Prof. Dr. AYKUT KENTLİ

Yayın Ağı

Makaleler 43

1. Microstructure development and mechanical behaviour of pure copper processed by the novel TWO-CAP procedure

KAYA H., UÇAR M., Ş Ahbaz M., KENTLİ A., Özbeyaz K., ÖĞÜT S.

Materialpruefung/Materials Testing , cilt.65, sa.8, ss.1209-1221, 2023 (SCI-Expanded)

2. Mechanical property improvement of a AA6082 alloy by the TV-CAP process as a novel SPD method

KAYA H., Özbeyaz K., KENTLİ A.

Materialpruefung/Materials Testing , cilt.65, sa.2, ss.244-257, 2023 (SCI-Expanded)

3. Novel SPD Method: Twisted Variable Channel Angular Extrusion

ÖZBEYAZ K., KAYA H., KENTLİ A.

METALS AND MATERIALS INTERNATIONAL , cilt.28, sa.5, ss.1290-1305, 2022 (SCI-Expanded)

4. Comparison of the Effect of Equal Channel Angular Pressing, Expansion Equal Channel Angular Pressing, and Hybrid Equal Channel Angular Pressing on Mechanical Properties of AZ31 Mg Alloy

ÖĞÜT S., KAYA H., KENTLİ A.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.31, sa.4, ss.3341-3353, 2022 (SCI-Expanded)

5. Temperature variation depending on cutting conditions and its effects on thrust force in micro-drilling of CFRP laminates

Dogrusadik A., KENTLİ A., Bakkal M., Çakan M.

INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY , cilt.65, sa.2, ss.152-168, 2022 (SCI-Expanded)

6. Applying hybrid equal channel angular pressing (HECAP) to pure copper using optimized Exp.-ECAP die

ÖĞÜT S., KAYA H., KENTLİ A., UÇAR M.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.116, ss.3859-3876, 2021 (SCI-Expanded)

7. Optimization of tool design parameters for thread tapping process of Ti-6Al-4V

Dogrusadik A., Aycicek C., KENTLİ A.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING , cilt.235, sa.4, ss.870-878, 2021 (SCI-Expanded)

8. Performance of Novel TWO-CAP (Thin-Walled Open Channel Angular Pressing) Method on AA5083

Şahbaz M., KENTLİ A., KAYA H.

Metals and Materials International , cilt.27, ss.2430-2437, 2021 (SCI-Expanded)

9. INVESTIGATION OF STRAIN INHOMOGENEITy IN HExA-ECAP PROCESSED AA7075

ÖĞÜT S., KAYA H., KENTLİ A., ÖZBEYAZ K., Sahbaz M., UÇAR M.

ARCHIVES OF METALLURGY AND MATERIALS , cilt.66, sa.2, ss.431-436, 2021 (SCI-Expanded)

10. A novel design on polymeric material recycling technology

Tanriver K., DİLİBAL S., Sahin H., KENTLİ A.

ACTA SCIENTIARUM-TECHNOLOGY , cilt.43, 2021 (SCI-Expanded)

11. A new severe plastic deformation method: thin-walled open channel angular pressing (TWO-CAP)

Şahbaz M., KAYA H., KENTLİ A.

International Journal of Advanced Manufacturing Technology , cilt.106, ss.1487-1496, 2020 (SCI-Expanded)

12. Analytical and Numerical Analysis Comparison of Equal Channel Angular Pressing for Al5083 Alloy

ŞAHBAZ M., KAYA H., KENTLİ A., UÇAR M., ÖĞÜT S., ÖZBEYAZ K.

Advanced Science, Engineering and Medicine , cilt.11, sa.11, ss.1100-1103, 2019 (Hakemli Dergi)

13. Effect of support plates on the micro-drilled hole form quality in CFRP laminates

Dogrusadik A., KENTLİ A.

MATERIALS TESTING , cilt.61, sa.5, ss.467-476, 2019 (SCI-Expanded)

14. Mechanical properties and electrical conductivity performance of ECAP processed AA2024 alloy

ÖZBEYAZ K., Kaya H., KENTLİ A., Sahbaz M., ÖĞÜT S.

INDIAN JOURNAL OF CHEMICAL TECHNOLOGY , cilt.26, sa.3, ss.266-269, 2019 (SCI-Expanded)

15. Experimental Comparison of Al5083 Alloy Subjected to Annealing and Equal-Channel Angular Pressing

ŞAHBAZ M., KAYA H., KENTLİ A., UÇAR M., ÖĞÜT S., ÖZBEYAZ K.

