Yayınlar & Eserler

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Compressed Biogas-Diesel Dual-Fuel Engine Optimization Study for Ultralow Emission

ADVANCES IN MECHANICAL ENGINEERING, 2014 (SCI İndekslerine Giren Dergi) identifier

Renewable energy perspectives in the frame of Turkey's and the EU's energy policies

ENERGY CONVERSION AND MANAGEMENT, cilt.63, ss.233-238, 2012 (SCI İndekslerine Giren Dergi) identifier identifier

Effects of the injection parameters and compression ratio on the emissions of a heavy-duty diesel engine

INTERNATIONAL JOURNAL OF VEHICLE DESIGN, cilt.59, ss.147-163, 2012 (SCI İndekslerine Giren Dergi) identifier identifier

A mathematical model for condensation of bubbles injected through an orifice into subcooled water

Energy Education Science And Technology Part A-Energy Science And Research, cilt.24, ss.151-171, 2010 (SCI Expanded İndekslerine Giren Dergi) identifier identifier

Experimental investigation of granular flow through an orifice

POWDER TECHNOLOGY, cilt.186, ss.65-71, 2008 (SCI İndekslerine Giren Dergi) identifier

Diğer Dergilerde Yayınlanan Makaleler

A comparative CFD analysis of NACA0012 and NACA4412 airfoils

Journal of Energy Systems, cilt.2, ss.145-159, 2018 (Diğer Kurumların Hakemli Dergileri)

EXERGO-ECONOMIC ANALYSIS OF MICROCHANNELS IN SINGLE-PHASE FLOW

JOURNAL OF THERMAL ENGINEERING, cilt.4, ss.2371-2380, 2018 (ESCI İndekslerine Giren Dergi) identifier identifier

ADVANCED NUMERICAL AND EXPERIMENTAL STUDIES ON CI ENGINE EMISSIONS

JOURNAL OF THERMAL ENGINEERING, cilt.4, ss.2234-2247, 2018 (ESCI İndekslerine Giren Dergi) identifier identifier

CI ENGINE MODELING AND EXPERIMENTAL STUDIES FOR LOWEREXHAUST EMISSIONS

FUELS, FIRE AND COMBUSTION IN ENGINEERING JOURNAL, cilt.4, ss.4-13, 2016 (Diğer Kurumların Hakemli Dergileri)

One Dimensional Modeling of Gasoline Alcohol Dual Fuel Combustion Engine

The International Journal of Energy Engineering Sciences, cilt.1, ss.23-34, 2016 (Diğer Kurumların Hakemli Dergileri)

Car Window Filming Tinting and Shading s Fuel Emission Reduction and Economic Analysis around WA NY NC USA and Istanbul Turkey

Journal of Energy and Power Sources, cilt.2, ss.6-21, 2015 (Diğer Kurumların Hakemli Dergileri)

Geçmişten Günümüze Otomobil Teknolojileri

Mimar ve Mühendis Dergisi, ss.60-63, 2012 (Hakemsiz Dergi)

Effect of the geometry of the digester mixer on biogas production

FUTURE ENERGY SOURCES , cilt.1, ss.133-150, 2009 (Diğer Kurumların Hakemli Dergileri)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

NUMERICAL INVESTIGATION OF PPCI STRATEGY FOR HIGH-EFFICIENCY COMBUSTION

International Conference on Progresses in Automotive Technologies 2020, İstanbul, Türkiye, 28 - 29 Aralık 2020

A comparative CFD analysis of NACA0012 and NACA4412 airfoil

Sixth European Conference on Renewable Energy Systems (ECRES2018), İstanbul, Türkiye, 25 - 27 Haziran 2018

Ethanol-Gasoline Fuel Blend Combustion Study in Si Engine

7th Annual Meeting of the Saudi Arabian Section of Combustion Institute, CİDDE, Suudi Arabistan, 21 - 22 Mayıs 2017, cilt.1

EXERGY ANALYSIS OF METALLIC RECTANGULAR MICROCHANNELS UNDER SINGLE-PHASE FLOW CONDITIONS

INTERNATIONAL CONFERENCE ON ENERGY AND THERMAL ENGINEERING: ISTANBUL 2017, İstanbul, Türkiye, 25 - 28 Nisan 2017

