Prof.Dr. YUSUF KAYNAK

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Review of current best-practices in machinability evaluation and understanding for improving machining performance

Liao Z., Schoop J. M., Saelzer J., Bergmann B., Priarone P. C., Splettstößer A., et al.

CIRP Journal of Manufacturing Science and Technology , cilt.50, ss.151-184, 2024 (SCI-Expanded)

Machinability of extruded and multi-directionally hot forged eco-friendly brass alloys

Zoghipour N., Tascioglu E., KAYNAK Y.

CANADIAN METALLURGICAL QUARTERLY , cilt.63, sa.2, ss.414-425, 2024 (SCI-Expanded)

Effects of heat treatment on surface integrity and wear performance of Inconel 718 alloy fabricated by laser powder bed fusion process additive manufacturing under different laser power and scanning speed parameters

Sunay N., Kaya M., YILMAZ M. S., KAYNAK Y.

Journal of the Brazilian Society of Mechanical Sciences and Engineering , cilt.45, sa.8, 2023 (SCI-Expanded)

Failure analysis of punches and investigation notch impact strength of tool steel cryogenic treated with tempering used in hot forging

Atay G., Coşkun H., KAYNAK Y.

Canadian Metallurgical Quarterly , 2023 (SCI-Expanded)

Development of a predictive analytical cutting force and torque model for flat bottom drilling of metals using mechanistic approach

Zoghipour N., KAYNAK Y.

Machining Science and Technology , cilt.27, sa.6, ss.697-721, 2023 (SCI-Expanded)

Effect of Drag Finish Post-processing on Surface Integrity and Wear Behavior of Ti-6Al-4V Fabricated by Laser Powder Bed Fusion Additive Manufacturing

Gunessu E., Yilmaz M. S., Tascioglu E., Sharif S., KAYNAK Y.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.31, sa.12, ss.9962-9971, 2022 (SCI-Expanded)

Effect of printing parameters and post-process on surface roughness and dimensional deviation of PLA parts fabricated by extrusion-based 3D printing

Tascioglu E., Kitay O., Keskin A. O., KAYNAK Y.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , cilt.44, sa.4, 2022 (SCI-Expanded)

The effect of cooling on machining and phase transformation responses of Ni-rich NiTiHf high-temperature shape memory alloy

Kaynak Y., Tascioglu E., Sharif S., Suhaimi M. A., Benefan O.

Journal of Manufacturing Processes , cilt.75, ss.1144-1152, 2022 (SCI-Expanded)

Surface Layer Modification by Cryogenic Burnishing of Al 7050- T7451 Alloy With Near Ultra-Fine Grained Structure

Huang B., Kaynak Y., Sun Y., Khraisheh M. K., Jawahir I. S.

Journal of Manufacturing Science and Engineering, Transactions of the ASME , cilt.144, sa.3, 2022 (SCI-Expanded)

Effect of machining and drag finishing on the surface integrity and mechanical properties of Inconel 718 alloys fabricated by laser powder bed fusion additive manufacturing Einfluss der maschinellen Bearbeitung und des Schleppfinishs auf die Oberflächenintegrität und die mechanischen Eigenschaften von additiv gefertigten NiCr19NbMo-Legierungen durch Laserstrahl-Pulverbett-Schmelzen

Karabulut Y., Kaynak Y., Sharif S., Suhaimi M. A.

Materialwissenschaft und Werkstofftechnik , cilt.53, sa.1, ss.109-118, 2022 (SCI-Expanded)

Machining-induced surface integrity of Inconel 718 alloy fabricated by powder bed fusion additive manufacturing under various laser processing parameters

Tascioglu E., KAYNAK Y., Sharif S., Pitir F., Suhaimi M. A.

MACHINING SCIENCE AND TECHNOLOGY , cilt.26, sa.1, ss.49-71, 2022 (SCI-Expanded)

Review on machining of additively manufactured nickel and titanium alloys

Khanna N., Zadafiya K., Patel T., KAYNAK Y., Rashid R. A. R., Vafadar A.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T , cilt.15, ss.3192-3221, 2021 (SCI-Expanded) Sürdürülebilir Kalkınma

Effect of aging and finish machining on the surface integrity of selective laser melted maraging steel

Tascioglu E., Khan H. M., KAYNAK Y., Coskun M., Tarakci G., KOÇ E.