International Journal of Computational and Experimental Science , cilt.5, sa.1, ss.52-55, 2019 (Hakemli Dergi)

16. Experimental investigation of support plates' influences on tool wear in micro-drilling of CFRP laminates

Dogrusadik A., KENTLİ A.

JOURNAL OF MANUFACTURING PROCESSES , cilt.38, ss.214-222, 2019 (SCI-Expanded)

17. THERMAL ANALYSIS AND OPTIMIZATION OF HIGH POWER LED ARMATURE

Sahbaz M., KENTLİ A., KÖTEN H.

THERMAL SCIENCE , cilt.23, sa.2, ss.637-646, 2019 (SCI-Expanded) Sürdürülebilir Kalkınma

18. OPTIMIZATION OF SURFACE ROUGHNESS VALUES FOR EDM PROCESS USING A HYBRID METHOD OF ANFIS AND GA

KENTLİ A.

International Kournal of Scientific Research Engineering Technology , cilt.7, sa.12, ss.869-872, 2018 (Hakemli Dergi)

19. SELECTING OF BEST FORGING PRESS LINES CONSIDERING POSTURES BASED ON PRODUCTION PROCESS AND MAINTENANCE BY USING VIKOR METHOD

KENTLİ A., Keskin İ., Company K. F. S.

International Journal of Scientific Research Engineering Technology , cilt.6, sa.11, ss.1095-1100, 2017 (Hakemli Dergi)

20. Comparative assessment of support plates' influences on delamination damage in micro-drilling of CFRP laminates

Dogrusadik A., Kentli A.

COMPOSITE STRUCTURES , cilt.173, ss.156-167, 2017 (SCI-Expanded)

21. Numerically Investigating Effects of Channel Angle Friction and Ram Velocity on Strain Homogeneity in ECAP

ÖĞÜT S., KENTLİ A.

International Journal of Scientific Research Engineering & Technology , cilt.5, sa.12, ss.594-597, 2016 (Hakemli Dergi)

22. Comparison of Workpiece Geometry nnd Its Effects on ECAP Process By FEA

ŞAHBAZ M., KENTLİ A.

International Journal of Scientific Research Engineering & Technology , cilt.5, sa.12, ss.604-608, 2016 (Hakemli Dergi)

23. Influence of injection molding parameters on electrical resistivity of carbon nanotube reinforced polycarbonate

Donmez S., KENTLİ A.

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS , cilt.23, sa.2, ss.135-144, 2016 (SCI-Expanded)

24. Cadde Tipi Led Armatürün Isı Yayıcısında SEY ve YSA Modeli Kullanılarak Sıcaklık Tahmini Yapılması

ŞAHBAZ M., ÖĞÜT S., KENTLİ A.

Marmara Fen Bilimleri Dergisi , cilt.28, sa.2, ss.59-65, 2016 (Hakemli Dergi)

25. RADIAL BASIS AND LVQ NEURAL NETWORK ALGORITHM FOR REAL TIME FAULT DIAGNOSIS OF BOTTLE FILLING PLANT

Demetgul M., Yazicioglu O., KENTLİ A.

TEHNICKI VJESNIK-TECHNICAL GAZETTE , cilt.21, sa.4, ss.689-695, 2014 (SCI-Expanded)

26. Application of Different Algorithms to Optimal Design of Canal Sections

Kentli A., Mercan O.

JOURNAL OF APPLIED RESEARCH AND TECHNOLOGY , cilt.12, sa.4, ss.762-768, 2014 (SCI-Expanded)

27. OPTIMISATION OF HYDROSTATIC THRUST BEARING USING SEQUENTIAL QUADRATIC PROGRAMMING

Kentli A., Sahbaz M.

OXIDATION COMMUNICATIONS , cilt.37, sa.4, ss.1144-1152, 2014 (SCI-Expanded)

28. THE PREDICTION OF SURFACE TEMPERATURE IN DRILLING OF Ti6Al4V

Isik B., Kentli A.

ARCHIVES OF METALLURGY AND MATERIALS , cilt.59, sa.2, ss.467-471, 2014 (SCI-Expanded)

29. MINIMIZING MACHINE CHANGEOVER TIME IN PRODUCT LINE IN AN APPAREL INDUSTRY

KENTLİ A., Dal V., ALKAYA A. F.