EXERGO-ECONOMIC ANALYSIS OF METALLIC RECTANGULAR MICROCHANNELS IN SINGLE-PHASE FLOW

INTERNATIONAL CONFERENCE ON ENERGY AND THERMAL ENGINEERING: ISTANBUL 2017, İstanbul, Türkiye, 25 - 28 Nisan 2017

New Building Materials for Better Energy Efficiency: Case Study

Sixth International Conference on Science Development, 14 - 15 Mart 2017

CI Engine Modeling and Experimental Studies at Marmara University for Lower Exhaust Emissions

Twelfth International Conference of Fluid Dynamics, Kahire, Mısır, 19 - 20 Aralık 2016

One Dimensional Modeling of Gasoline Alcohol Dual Fuel Combustion Engine

UEMK 2016 Conference Proceedings, Gaziantep, Türkiye, 13 - 14 Ekim 2016, ss.82-92

ADVANCED NUMERICAL AND EXPERIMENTAL STUDIES ON CI ENGINE EMISSIONS

INTERNATIONAL CONFERENCE ON ADVANCES IN AUTOMOTIVE TECHNOLOGIES 2016, İstanbul, Türkiye, 11 - 14 Ekim 2016, ss.44-54

The Generation of Typical Meteorological Year and Climatic Database of Turkey for the Energy analysis of Buildings

XII. International HVAC+R Technology Symposium, İstanbul, Türkiye, 31 Mart - 02 Nisan 2016, ss.228-233

Modelling and thermal analysis of high power LED armature Türkiye

International Symposium on Computing in Science and Engineering, Aydın, Türkiye, 24 - 25 Ekim 2013

Renewable energy Policies In the Case of the EU and Turkey 6 8 October 2011 İstanbul Türkiye

International 100% Renewable Energy Conference and Exhibition (IRENEC 2011), İstanbul, Türkiye, 6 - 08 Ekim 2011

Numerical Simulation and Optimization of Solar Tower

Tenth International Conference on Sustainable Energy Technologies, İstanbul, Türkiye, 4 - 09 Eylül 2011

Renewable Energy In The Context Of Turkey s And The EU s Energy Policies

Tenth International Conference on Sustainable Energy Technologies, İstanbul, Türkiye, 4 - 07 Eylül 2011

Energy And Exergy Analysis of A Heavy Duty CI Engine

Tenth International Conference on Sustainable Energy Technologies, İstanbul, Türkiye, 4 - 07 Eylül 2011

CFD Analysis of Combustion and Performance in a Diesel Engine

7th International Conference on Computational Heat and Mass Transfer, İstanbul, Türkiye, 18 - 22 Temmuz 2011

Heat Transfer Modeling Of a Diesel Engine

7th International Conference on Computational Heat and Mass Transfer, İstanbul, Türkiye, 18 - 22 Temmuz 2011 identifier identifier

Multi Dimensional Modeling of Heat and Mass Transfer of Liquid Films and Spray Wall Interactions

7th International Conference on Computational Heat and Mass Transfer, İstanbul, Türkiye, 18 Temmuz 2011 - 22 Nisan 2015

Combustion Optimization and HCCI Modeling for ultra low Emission

6th International Green Energy Conference (IGEC-6), Eskişehir, Türkiye, 5 - 09 Haziran 2011

Multi Dimensıonal Modeling of a CI Engine

6th International Green Energy Conference (IGEC-6), Eskişehir, Türkiye, 5 - 09 Haziran 2011

Design Consideration of Solar Powered Cars

6th International Green Energy Conference (IGEC-6), Eskişehir, Türkiye, 5 - 09 Haziran 2011

CFD Sımulation of a Solar Tower

6th International Green Energy Conference (IGEC-6), Eskişehir, Türkiye, 5 - 09 Haziran 2011

Comparison of Turbulence Models for a Heavy Duty Diesel Engine

Second International Symposium on Computing in Science & Engineering, Kusadası, Türkiye, 1 - 04 Haziran 2011, ss.932-938

Examination of Cone Angle and Spray Profile on Emissions of a Heavy Duty CI Engine and Geometrical Improvements