RAPID PROTOTYPING JOURNAL , cilt.27, sa.10, ss.1900-1909, 2021 (SCI-Expanded)

The Effect of Flood, High-Pressure Cooling, and CO2-Assisted Cryogenic Machining on Microhardness, Microstructure, and X-ray Diffraction Patterns of NiTi Shape Memory Alloy

Kitay O., Kaynak Y.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.30, ss.5799-5810, 2021 (SCI-Expanded)

Heat treatment temperature-induced microstructure, microhardness and wear resistance of Inconel 718 produced by selective laser melting additive manufacturing

Karabulut Y., Tascioglu E., KAYNAK Y.

OPTIK , cilt.227, 2021 (SCI-Expanded)

The impact of aging and drag-finishing on the surface integrity and corrosion behavior of the selective laser melted maraging steel samples Einfluss von Alterung und Schleppschleifen auf die Oberflächenintegrität und das Korrosionsverhalten von mit dem selektiven Laserstrahl geschmolzenen Proben aus martensitaushärtbarem Stahl

Khan H., Özer G., Tarakci G., Coskun M., Koc E., KAYNAK Y.

Materialwissenschaft und Werkstofftechnik , cilt.52, sa.1, ss.60-73, 2021 (SCI-Expanded)

Sustainability assessment of in-house developed environment-friendly hybrid techniques for turning Ti-6Al-4V

Agrawal C., Khanna N., Gupta M. K., KAYNAK Y.

Sustainable Materials and Technologies , cilt.26, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma

Progress Toward Modeling and Optimization of Sustainable Machining Processes

Jawahir I. S., Schoop J., KAYNAK Y., Balaji A. K., Ghosh R., Lu T.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME , cilt.142, sa.11, 2020 (SCI-Expanded)

An experimental analysis of minimum chip thickness in micro-milling of two different titanium alloys

ASLANTAŞ K., Alatrushi L. K. H., BEDİR F., KAYNAK Y., Yilmaz N.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE , cilt.234, sa.12, ss.1486-1498, 2020 (SCI-Expanded)

Post-processing effects on the surface characteristics of Inconel 718 alloy fabricated by selective laser melting additive manufacturing

TAŞCIOĞLU E., KAYNAK Y.

ADDITIVE MANUFACTURING , cilt.5, sa.2, ss.221-234, 2020 (SCI-Expanded)

Influence of heat treatment temperature on the microstructural, mechanical, and wear behavior of 316L stainless steel fabricated by laser powder bed additive manufacturing

Tascioglu E., Karabulut Y., KAYNAK Y.

International Journal of Advanced Manufacturing Technology , cilt.107, sa.5-6, ss.1947-1956, 2020 (SCI-Expanded)

The effect of cutting parameters and cutting tools on machining performance of carbon graphite material

Tankus K., Tascioglu E., Atay G., Brunken H., Kaynak Y.

MACHINING SCIENCE AND TECHNOLOGY , cilt.24, sa.1, ss.96-111, 2020 (SCI-Expanded)

Chip Formation and Phase Transformation in Orthogonal Machining of NiTi Shape Memory Alloy: Microstructure-based Modelling and Experimental Validation

KAYNAK Y., Manchiraju S., Jawahir I., Biermann D.

CIRP Annals , cilt.69, ss.85-88, 2020 (SCI-Expanded)

Influence of the post-processing operations on surface integrity of metal components produced by laser powder bed fusion additive manufacturing: a review

Khan H. M., KARABULUT Y., Kitay O., KAYNAK Y., Jawahir I.

Machining Science and Technology , cilt.25, sa.1, ss.118-176, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma

Evaluation of boron nitride nanoparticles on delamination in drilling carbon fiber epoxy nanocomposite materials

Burak Kaybal H., Unuvar A., Kaynak Y., Avci A.

JOURNAL OF COMPOSITE MATERIALS , cilt.54, sa.2, ss.215-227, 2020 (SCI-Expanded)

High speed machining of near-beta titanium Ti-5553 alloy under various cooling and lubrication conditions

Taşcıoğlu E., Gharibi A., Kaynak Y.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.102, ss.4257-4271, 2019 (SCI-Expanded)

Machinability of Ni-rich NiTiHf high temperature shape memory alloy

Kirmacioglu E., Kaynak Y., Benafan O.

SMART MATERIALS AND STRUCTURES , cilt.28, sa.5, 2019 (SCI-Expanded)

Cryogenic Machining of Titanium Ti-5553 Alloy

Kaynak Y., Gharibi A.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME , cilt.141, 2019 (SCI-Expanded)

The effect of post-processing operations on surface characteristics of 316L stainless steel produced by selective laser melting

Kaynak Y., Kitay O.

