL CONFERENCEON MULTIDISCIPLINARY STUDIES, BEYRUT, Lübnan, 9 - 12 Mayıs 2019, cilt.1, ss.144-168

EVALUATION OF STUDENT OPINIONS ON WELDING TECHNOLOGY TRAINING

Kalender M., Kılıç S. E., Bozkurt Y., Ersoy S.

IV. ULUSLARARASI MESLEKİ VE TEKNİK BİLİMLER KONGRESİ, Erzurum, Türkiye, 7 - 09 Aralık 2018, cilt.2, ss.1154-1175

Determination of Traffic Behaviours of Vehicle with Image Processing

ERSOY S., Zortul M. S. F.

3rd International Congress on Multidisciplinary Studies, Kiev, Ukrayna, 5 - 06 Ekim 2018, cilt.3, ss.125-140

Smart House Systems Administrated by Brain-Dierctions

ERSOY S., İLHAN B., ÖNDER B., KALENDER M. E.

3rd International Congress on Multidisciplinary Studies, Kiev, Ukrayna, 5 - 06 Ekim 2018, cilt.3, ss.113-123

Productivtiy Control of the Operator via Web- Server with PLC

ERSOY S., BOZKURT Y.

3rd International Congress on Multidisciplinary Studies, Kiev, Ukrayna, 5 - 06 Ekim 2018, cilt.3, ss.104-112

Investigation of Industrial and Organizational Psychology

Ersoy S., Ülkir O., Bozkurt Y.

CIEA 2018 International Conference on İnnovative Engineering Applications, Sivas, Türkiye, 20 - 22 Eylül 2018, cilt.1, ss.1251-1256

Study of Sound Properties of HDPE / SIS Polymer Composites

ERSOY S., BOZTOPRAK Y.

International Conferenceon Innovative engineering Applicaitons, Sivas, Türkiye, 20 - 22 Eylül 2018, cilt.1, ss.1246-1250

Individual Custom Design and Production of Artificial Organs

TEMİZ İ., ERSOY S.

2nd International Congress onAdvances in Bioscience andBiotechnology, Podgorica, Sırbistan Ve Karadağ, 26 - 30 Haziran 2018, cilt.2, ss.1-2

Vibration And Temperature Analysis of a Servo Motorwith Programmable Logic Controller

Sarı M. B., ERSOY S.

23rd International Scientific Conference MECHANIKA 2018, Druskininkai, Litvanya, 18 - 19 Mayıs 2018, cilt.1, ss.141-144

Günümüzde Makineleşmenin İş Kazalarına Etkisi

Uşar D., Uras M., Ersoy S., Bozkurt Y.

1st International Symposium on Multidisciplinary Studies and Innovative Technologies, Antalya, Türkiye, 11 - 13 Nisan 2018, cilt.2, ss.361-365

Automatic integrated glass cleaning system design and architecture

ERSOY S., AYGÜL E., ERTUĞRUL İ.

International Scientific Conference UNITECH’17, Gabrovo, Bulgaristan, 17 - 18 Kasım 2017, cilt.3, ss.43-46

Data transfer in real-time cost calculation

International Scientific Conference “UNITECH 2017”, Gabrovo, Bulgaristan, 17 - 18 Kasım 2017, cilt.2, ss.297-300

Material selection in determination of position and size for artificial organs

ERSOY S., ERTUĞRUL İ., ÜLKİR O.

International Scientific Conference “UNITECH 2017”, Gabrovo, Bulgaristan, 17 - 18 Kasım 2017, cilt.3, ss.80-84

Design and control of plastic bottle breaking and storage machine

ERSOY S., AYGÜL E., TOPTAŞ E.

International Scientific Conference “UNITECH 2017”, Gabrovo, Bulgaristan, 17 - 18 Kasım 2017, cilt.3, ss.61-64

An Investigationon Vibrational Analysis of Cantilever Beams Based on Fiber Breaks in Undirectional Fiber Composites

TOPTAŞ E., ERSOY S., GENÇ G., BOZKURT Y., AKKUŞ N., ERTUĞRUL İ.

International Science and Technology Conference, Berlin, Almanya, 17 - 19 Temmuz 2017, ss.97-103

Comparision of the Vibration Properties of Materials AA2124/SiC/25p and Aluminum 6061-T6

BOZKURT Y., Buçan M., Bacaksız K., TOPTAŞ E., ERSOY S.

International Science and Technology Conference, Berlin, Almanya, 17 - 19 Temmuz 2017, ss.194-197

Aluminyum Alaşımlarının Sürtünme Karıştırma Nokta Kaynağı

Bozkurt Y., Toptaş E., Ersoy S.

International Science and Technology Conference, Berlin, Almanya, 17 - 19 Temmuz 2017, ss.61-67

Endüstri 4.0’ın Türkiye üzerindeki etkileri

Ersoy S., Bozkurt Y., Ertuğrul İ., Ülkir O.

International Symposium on Industry 4.0 and Applications (ISIA 2017), Karabük, Türkiye, 12 - 14 Ekim 2017, ss.44-47

Study on Tribological behaviour for Nano Powder Polymer Blends

Ersoy S., Taşdemir M.

International Science and Technology Conference, Vienna, Avusturya, 12 - 15 Temmuz 2016

Identification of viscoelastic material properties based on Big Bang-Big Crunch optimization method

El Hafidi A., Martin B., ERSOY S.