TEKSTIL VE KONFEKSIYON , cilt.23, sa.2, ss.159-167, 2013 (SCI-Expanded)

30. Otomobil Endüstrisinde Kullanılan Baskı Makinaları Seçim Kriterlerinin ve Önem Derecelerinin Belirlenmesi

Kentli A., Uçak G.

Marmara Fen Bilimleri Dergisi , cilt.25, sa.2, ss.65-74, 2013 (Hakemli Dergi)

31. Improving Sound Absorption Property of Polyurethane Foams by Adding Tea-Leaf Fibers

EKİCİ B., KENTLİ A., KÜÇÜK H.

ARCHIVES OF ACOUSTICS , cilt.37, sa.4, ss.515-520, 2012 (SCI-Expanded)

32. Experimental Investigation and Prediction of Mechanical Properties of Friction Stir Welded Aluminium Metal Matrix Composite Plates

BOZKURT Y., KENTLİ A., Uzun H., SALMAN S.

MATERIALS SCIENCE-MEDZIAGOTYRA , cilt.18, sa.4, ss.336-340, 2012 (SCI-Expanded)

33. Robust Multiobjective Optimization of Cutting Parameters in Face Milling

Aykut S., KENTLİ A., GÜLMEZ S., Yazicioglu O.

ACTA POLYTECHNICA HUNGARICA , cilt.9, sa.4, ss.85-100, 2012 (SCI-Expanded)

34. Survey on Design of Truss Structures by Using Fuzzy Optimization Methods

KENTLİ A.

FUZZY LOGIC - CONTROLS, CONCEPTS, THEORIES AND APPLICATIONS , ss.393-416, 2012 (SCI-Expanded)

35. Studies on fuzzy decision making in Turkish Universities An overview

KENTLİ A.

Marmara Üniversitesi Fen Bilimleri Dergisi , cilt.23, sa.4, ss.140-159, 2011 (Hakemli Dergi)

36. Experimental study on peck drilling of GFRP and prediction of drilling-induced damage using ANN

KENTLİ A.

Scientific Research and Essays , cilt.6, sa.7, ss.1546-1554, 2011 (SCI-Expanded)

37. Studies on fuzzy logic control of electrical machines in turkish universities: An overview

KENTLİ A.

Mathematical and Computational Applications , cilt.16, sa.1, ss.236-247, 2011 (SCI-Expanded)

38. A satisfaction function and distance measure based multi-criteria robot selection procedure

KENTLİ A., Kar A. K.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH , cilt.49, sa.19, ss.5821-5832, 2011 (SCI-Expanded)

39. Optimization of WEDM Process Parameters of gamma-TiAl Alloy Using SVM Method

Donmez S., KENTLİ A.

TECHNICS TECHNOLOGIES EDUCATION MANAGEMENT-TTEM , cilt.6, sa.4, ss.1225-1234, 2011 (SCI-Expanded)

40. A mathematical model for condensation of bubbles injected through an orifice into subcooled water

Buğutekin A., Yılmaz M., Kentli A., Isıkan M. O.

Energy Education Science And Technology Part A-Energy Science And Research , cilt.24, ss.151-171, 2010 (SCI-Expanded)

41. Multicriteria optimization of cutting parameters in turning of UD-GFRP materials considering sensitivity

Isik B., Kentli A.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.44, ss.1144-1153, 2009 (SCI-Expanded)

42. Deterministic Approach to Path Optimization Problem

KENTLİ A., ALKAYA A. F.

Ozean Journal of Applied Sciences , cilt.2, sa.2, ss.149-157, 2009 (Hakemli Dergi)

43. Experimental observation of tool wear, cutting forces and chip morphology in face milling ofcobalt based super-alloy with physical vapour deposition coated and uncoated tool

Aykut S., Bagci E., Kentli A., Yazicioglu O.

MATERIALS & DESIGN , cilt.28, sa.6, ss.1880-1888, 2007 (SCI-Expanded)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 31

1. Sonlu elemanlar yöntemi ile Ekap işleminde sürtünme katsayısı, sıcaklık ve mesh sayısının etkilerinin incelenmesi ve farklı malzemeler ile kıyaslanması

ÖZBEYAZ K., KENTLİ A., KAYA H.