ADDITIVE MANUFACTURING , cilt.26, ss.84-93, 2019 (SCI-Expanded)

The influence of depth of cut on cryogenic machining performance of hardened steel

Gharibi A., KAYNAK Y.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.34, sa.2, ss.582-596, 2019 (SCI-Expanded)

Micro milling of NiTi shape memory alloy and determination of critical chip thickness

Aslantas K., KAYNAK Y.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.34, sa.3, ss.1202-1211, 2019 (SCI-Expanded)

A comparison of flood cooling, minimum quantity lubrication and high pressure coolant on machining and surface integrity of titanium Ti-5553 alloy

Kaynak Y., Gharibi A., Yilmaz U., Koklu U., Aslantas K.

JOURNAL OF MANUFACTURING PROCESSES , cilt.34, ss.503-512, 2018 (SCI-Expanded)

Experimental and numerical study of chip formation in orthogonal cutting of Ti-5553 alloy: the influence of cryogenic, MQL, and high pressure coolant supply

KAYNAK Y., Gharibi A., Ozkutuk M.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.94, ss.1411-1428, 2018 (SCI-Expanded)

Surface Characteristics of Machined NiTi Shape Memory Alloy: The Effects of Cryogenic Cooling and Preheating Conditions

Kaynak Y., Huang B., Karaca H. E., Jawahir I. S.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.26, ss.3597-3606, 2017 (SCI-Expanded)

Micro-drilling of Ti-6Al-4V alloy: The effects of cooling/lubricating

Percin M., Aslantas K., Ucun I., Kaynak Y., Cicek A.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY , cilt.45, ss.450-462, 2016 (SCI-Expanded)

Cryogenic cooling-induced process performance and surface integrity in drilling CFRP composite material

Xia T., Kaynak Y., Arvin C., Jawahir I. S.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.82, ss.605-616, 2016 (SCI-Expanded)

The Effect of Active Phase of the Work Material on Machining Performance of a NiTi Shape Memory Alloy

KAYNAK Y., Karaca H. E., Noebe R. D., Jawahir I. S.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE , sa.6, ss.2625-2636, 2015 (SCI-Expanded)

Cutting Speed Dependent Microstructure and Transformation Behavior of NiTi Alloy in Dry and Cryogenic Machining

Kaynak Y., Karaca H. E., Jawahir I. S.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.24, sa.1, ss.452-460, 2015 (SCI-Expanded)

Progressive tool-wear in machining of room-temperature austenitic NiTi alloys: The influence of cooling/lubricating, melting, and heat treatment conditions

Kaynak Y., Robertson S. W., Karaca H. E., Jawahir I. S.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , cilt.215, ss.95-104, 2015 (SCI-Expanded)

Machining and Phase Transformation Response of Room-Temperature Austenitic NiTi Shape Memory Alloy

Kaynak Y.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.23, sa.9, ss.3354-3360, 2014 (SCI-Expanded)

Evaluation of machining performance in cryogenic machining of Inconel 718 and comparison with dry and MQL machining

Kaynak Y.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.72, ss.919-933, 2014 (SCI-Expanded)

Cryogenic Machining-Induced Surface Integrity: A Review and Comparison with Dry, MQL, and Flood-Cooled Machining

Kaynak Y., Lu T., Jawahir I. S.

MACHINING SCIENCE AND TECHNOLOGY , cilt.18, ss.149-198, 2014 (SCI-Expanded)

The effects of machining on the microstructure and transformation behavior of NiTi Alloy

KAYNAK Y., Tobe H., Noebe R. D., KARACA H. A., Jawahir I. S.

SCRIPTA MATERIALIA , cilt.74, ss.60-63, 2014 (SCI-Expanded)

Tool-wear analysis in cryogenic machining of NiTi shape memory alloys: A comparison of tool-wear performance with dry and MQL machining

Kaynak Y., Karaca H. E., Noebe R. D., Jawahir I. S.

WEAR , cilt.306, ss.51-63, 2013 (SCI-Expanded)

Influence of molding conditions on the shrinkage and roundness of injection molded parts

KURT M., KAYNAK Y., Kamber O. S., MUTLU B., BAKIR B., Koklu U.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.46, ss.571-578, 2010 (SCI-Expanded)

Static, dynamic and fatigue analysis of a semi-automaticgun locking block

Ozmen D., KURT M., EKİCİ B., KAYNAK Y.

ENGINEERING FAILURE ANALYSIS , cilt.16, sa.7, ss.2235-2244, 2009 (SCI-Expanded)

Experimental investigation of plastic injection molding: Assessment of the effects of cavity pressure and mold temperature on the quality of the final products

Kurt M., Kamber O. S., Kaynak Y., Atakök G., Girit O.