24th International Conference on Vibroengineering, Shanghai, Çin, 7 - 08 Aralık 2016, cilt.10, ss.102-107

Noise Level Measurement For Fair Area

International Scientific Conference, Gabrovo, Bulgaristan, 18 - 19 Kasım 2016, ss.222-223

The Methods Used In The Automotive Production

International Scientific Conference, Gabrovo, Bulgaristan, 18 - 19 Kasım 2016, ss.293-294

Determining the vibration behavior of metal matrix composite used in aerospace industry by FEM

Bozkurt Y., Ersoy S.

23rd International Conference on Vibroengineering, İstanbul, Türkiye, 7 - 09 Ekim 2016, cilt.9, ss.29-32

Study on tribological behavior for nano powder polymer blends

International Science and Technology Conference (SISTEC 2016), Vienna, Avusturya, 13 - 15 Temmuz 2016

Friction and wear performance of high density polyethylene styrene butadiene rubber polymer blends

International Science and Technology Conference, St. Petersburg, Rusya, 2 - 04 Eylül 2015, cilt.6, ss.773-776

TO MEASURE NOISE LEVELS IN SHOPPING CENTERS

Ersoy S., Girit O.

5. Uluslararası İleri Teknolojiler Sempozyumu, Karabük, Türkiye, 13 - 15 Mayıs 2013, ss.256-259

Investigation of sound properties of High Density Polyethylene / Styrene Butadiene Rubber polymer composites

ERSOY S., El-Hafid A.

International Conference Vibroengineering - 2013, Druskininkai, Litvanya, 17 - 19 Eylül 2013, cilt.1, ss.77-80

Remote Access Control Laboratory Implementation Academic Success Analysis

ERDAL H., ERSOY S., DOĞAN B.

The 6th International Computer and Instructional Technologies Symposium, ICITS2012, Gaziantep, Türkiye, 4 - 06 Ekim 2012, ss.206

PROPERTIES OF POLYMER COMPOSITES FILLED WITH SIO2, ZNO AND MG(OH)(2) NANO POWDER.

TAŞDEMİR M., ERSOY S.

15th International Conference on Experimental Mechanics (ICEM), Porto, Portekiz, 22 - 27 Temmuz 2012

Hassas Medikal Sıvı Akış Kontrol Otomasyonu

Ersoy S., Korkmaz H., Coşgun E., Akar S. B.

II. Ulusal Tıp Bilişimi Kongresi - Turkmia'1, Gazimagusa, Kıbrıs (Kktc), 14 - 17 Ekim 2010, ss.117-122

AN INVESTIGATION OF SOUND ABSORPTION PROPERTIES OF THE. PLAIN AND SPACER WEFT KNITTED FABRICS

YÜKSEK M., Akalin M., ÖZEN M. S., BEYİT A., ERSOY S.

5th International Textile, Clothing and Design Conference, Dubrovnik, Hırvatistan, 3 - 06 Ekim 2010, ss.768-773

MECHANICAL PROPERTIES OF BI-AXIAL GLASS FIBER AND WALNUT SHELL REINFORCED POLYESTER COMPOSITES

SALMAN S., Akalin M., ERSOY S., Kupeli G., Okuscuk E., PAZARLIOĞLU S. S.

5th International Textile, Clothing and Design Conference, Dubrovnik, Hırvatistan, 3 - 06 Ekim 2010, ss.155-159

Meslek Liselerinde Elektronik Bilgisayar Bölümlerindeki Öğrencilerin Eğitim Teknolojilerinin Kullanim Düzey Ve Görüşlerinin Belirlenmesi

International Conference on New Horizons in Education, Gazimagusa, Kıbrıs (Kktc), 23 - 25 Haziran 2010, ss.544-549

Quality Managment for Science Education

Ersoy S., Ruginosu T.

The International Conference Quality In Formal and Non-Formal Education, Iasi, Romanya, 25 - 28 Mayıs 2010, ss.62-69

Learning Methods For Mechatronics Education

Ersoy S., Ruginosu T.

Quality In Formal and Non-Formal Education, Iasi, Romanya, 25 - 28 Mayıs 2010, ss.56-61

The effect of a new teaching methodology on learning performances of automotive - mechatronics students

Ersoy S., Küçük H.

2nd World Conference on Educational Sciences (WCES-2010), İstanbul, Türkiye, 4 - 08 Şubat 2010, cilt.2, ss.310-316

Alışveriş Merkezlerindeki Gürültü Seviyelerinin Ölçülmesi

Ersoy S., Girit O.

5th International Advanced Technologies Symposium (IATS’09), May 13-15 2009, Karabük, (2009), Karabük, Türkiye, 13 - 15 Mayıs 2009

Computer Base Education and Progress Alternative Against High Costed Material for Mechatronic Education

Ersoy S., Görgülü S.

Frontiers in Science Education Research, Gazimagusa, Kıbrıs (Kktc), 22 - 24 Mart 2009, ss.387-391

Defining of conceptions related to their department of candidate teacher of mechatronics education

World Conference on Educational Sciences, Nicosia, CYPRUS, 4 - 07 Şubat 2009, cilt.1, ss.2117-2125

Sound absorption measurements in plastic-based composites the results obtained with the expression of the statistical equations

TOPTAŞ E., ERSOY S.

8th International Conference Vibroengineering 2009, Klaipeda, Litvanya, 16 - 18 Eylül 2009, ss.15-18

The evaluation of the effect of the teaching model produced for automotive mechatronic on learning