IMASCON, Uluslararası Marmara, Fen ve Sosyal Bilimler Kongresi, Kocaeli, Türkiye, 26 - 28 Nisan 2019, (Tam Metin Bildiri)

2. Ekap ile işlenmiş AA6082 Alaşımının Sertlik, Aşınma Direnci ve Mikroyapısının İncelenmesi

ÖZBEYAZ K., KAYA H., KENTLİ A.

IMASCON, Uluslararası Marmara, Fen ve Sosyal Bilimler Kongresi, Kocaeli, Türkiye, 26 - 28 Nisan 2019, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

3. Hekza-Ekap prosesine tabi tutulmuş saf bakırda gerinim dağılımının incelenmesi

ÖĞÜT S., KAYA H., KENTLİ A.

IMASCON, Uluslararası Marmara, Fen ve Sosyal Bilimler Kongresi, Kocaeli, Türkiye, 26 - 28 Nisan 2019, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

4. Investigating the Effects of the Corner Angle on the Equal Channel Angular Pressing Process

ŞAHBAZ M., KENTLİ A., KAYA H.

3rd International Conference on Advances in Mechanical Engineering: ICAME 2017, İstanbul, Türkiye, 19 - 21 Aralık 2017, cilt.1, ss.826-832, (Tam Metin Bildiri)

5. Analytical and Numerical Analysis Comparison of ECAP for Al5083 Alloy

ŞAHBAZ M., KAYA H., KENTLİ A., UÇAR M., ÖĞÜT S., ÖZBEYAZ K.

4th International Conference on Computational and Experimental Science and Engineering (ICCESEN 2017), Antalya, Türkiye, 4 - 08 Ekim 2017, ss.390, (Özet Bildiri)

6. Mechanical Properties and Electrical Conductivity Performance of ECAP Processed Al2024 Alloy

ÖZBEYAZ K., KAYA H., KENTLİ A., ŞAHBAZ M., ÖĞÜT S.

4th International Conference on Computational and Experimental Science and Engineering (ICCESEN 2017), Antalya, Türkiye, 4 - 08 Ekim 2017, ss.594, (Özet Bildiri)

7. Investigation on Effects of ECAE on Microstructure, Hardness and Electrical Conductivity of Al 7075 Alloy”, Serkan Öğüt, Hasan Kaya, Aykut Kentli, Kerim Özbeyaz, Mehmet Şahbaz,

ÖĞÜT S., KAYA H., KENTLİ A., ÖZBEYAZ K., ŞAHBAZ M.

4th International Conference on Computational and Experimental Science and Engineering (ICCESEN 2017), Antalya, Türkiye, 4 - 08 Ekim 2017, ss.602, (Özet Bildiri)

8. Studies on Twist Equal Channel Angular Process in Recent Years

ÖZBEYAZ K., KAYA H., KENTLİ A., ŞAHBAZ M., ÖĞÜT S.

4th International Conference on Computational and Experimental Science and Engineering (ICCESEN 2017), Antalya, Türkiye, 4 - 08 Ekim 2017, ss.632, (Özet Bildiri)

9. An Experimental Comparison of Annealed ECAPed Al5083 Alloy

ŞAHBAZ M., KAYA H., KENTLİ A., UÇAR M., ÖĞÜT S., ÖZBEYAZ K.

An Experimental Comparison of Annealed ECAPed Al5083 Alloy, Antalya, Türkiye, 4 - 08 Ekim 2017, ss.601, (Özet Bildiri)

10. Investigation on Effects of ECAE on Microstructure, Hardness and Electrical Conductivity of Al 7075 Alloy

ÖĞÜT S., KAYA H., KENTLİ A., ÖZBEYAZ K., ŞAHBAZ M.

4th International Conference on Computational and Experimental Science and Engineering, Antalya, Türkiye, 4 - 08 Ekim 2017, ss.602, (Özet Bildiri)

11. Numerically Investigation of Hardness Distribution in ECAE Processed Al 7075 Alloy

ÖĞÜT S., KAYA H., KENTLİ A., ÖZBEYAZ K., ŞAHBAZ M.

4th International Conference on Computational and Experimental Science and Engineering (ICCESEN 2017), Antalya, Türkiye, 4 - 08 Ekim 2017, (Özet Bildiri)

12. EFFECTS of MESH, FRICTION COEFFICIENT and TEMPERATURE on FINITE ELEMENT ANALYSIS of ECAP

ÖZBEYAZ K., KAYA H., KENTLİ A.