MATERIALS & DESIGN , cilt.30, ss.3217-3224, 2009 (SCI-Expanded)

Dimensional analyses and surface quality of the laser cutting process for engineering plastics

Kurt M., Kaynak Y., Bagci E., Demirer H., Kurt M.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.41, ss.259-267, 2009 (SCI-Expanded)

Application of Taguchi methods in the optimization of cutting parameters for surface finish and hole diameter accuracy in dry drilling processes

KURT M., Bagci E., KAYNAK Y.

International Journal of Advanced Manufacturing Technology , cilt.40, ss.458-469, 2009 (SCI-Expanded)

Evaluation of drilled hole quality in Al 2024 alloy

Kurt M., Kaynak Y., Bagci E.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.37, ss.1051-1060, 2008 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Designing a special cutting tool for high performance machining of CuZn40Pb2 brass alloy

ÇİÇEK S., ALTUN A., ZOGHİPOUR N., KAYNAK Y.

Journal of Advances in Manufacturing Engineering , cilt.2, sa.2, ss.25-32, 2021 (Hakemli Dergi)

Multi-objective Optimization of Cutting Parameters for Machining Process of Ni-Rich NiTiHf High-Temperature Shape Memory Alloy Using Genetic Algorithm

Kabil A. O., KAYNAK Y., Saruhan H., Benafan O.

SHAPE MEMORY AND SUPERELASTICITY , cilt.7, ss.270-279, 2021 (ESCI) Sürdürülebilir Kalkınma

Improving the surface quality and mechanical properties of selective laser sintered PA2200 components by the vibratory surface finishing process

Khan H. M., ŞİRİN T., Tarakci G., Bulduk M. E., Coskun M., KOÇ E., et al.

SN APPLIED SCIENCES , cilt.3, sa.3, 2021 (ESCI)

Investigation machining-surface integrity-wear resistance relationships of 316LVM stainless steel material machined under various cutting parameters

Ucurum M., Gunessu E., ŞİRİN T., KAYNAK Y.

PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , cilt.27, sa.4, ss.449-457, 2021 (ESCI)

CHEMICAL POST-PROCESSING METHODS FOR ENHANCING SURFACE PROPERTIES OF PARTS FABRICATED BY ADDITIVE MANUFACTURING: A REVIEW

Kaynak Y., Sunay N., Kaya M.

Sigma Journal of Engineering and Natural Sciences , cilt.38, sa.4, ss.2027-2042, 2020 (ESCI)

Farklı Sertlik Değerlerindeki W360 Sıcak İş Takım Çeliğinin Yüksek Sıcaklıkta Aşınma Davranışı ve Çentik Darbe Dayanımının İncelenmesi

Kaynak Y., Taşcıoğlu E.

Makina Tasarım ve İmalat Dergisi , cilt.18, sa.2, ss.75-81, 2020 (Hakemli Dergi) Sürdürülebilir Kalkınma

Surface Integrity and Wear Resistance of Maraging Steel Produced by Additive Manufacturing Direct Metal Laser Sintering

Kaynak Y., Şirin T. B.

JOURNAL OF ADVANCES IN MANUFACTURING ENGINEERING , cilt.1, sa.3, ss.83-92, 2020 (Hakemli Dergi)

The effects of cutting parameters on machining performance of titanium alloy Ti-5553

KAYNAK Y., GHARIBI A.

Advances in Materials and Processing Technologies , cilt.5, sa.2, ss.317-328, 2019 (ESCI)

Finish machining-induced surface roughness, microhardness and XRD analysis of selective laser melted Inconel 718 alloy

Kaynak Y., Taşçıoğlu E.

Procedia CIRP , cilt.71, ss.500-504, 2018 (Hakemli Dergi)

Progressive Tool Wear in Cryogenic Machining: The Effect of Liquid Nitrogen and Carbon Dioxide

KAYNAK Y., GHARIBI A.

Journal of Manufacturing and Materials Processing , cilt.2, sa.2, ss.31, 2018 (ESCI)

Porosity, Surface Quality, Microhardness and Microstructure of Selective Laser Melted 316L Stainless Steel Resulting from Finish Machining

Kaynak Y., Özhan K.

Journal of Manufacturing and Materials Processing , cilt.2, sa.2, ss.1-14, 2018 (ESCI)

15-5 PH Çelik Malzemesinin Kriyojenik Talaşlı İmalat Sürecinde Yüzey Bütünlüğü Analizi

Kaynak Y., Duman E.

Makina Tasarım ve İmalat Dergisi (MATIM) , cilt.15, sa.1, ss.19-26, 2017 (Hakemli Dergi)

Improved surface integrity from cryogenic machining of Al 7050 T7451 alloy with ultrafine grained structure

Huang B., KAYNAK Y., Arvin C., Jawahir i.

