Yayınlar & Eserler

Yayın Ağı
Makaleler 26
Tümü (26)
SCI-E, SSCI, AHCI (16)
SCI-E, SSCI, AHCI, ESCI (16)
Scopus (17)
TRDizin (6)
Diğer Yayınlar (5)

1. Parametric Design of Vehicle Electrified Powertrain with Two-Member Transmotor-Flywheel

DEMİR U., Ehsani M., DEMİR P., AKPOLAT A. N., Anvari-Moghaddam A.
Iranian Journal of Science and Technology - Transactions of Electrical Engineering , cilt.49, sa.4, ss.1545-1559, 2025 (SCI-Expanded, Scopus) identifier

2. Fırçasız Doğru Akım Motorunda Mıknatıs Türü ve Oluk Sayısı Değişiminin Tork Dalgalanması Üzerindeki Etkisinin İncelenmesi

tosun ö., serteller n. f. o., demir u., Gecer B.
International journal of advances in engineering and pure sciences (Online) , cilt.37, sa.3, ss.281-292, 2025 (TRDizin) identifier

3. Comparative Analysis of Ideal Energy Requirements in EV Powertrains

DEMİR U., Ehsani M., DEMİR P., AKPOLAT A. N.
Iranian Journal of Science and Technology - Transactions of Electrical Engineering , cilt.49, sa.3, ss.1337-1350, 2025 (SCI-Expanded) identifier

4. Model Reference-Based Neural Controller for Transmission Line Inspection Robot

Karagöz Z., Ekren N., Demir U., Baba A. F., Şahin M.
JOURNAL OF FIELD ROBOTICS , cilt.1, sa.1, ss.1-19, 2024 (SCI-Expanded)

5. Intelligent Design Optimization for Traction and Steering Motors of an Autonomous Electric Shuttle under Driving Scenarios

DEMİR U., Ehsani M., DEMİR P., Akıncı T. Ç.
Electronics (Switzerland) , cilt.13, sa.3, 2024 (SCI-Expanded) Creative Commons License identifier

6. Multi System Level Driving Scenarious Based Topology Optimization of Bracket Design for 2 DoF Vehicle Simulator

Demirci B., demir u., AKGUN G., YILDIRIM A., Aküner C.
International Journal of Automotive Science and Technology , cilt.7, sa.3, ss.248-258, 2023 (Scopus) Creative Commons License identifier identifier

7. Feature Extraction and NN-based Enhanced Test Maneuver Deployment for 2 DoF Vehicle Simulator

DEMİR U., AKGÜN G., AKÜNER M. C., Demirci B., AKGÜN Ö., Akıncı T. Ç.
IEEE Access , cilt.11, ss.36218-36232, 2023 (SCI-Expanded) Creative Commons License identifier

8. An Innovative Approach to Electrical Motor Geometry Generation using Machine Learning and Image Processing Techniques

DEMİR U., AKGÜN G., AKÜNER M. C., Pourkarimi M., AKGÜN Ö., Akıncı T. Ç.
IEEE Access , cilt.11, ss.48651-48666, 2023 (SCI-Expanded) Sürdürülebilir Kalkınma identifier

9. Comparative Design Improvement of the Growing Rod for the Scoliosis Treatment Considering the Mechanical Complications

Demir U., Akgün G., Kocaoğlu S., Okay E., Heydar A., Akdoğan E., et al.
IEEE Access , cilt.11, ss.40107-40120, 2023 (SCI-Expanded) identifier

10. Investigation on Different Driving Cycle and Scenarios Considering the Autonomous Electric Vehicles

DEMİR U., KAMIŞ KOCABIÇAK Z.
International Journal of Automotive Science and Technology , cilt.6, sa.4, ss.364-378, 2022 (Hakemli Dergi)

11. FFT Analysis and Motion Classification of EMG Signals

AKGÜN G., DEMİR U., YILDIRIM A.
Computer Science , ss.130-136, 2022 (Hakemli Dergi)

12. IM to IPM design transformation using neural network and DoE approach considering the efficiency and range extension of an electric vehicle

DEMİR U.
ELECTRICAL ENGINEERING , cilt.104, sa.2, ss.1141-1152, 2022 (SCI-Expanded) identifier identifier

13. Improvement of the power to weight ratio for an induction traction motor using design of experiment on neural network

DEMİR U.
Electrical Engineering , cilt.103, ss.2267-2284, 2021 (SCI-Expanded) identifier identifier

14. Design and Prototyping of Powered Sliding Door for Light Commercial Vehicles

DEMİR U.
International Journal of Automotive Science and Technology , cilt.5, sa.2, ss.106-115, 2021 (Hakemli Dergi) identifier