Tenth International Congress Of Fluid Dynamics (ICFD), Ain Soukhna, Red Sea, 16 - 19 Aralık 2010

Bir Rüzgar Türbini İçin Tasarım Parametrelerinin Belirlenmesi 1 5 Aralık 2010 Bursa

8. Ulusal Temiz Enerji Sempozyumu ve Fuarı, Bursa, Türkiye, 1 - 05 Aralık 2010, ss.552-559

A CFD Study and Geometrical Improvement on Heavy Duty Diesel Engine for Ultra Low Emissions

ASME 2010 International Mechanical Engineering Congress and Exposition, Vancouver, British Columbia, Canada, Amerika Birleşik Devletleri, 12 - 18 Kasım 2010, ss.1011-1021

Numerical Study on a Heavy Duty CI Engine to Achieve Ultra Low Emissions

ASME 2010 Internal Combustion Engine Division Fall Technical Conference, San Antonio, Texas, USA, 12 - 15 Eylül 2010, ss.319-328

A CFD Study on Heavy Duty DI Diesel Engine to Achieve Ultra Low Emissions

ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis, Volume 3, Istanbul, Turkey, Türkiye, 12 - 14 Temmuz 2010, ss.183-194 identifier

Injection Parameters and Geometrical Effects on The Emissions of a Heavy Duty CI Engine

11th International Combustion Symposium, Sarajevo, Bosna-Hersek, 24 - 27 Haziran 2010

Effects of the Injection Parameters on the Emissions of a Heavy Duty Diesel Engine

ASME 2009 International Mechanical Engineering Congress and Exposition, Lake Buena Vista, Florida, USA, Amerika Birleşik Devletleri, 13 - 19 Aralık 2009, cilt.3, ss.351-360 identifier

Injection Parameters Effects On The Emissions of a Heavy Duty CI Engine and Geometrical Improvements

FCE09 International Conference On Fuels And Combustion In Engines, İstanbul, Türkiye, 8 - 09 Ekim 2009, ss.141-150

Combustion Simulation of A Heavy Duty Diesel Engine

17. Ulusal Isı Bilimi ve Tekniği Kongresi, Sivas, Türkiye, 24 - 27 Haziran 2009

Atık Karıştırıcı Geometrisinin Biyogaz Üretimine Etkisi

7. Ulusal Temiz Enerji Sempozyumu, İstanbul, Türkiye, 17 - 21 Aralık 2008, ss.173-180

In Cylinder cold flow modeling with spray interaction in heavy duty DI CI engine

ICAT’08 International Conference on Automotive Technologies, İstanbul, Türkiye, 13 - 14 Kasım 2008, ss.127-137

Effect of The Geometry of The Digester Mixer on Biogas Production

10th International Combustion Symposium, Sakarya, Türkiye, 9 - 10 Ekim 2008, ss.22

In cylinder Flow Simulation of a Heavy Duty Diesel Engine

OTEKON08 Otomotiv Teknolojileri Kongresi, Bursa, Türkiye, 1 - 04 Haziran 2008

Discharge of Granular Materials From Hoppers With Various Exit Geometries

ASME 2007 International Mechanical Engineering Congress and Exposition, Seattle, Washington, USA, Amerika Birleşik Devletleri, 11 - 15 Kasım 2007, cilt.8, ss.1421-1426

Investigation of the choking condition of rapid coal granular flow

8. Uluslararası Yanma Sempozyumu, Ankara, Türkiye, 8 - 09 Eylül 2004, cilt.566

Simulation of cold flow in a model gas turbine combustion chamber

OTEKON04 Otomotiv Teknolojileri Kongresi, Bursa, Türkiye, 21 - 23 Haziran 2004, ss.463-471

Orman sabit gözetleme noktalarının enerji gereksinimleri için öneriler

6. Uluslararası tarımsal mekanizasyon ve enerji kongresi, Ankara, Türkiye, 2 - 06 Eylül 1996

Orman yangınlarından korunmada rüzgâr enerjisi uygulamalı sabit gözetleme noktaları

I. Uluslararası yangın ve güvenlik konferansı, İstanbul, Türkiye, 20 - 21 Mayıs 1996, cilt.182

Kitap & Kitap Bölümleri