Advances in Materials and Processing Technologies , cilt.1, ss.361-374, 2015 (Scopus)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Investigation of machining performance of lead-free brass materials forged in different conditions after cooling with liquid nitrogen

Atay G., Zoghipour N., KAYNAK Y.

26th International ESAFORM Conference on Material Forming, ESAFORM 2023, Krakow, Polonya, 19 - 21 Nisan 2023, cilt.28, ss.1357-1366

Evaluation of the surface integrity characteristics of internal threads machined on lead-free brass alloy

Zoghipour N., Toraman Y., Kara K., Bas K. C., KAYNAK Y.

26th International ESAFORM Conference on Material Forming, ESAFORM 2023, Krakow, Polonya, 19 - 21 Nisan 2023, cilt.28, ss.1303-1312

Development of an artificial neural network model for criticizing the burr formation during flat bottom drilling of CuZn38As brass alloy considering cutting tool geometry

Zoghipour N., Celik F., Tascioglu E., KAYNAK Y.

19th CIRP Conference on Modeling of Machining Operations, CMMO 2023, Karlsruhe, Almanya, 31 Mayıs - 02 Haziran 2023, cilt.117, ss.396-401

Machining-induced Surface Integrity in Brass Alloys

Tascioglu E., Zoghipour N., Sharif S., KAYNAK Y.

6th CIRP Conference on Surface Integrity, CSI 2022, Lyon, Fransa, 8 - 10 Haziran 2022, cilt.108, ss.654-659

The influence of edge radius and lead content on machining performance of brass alloys

Zoghipour N., Tascioglu E., Celik F., KAYNAK Y.

15th CIRP Conference on Intelligent Computation in Manufacturing Engineering, ICME 2021, Naples, İtalya, 14 - 16 Temmuz 2021, cilt.112, ss.274-279

Enhancing Surface Integrity of Additively Manufactured Inconel 718 by Roller Burnishing Process

Yaman N., Sunay N., KAYA M., KAYNAK Y.

6th CIRP Conference on Surface Integrity, CSI 2022, Lyon, Fransa, 8 - 10 Haziran 2022, cilt.108, ss.681-686

Multi objective optimization of rough pocket milling strategies during machining of lead-free brass alloys using Desirability function and Genetic algorithms-based analysis

Zoghipour N., Yaratan A. F., KAYNAK Y.

14th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME 2020, Naples, İtalya, 15 - 17 Temmuz 2020, cilt.99, ss.145-150

Prediction of residual stress and distortion in laser powder bed fusion additive manufacturing process of Inconel 718 alloy

Sirin T. B., KAYNAK Y.

14th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME 2020, Naples, İtalya, 15 - 17 Temmuz 2020, cilt.99, ss.330-335

Machining-induced surface integrity of holes drilled in lead-free brass alloy

Zoghipour N., Tascioglu E., Atay G., Kaynak Y.

5th CIRP Conference on Surface Integrity, CSI 2020, 1 - 05 Haziran 2020, cilt.87, ss.148-152

Drilling process and resulting surface properties of Inconel 718 alloy fabricated by Selective Laser Melting Additive Manufacturing

Karabulut Y., KAYNAK Y.

5th CIRP Conference on Surface Integrity, CSI 2020, 1 - 05 Haziran 2020, cilt.87, ss.355-359

Şekil hafızalı Nitihf alaşım malzemesinden talaş kaldırma sürecinin sonlu elemanlar yöntemiyle modellenerek simülasyonu ve deneysel verilerle doğrulanması

Karabulut Y., Tascioglu E., Kaynak Y.

10th INTERNATIONAL CONGRESS ON MACHINING, Antalya, Türkiye, 25 Ekim 2019, ss.1-10

Farkli kesme parametreleri kullanılarakişlenmiş 15-5PH martenzitik paslanmaz çelikmalzemesinin yüzey bütünlüğü ve aşınmaperformansının incelenmesi

GÜNEŞSU E., KAYNAK Y.

10th INTERNATIONAL CONGRESS ON MACHINING, 7 - 09 Kasım 2019, ss.279-285 Sürdürülebilir Kalkınma

Farklı kesme parametreleri kullanılarak işlenmiş 15- 5PH martenzitik paslanmaz çelik malzemesinin yüzey bütünlüğü ve aşınma performansının incelenmesi

Kaynak Y., Güneşsu E.