15. Performance assessments of the material for the traction motor cores of an electric racing kart

DEMİR U., Kocabicak Z. K.
MATERIALS TESTING , cilt.63, sa.6, ss.519-528, 2021 (SCI-Expanded) identifier identifier

16. Design and optimization of an electromechanical actuator for the latch of a foldable vehicle seat

Kamis Z., Demir U.
MATERIALS TESTING , cilt.62, sa.7, ss.749-755, 2020 (SCI-Expanded) identifier identifier

17. Taşıtlarda Katlanabilir Koltuk Sistemleri için Selonoid Aktüatör Tasarım ve Analizi

DEMİR U.
International Journal of Advances in Engineering and Pure Sciences , cilt.32, sa.2, ss.158-171, 2020 (Hakemli Dergi)

18. Design and analysis of radiaxial induction motor

Demir U., Aküner M. C.
Electrical Engineering , cilt.100, sa.4, ss.2361-2371, 2018 (SCI-Expanded) Creative Commons License identifier identifier

19. Analysis of In-Wheel Asynchronous Motor with Conical Geometry for Electric Vehicle

DEMİR U., AKÜNER M. C.
Journal of New Results in Science , cilt.7, sa.1, ss.29-37, 2018 (Hakemli Dergi)

20. Analysis of In-Wheel Asynchronous Motor with Conical Geometry for Electric Vehicle

Demir U., Aküner M. C.
Journal of New Results in Science , cilt.7, sa.1, ss.29-37, 2018 (Hakemli Dergi) Creative Commons License

21. Design and optimization of in-wheel asynchronous motor for electric vehicle

Demir U., Akuner M. C.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.33, sa.4, ss.1517-1530, 2018 (SCI-Expanded) Creative Commons License identifier identifier

22. Calculation of Performance Characteristic of In-Wheel Asynchronous Motor for Electric Vehicle

Demir U., Aküner M. C.
Gaziosmanpasa Journal of Scientific Research , cilt.6, ss.10-20, 2017 (Hakemli Dergi) Creative Commons License

23. Using taguchi method in defining critical rotor pole data of LSPMSM considering the power factor and efficiency Definiranje kritičnih podataka pola rotora LSPMSM-a s obzirom na faktor snage i učinkovitosti uporabomTaguchijeve metode

Demir U., Aküner M. C.
Tehnicki Vjesnik , cilt.24, sa.2, ss.347-353, 2017 (SCI-Expanded) Creative Commons License identifier identifier

24. Investigation on the Output Signal of Rotational Speed Sensor for Different Flux Surfaces between Gear Wheel and Sensor

Demir U., Demir P., Aküner M. C.
Applied Mechanics and Materials , cilt.850, ss.172-178, 2016 (Hakemli Dergi)

25. Human impedance parameter estimation using artificial neural network for modelling physiotherapist motion

DEMİR U., Kocaoglu S., AKDOĞAN E.
BIOCYBERNETICS AND BIOMEDICAL ENGINEERING , cilt.36, sa.2, ss.318-326, 2016 (SCI-Expanded) identifier identifier

26. A new approach in application and design of toroidal axial-flux permanent magnet open-slotted NN type (TAFPMOS-NN) motor Novi pristup u primjeni i projektiranju NN tipa motora otvorenih utora s permanentnim magnetima prstenastog aksijalnog toka (TAFPMOS-NN)

Hüner E., Aküner M. C., Demir U.
Tehnicki Vjesnik , cilt.22, sa.5, ss.1193-1198, 2015 (SCI-Expanded) Creative Commons License identifier identifier
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 14

1. Design of Flexible Charging Simulator for Electric Vehicles

ALACA E., AKPOLAT A. N., TOPCAN H., KALAY M. Ş., DEMİR U.
IEEE Global Energy Conference 2024, Batman, Türkiye, 4 - 06 Aralık 2024, ss.49-54, (Tam Metin Bildiri) identifier

2. Intelligent Adaptive Control of Magnetically Growing Rod-Like System

Cokatar S., YILDIRIM A., AKGÜN G., AKDOĞAN E., DEMİR U.
3rd International Conference on Power, Control and Computing Technologies, ICPC2T 2024, Raipur, Hindistan, 18 - 20 Ocak 2024, ss.135-138, (Tam Metin Bildiri) identifier

3. Neural Network and IoT-based Test Maneuver Deployment for 2 DoF Vehicle Simulator

DEMİRCİ B., DEMİR U., AKGÜN G., YILDIRIM A., AKÜNER M. C., ÖZKAN M.
2022 International Conference on Artificial Intelligence of Things (ICAIoT), 29 Aralık 2022, cilt.11, (Tam Metin Bildiri) identifier