2. ULUSLARARASI MÜHENDİSLİK MİMARLIK VE TASARIM KONGRESİ, Kocaeli, Türkiye, 12 - 13 Mayıs 2017, ss.791-792, (Özet Bildiri)

13. Using a Hybrid Optimization System of SA ANN and AHP to Find Optimum Parameters on Drilling Process For CFRP

ÖĞÜT S., KENTLİ A.

16th International Materials Symposium, 12 - 14 Ekim 2016, cilt.1, ss.1794-1800, (Tam Metin Bildiri)

14. Optimization of EDM Process Using GA ANN and Data Fusion

ÖĞÜT S., KENTLİ A.

16th International Materials Symposium, 12 - 14 Ekim 2016, cilt.1, ss.1214-1220, (Tam Metin Bildiri)

15. Finding the Best Passenger Transport by Using MCDM Techniques

ÖZBEYAZ K., KENTLİ A.

1st International Conference on Engeneering Technology and Applied Sciences, 21 - 22 Nisan 2016, ss.1679-1682, (Tam Metin Bildiri)

16. An Application of Analytical Hierarch Process on Numerical Analysis of Heat Transfer

ŞAHBAZ M., KENTLİ A.

2ND INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, 10 - 13 Mayıs 2016, cilt.1, ss.331-334, (Tam Metin Bildiri)

17. Material Selection for Insulation of Buildings by Multi Criteria Decision Making Methods

ŞAHBAZ M., KENTLİ A., Eren A., Bilik C.

2ND INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, 10 - 13 Mayıs 2016, cilt.1, ss.335-339, (Tam Metin Bildiri)

18. LATHE SELECTION USING ANALYTIC HIERARCHY PROCESS AND INFORMATION AXIOM

KENTLİ A., Akbas S.

CBU International Conference on Innovations in Science and Education (CBUIC), Prague, Çek Cumhuriyeti, 23 - 25 Mart 2016, ss.852-856, (Tam Metin Bildiri)

19. EXPERIMENTAL AND ANALYTICAL INVESTIGATION ON EFFECT OF STATOR WINDING TYPE TO EQUIVALENT CIRCUIT PARAMETERS OF INDUCTION MOTORS

Kentli F., KENTLİ A.

CBU International Conference on Innovations in Science and Education (CBUIC), Prague, Çek Cumhuriyeti, 23 - 25 Mart 2016, ss.820-825, (Tam Metin Bildiri)

20. DETERMINING THE FACTORS AFFECTING THE STUDYING STRATEGY OF ENGINEERING STUDENTS USING TEXTBOOK

Kentli F., KENTLİ A.

7th International Conference of Education, Research and Innovation (ICERI), Sevilla, İspanya, 17 - 19 Kasım 2014, ss.1321-1324, (Tam Metin Bildiri)

21. CURRICULUM COMPARISON OF ENGINEERING FACULTY, TECHNOLOGY FACULTY AND TECHNICAL EDUCATION FACULTY: CASE STUDY OF MECHANICAL AND ELECTRICAL ENGINEERING

Kentli F., KENTLİ A., Kentli F. D.

7th International Conference of Education, Research and Innovation (ICERI), Sevilla, İspanya, 17 - 19 Kasım 2014, ss.1325-1335, (Tam Metin Bildiri)

22. Modelling and thermal analysis of high power LED armature Türkiye

Şahbaz M., Kentli A., Yılmaz M., Köten H., Yükselentürk Y.

International Symposium on Computing in Science and Engineering, Aydın, Türkiye, 24 - 25 Ekim 2013, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

23. Using Novel Methodology in Finding Optimum Truss Structure

ÖĞÜT S., KENTLİ A.

Numerical Computations: Theory and Algorithms, İtalya, 17 - 23 Haziran 2013, (Özet Bildiri)

24. Using a Novel Methodology in Finding the Optimum Truss Structure

ÖĞÜT S., KENTLİ A.

Numerical Computations: Theory and Algorithms, 17 - 23 Haziran 2013, ss.105, (Özet Bildiri)

25. PREDICTION OF SURFACE ROUGHNESS VALUES FOR MILLING OF AL1050

ÖZBEYAZ K., KENTLİ A.

APMAS 2013 International Advances in Applied Physics and Materials Science Congress Exhibition, Antalya, Türkiye, 24 - 28 Nisan 2013, (Tam Metin Bildiri)