10th INTERNATIONAL CONGRESS ON MACHINING, Antalya, Türkiye, 7 - 09 Kasım 2019, ss.1-10 Sürdürülebilir Kalkınma

Farklı kesme koşullarında işlenmiş Ti-5553 alaşım malzemesinin aşınma dayanımının incelenmesi

Şirin T. B., Tascioglu E., Kaynak Y.

10th INTERNATIONAL CONGRESS ON MACHINING, Antalya, Türkiye, 7 - 09 Kasım 2019, ss.1-10 Sürdürülebilir Kalkınma

Kriyojenik soğutma kullanılarak işlenmiş kurşunsuz pirinç malzemelerin yüzey bütünlüğü karakteristiklerinin incelenmesi

Tascioglu E., Çiçek S., Kaynak Y.

10th INTERNATIONAL CONGRESS ON MACHINING, Antalya, Türkiye, 7 - 09 Kasım 2019, ss.1-10

The effect of post processing on surface properties Of as-printed and heat treated Ti-6Al-4V alloy Produced by electron beam melting

Şirin T. B., Tan E., Gümüş B., Kaynak Y.

AMCTurkey 2019, İstanbul, Türkiye, 17 - 18 Ekim 2019, ss.110-112

Heat treatment temperature-induced microstructure, Microhardness and wear resistance of Inconel 718 Produced by selective laser melting

Karabulut Y., İnce İ., Tascioglu E., Kaynak Y.

AMCTurkey 2019, İstanbul, Türkiye, 17 - 18 Ekim 2019, ss.113-115

Surface integrity and wear resistance of maraging steel produced by Additive Manufacturing Direct Metal Laser Sintering

Kaynak Y.

İMCC2019, Shenyang, Çin, 9 - 12 Ekim 2019, ss.651-661

Cryogenic Machining of Advanced Engineering Materials

Kaynak Y.

IMCC2019, Shenyang, Çin, 9 - 12 Ekim 2019, ss.28

The Effect of Finish-Milling Operation on Surface Quality and Wear Resistance of Inconel 625 Produced by Selective Laser Melting Additive Manufacturing

TAŞCIOĞLU E., KAYNAK Y., POYRAZ Ö., ORHANGÜL A., ÖREN S.

INCASE2019, Singapore, Singapur, 12 Eylül 2019

Surface Integrity Characteristics of NiTiHf High Temperature Shape Memory Alloys

KAYNAK Y., TAŞCIOĞLU E., Benafan O.

INCASE2019, Singapore, Singapur, 10 - 12 Eylül 2019, ss.254-262

Ti-5553 Alaşım Malzemesinin Talaşlı İşlenmesinin Sonlu Elemanlar Yöntemiyle Modellenmesi Ve Deneysel Doğrulama

TAŞCIOĞLU E., ÖZKÜTÜK M., KAYNAK Y.

International Congress on Machining, Antalya, Türkiye, 8 - 10 Kasım 2018

Martenzit Paslanmaz Çelik Malzemenin Kriyojenik Koşullarda Kesilme Sürecinin Deneysel İncelenmesi

Demirtaş E., Kırmacıoğlu E., Altay Ç., Gizem Ş., Kaynak Y.

International Congress on Machining, Antalya, Türkiye, 8 - 10 Kasım 2018

Pirinç malzemelerin delinmesi sürecinde kesici takım yuvarlanma yarıçapının iş parçası yüzey bütünlüğüne etkisi

ÇİÇEK S., İLBAY K., TAŞCIOĞLU E., KAYNAK Y.

the 18th International Conference on Machine Design and Production ( UMTIK 2018), 3 - 06 Temmuz 2018

Seçici Lazerle Ergitme Yöntemi İle Üretilen Inconel 625 Alaşımlı Parçada Yüzey Bütünlüğünün İncelenmesi

KITAY Ö., TAŞCIOĞLU E., KAŞ M., NESLİ Ş., KAYNAK Y., YILMAZ O.

18th International Conference on Machine Design and Production (UMTIK 2018), 3 - 06 Temmuz 2018

Şekil Hafızalı NiTi Alaşımın Kuru, MQL ve Kriyojenik Koşullarda İşlenmesinde Kesici Takım Aşınmasıyla İş Parçası Yüzey Kalitesi Arasındaki İlişkinin Araştırılması

KITAY Ö., KAYNAK Y.

18th International Conference on Machine Design and Production (UMTIK 2018), 3 - 06 Temmuz 2018 Sürdürülebilir Kalkınma

The Effects of Cutting Parameters on Machining Performance of Titanium Alloy Ti-5553

KAYNAK Y., GHARIBI A.

Advances in Materials and Processing Technologies (AMPT) conference, Chennai, Hindistan, 11 - 14 Aralık 2017

Machining Process and Surface Integrity Characteristics of316LVM Stainless Steel

TAŞCIOĞLU E., DENGİZ M., SARIÇAN Ö., KAYNAK Y.

8th International Advanced Technologies Symposium, Elazığ, Türkiye, 19 - 22 Ekim 2017, ss.3856-3864

Machining Process of Additively Manufactured 316L StainlessSteel

TAŞCIOĞLU E., DENGİZ M., SARIÇAN Ö., KAYNAK Y.

8th International Advanced Technologies Symposium, Elazığ, Türkiye, 19 - 22 Ekim 2017, ss.3848-3855

Şekil Hafızalı NiTi Alaşımın Mikro Frezelenmesinde Kritik Talaş Kalınlığının Belirlenmesi

ASLANTAŞ K., KAYNAK Y.

8th International Symposium on Machining ( UTIS 2017), Antalya, Türkiye, 3 - 05 Kasım 2017, ss.169-179

P20 Takım Çeliğinin Karbondioksit Yardımlı Talaşlı İmalat Performansının Değerlendirilmesi

KITAY Ö., KIRMACIOĞLU K. E., KAYNAK Y.

8th International Symposium on Machining (UTIS 2017), Antalya, Türkiye, 3 - 05 Kasım 2017, ss.206-218

316L Paslanmaz Çeliklerin Kriyojenik Talaşlı İmalatında Nozul Konumlarının Etkisi

KAYNAK Y., GHARIBI A., TAŞCIOĞLU E., KURT M., AY M.

8th International Symposium on Machining (UTIS 2017), Antalya, Türkiye, 3 - 05 Kasım 2017, ss.479-489

The effect of material parameters on chip formation in orthogonal cutting simulation of Ti-5553 Alloy

Ozkutuk M., KAYNAK Y.

16th CIRP Conference on Modelling of Machining Operations (16th CIRP CMMO), Cluny, Fransa, 15 - 16 Haziran 2017, cilt.58, ss.305-310

Havacılık ve Savunma Sanayinde Kullanılan Paslanmaz Çelik Malzemelerin Talaşlı İmalat Sürecinde Yüzey Bütünlüğü Analizi

DUMAN E., KAYNAK Y.

II Uluslararası Savunma Sanayi Sempozyumu, 6 - 08 Nisan 2017

The Influence Of Liquid Nitrogen And Carbon Dioxide Cryogenic Coolants On Machining Performance Of Hardened Steel

GHARIBI A., KAYNAK Y.

7th International Symposium on Machining, İstanbul, Türkiye, 3 - 05 Kasım 2016, ss.177-191

316LPaslanmaz Çelik Malzemelerin Kriyojenik Talaşlı İmalat Sürecinde Yüzey Bütünlüğü Analizi

DUMAN E., KAYNAK Y.

7th International Symposium on Machining, İstanbul, Türkiye, 3 - 05 Kasım 2016, ss.253-265

Kurşunsuz Pirinç Malzemelerin Talaşlı İmalat Performansının Araştırılması

Taşcıoğlu E., KAYNAK Y.

7th International Symposium on Machining, 3 - 05 Kasım 2016

Tool Wear and Surface Quality in Machining Process of Stainless Steel The Effects of Various Coolant Supply Pressures

GHARİBİ A., KAYNAK Y.

XIIIth International Conference on High Speed Machining, Metz, Fransa, 4 - 05 Ekim 2016

Progressive Tool Wear in Cryogenic Machining

KAYNAK Y., GHARİBİ A.

XIIIth International Conference on High Speed Machining, Metz, Fransa, 4 - 05 Ekim 2016

Şekil Hafızalı Alaşımın Mikro Frezelenmesinde Farklı Soğutma ve Yağlama Tekniklerinin Etkisinin İncelenmesi

UCUN İ., KAYNAK Y., ASLANTAŞ K., PERÇİN M.

17th INTERNATIONAL CONFERENCE ON MACHINE DESIGN AND PRODUCTION, 12 - 15 Temmuz 2016

The Effects of Liquid Nitrogen and Carbon Dioxide Cryogenic Coolants on Progressive Tool Wear

GHARIBI A., DUMAN E., ÖZKÜTÜK M., KAYNAK Y.

17th INTERNATIONAL CONFERENCE ON MACHINE DESIGN AND PRODUCTION, 12 - 15 Temmuz 2016

The effects of High Pressure Coolant on Progressive Tool Wear in Machining Stainless Steel

GHARIBI A., KAYNAK Y.

17th INTERNATIONAL CONFERENCE ON MACHINE DESIGN AND PRODUCTION, 12 - 15 Temmuz 2016

Surface Layer Modification by Cryogenic Burnishing of Al 7050-T7451 Alloy and Validation with FEM-Based Burnishing Model

Huang B., Kaynak Y., Sun Y., Jawahir I. S.

15th CIRP Conference on Modelling of Machining Operations (CMMO), Karlsruhe, Almanya, 11 - 12 Haziran 2015, cilt.31, ss.1-6

Modeling and Simulation of Machining-Induced Surface Integrity Characteristics of NiTi Alloy

Kaynak Y., Manchiraju S., Jawahir I. S.

15th CIRP Conference on Modelling of Machining Operations (CMMO), Karlsruhe, Almanya, 11 - 12 Haziran 2015, cilt.31, ss.557-562

Sustainable Technologies for Processing of Metallic Materials

Kaynak Y.

Sustainable Technologies of Metallic Materials, Maribor, Slovenya, 2 - 05 Haziran 2015, ss.27-37

Cryogenic cooling induced machining performance of AISI 1045 steel

Kaynak Y.

2nd International Iron and Steel Symposium (IISS'15)/2. Uluslararası Demir Çelik Sempozyumu, Karabük, Türkiye, 1 - 03 Nisan 2015, ss.390-394

Surface integrity characteristics of NiTi shape memory alloys resulting from dry and cryogenic machining

Kaynak Y., Karaca E., Jawahir I. S.

2nd CIRP Conference on Surface Integrity (CSI), Nottingham, Birleşik Krallık, 28 - 30 Mayıs 2014, cilt.13, ss.393-398

The Impact of Novel Material Processing Methods on Component Quality, Life and Performance

Jawahir I. S., Kaynak Y., Lu T.

3rd International Conference on Through-life Engineering Services (TESConf), Cranfield, ENGLAND, 4 - 05 Kasım 2014, cilt.22, ss.33-44

Analysis of Tool-wear and Cutting Force Components in Dry, Preheated, and Cryogenic Machining of NiTi Shape Memory Alloys

Kaynak Y., Karaca H. E., Noebe R. D., Jawahir I. S.

14th CIRP Conference on Modeling of Machining Operations (CIRP CMMO), Torino, İtalya, 13 - 14 Haziran 2013, cilt.8, ss.498-503

Cryogenic Machining of Hard-to-machine Material, AISI 52100: A Study of Chip Morphology and Comparison with Dry Machining

Huang A., Kaynak Y., Umbrello D., Jawahir I. S.

10th Asia-Pacific Conference on Materials Processing (APCMP 2012), Jinan, Çin, 14 - 17 Haziran 2012, cilt.500, ss.140-145

Experimental Techniques for Temperature Measurement In Drilling A Review with Application

KURT M., KAYNAK Y., Köklü U.

13th International Materials Symposium (IMSP’2010), Denizli, Türkiye, 13 - 15 Ekim 2010, cilt.1, ss.573-584

Optimization of The Workpiece Temperature When Dry Drilling An Aluminum Aerospace Alloy

KURT M., KAYNAK Y., ATAKÖK G., YAYLA A. Y., İNAN A. T.

13th International Materials Symposium (IMSP’2010), Pamukkale Üniversitesi, 14 Ekim 2010

Al 2024 T4 Alüminyumun Elmas Benzeri Karbon DLC Kaplanmış Matkaplarla Delinmesinde Kesme Parametrelerinin Deneysel İncelenmesi ve Taguchi Optimizasyonu

KURT M., KAYNAK Y., BAKIR B., KÖKLÜ U., ATAKÖK G., Kutlu L.

5.Uluslararası İleri Teknolojiler Sempozyumu (IATS’09), Karabük, Türkiye, 13 - 15 Mayıs 2009, cilt.1, ss.2285-2290

Al 2014 T4 Alüminyumun Elmas Benzeri Karbon DLC Kaplanmış Matkaplarla Delinmesinde Kesme Parametrelerinin Deneysel İncelenmesi ve Taguchi Optimizasyonu

KURT M., KAYNAK Y., BAKIR B., KÖKLÜ U., ATAKÖK G., KUTLU L.

5th International Advanced Technologies Symposium (IATS’09), Karabük Üniversitesi, 13 Mayıs 2009

Metrikler

Yayın

122

Atıf (WoS)

1722

H-İndeks (WoS)

Atıf (Scopus)

2052

H-İndeks (Scopus)

Proje

Tez Danışmanlığı

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Diğer Dergilerde Yayınlanan Makaleler

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Metrikler

Yayın

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Proje

Tez Danışmanlığı

Açık Erişim