4. Investigation of UWB-IMU Sensor Fusion for Indoor Navigation with DoE

Durmus S., DEMİR U., AKGÜN G., YILDIRIM A.
2023 Innovations in Intelligent Systems and Applications Conference, ASYU 2023, Sivas, Türkiye, 11 - 13 Ekim 2023, (Tam Metin Bildiri) identifier

5. EMG Sinyallerinin Derin Öğrenme ile Hareket Sınıflandırması

Akgün G., Yıldırım A., Demir U., Kaplanoğlu E.
TOK2022 Otomatik Kontrol Ulusal Toplantısı, Elazığ, Türkiye, 15 - 18 Eylül 2022, Elazığ, Türkiye, 15 - 18 Eylül 2022, (Yayınlanmadı) Creative Commons License

6. Neural Network Approach for E-Motor Development

Pourkarimi M., Demir U., Aküner M. C.
2022 8th International Conference on Control, Decision and Information Technologies (CoDIT), İstanbul, Türkiye, 17 Mayıs 2022, cilt.1, ss.1091-1095, (Tam Metin Bildiri) identifier identifier

7. Comparision Between Two Different Types of Solenoids Designed for Automotive Latch Application

DEMİR U., KAMIŞ KOCABIÇAK Z.
OTEKON2020 - 10th International Automotive Technologies Congress, Bursa, Türkiye, 6 - 07 Eylül 2021, ss.702-706, (Tam Metin Bildiri)

8. Automatic closing of automotive glove box using shape memory spring

DEMİR U.
ISASTECH2019-1st Internatıonal Symposıum On Automotıve Scıence And Technology, Ankara, Türkiye, 5 - 06 Eylül 2019, (Tam Metin Bildiri)

9. A releasing mechanism for the automotive seat latch using shape memory spring

DEMİR U.
ISASTECH2019-1st Internatıonal Symposıum On Automotıve Scıence And Technology, Ankara, Türkiye, 5 - 06 Eylül 2019, (Tam Metin Bildiri)

10. Comparison between two conical induction machines designed for an electric vehicle application

Demir U., Roggia S., Aküner M. C.
11th IEEE International Electric Machines and Drives Conference, IEMDC 2019, California, Amerika Birleşik Devletleri, 12 - 15 Mayıs 2019, ss.1032-1037, (Tam Metin Bildiri) Creative Commons License identifier identifier

11. A New Approach for In-Wheel Asynchronous Motor of Electric Vehicle”

DEMİR U., AKÜNER M. C.
ISMSIT2017-1st International Symposium on Multidisciplinary Studies and Innovative Technologies, Tokat, Türkiye, 2 - 04 Kasım 2017, (Özet Bildiri)

12. Investigation and Improvement of InWheel Asynchronous Motor for An Electrical Vehicle Considering Geometric Dimensioning

DEMİR U., AKÜNER M. C.
IATS2017-8th International Advanced Technology Symposium, Elazığ, Türkiye, 19 - 22 Ekim 2017, (Tam Metin Bildiri)

13. Investigation of the immunity to voltage over stress requirement for the electrical seat latch actuator

Demir U., Aküner M. C.
4th International Conference on Electrical and Electronics Engineering, ICEEE 2017, Ankara, Türkiye, 8 - 10 Nisan 2017, ss.187-193, (Tam Metin Bildiri) Sürdürülebilir Kalkınma identifier identifier

14. Otomotiv Ateşleme Bobinlerinde Hava Aralığı Değişiminin Ateşleme Performansına Etkisinin Sonlu Elemanlar Analizi ile İncelenmesi

DEMİR U., AKÜNER M. C.
EEB2016-Elektrik-Elektronik ve Bilgisayar Sempozyumu, Tokat, Türkiye, 11 - 13 Mayıs 2016, (Tam Metin Bildiri)
Metrikler

Yayın

40

Yayın (WoS)

19

Yayın (Scopus)

24

H-İndeks (WoS)

7

Atıf (Scopus)

139

H-İndeks (Scopus)

9

Atıf (Scholar)

221

H-İndeks (Scholar)

10

Atıf (TrDizin)

2

H-İndeks (TrDizin)

1

Atıf (Diğer Toplam)

7

Toplam Atıf Sayısı

63

Proje

22

Fikri Mülkiyet

4

Tez Danışmanlığı

4

Açık Erişim

11
BM Sürdürülebilir Kalkınma Amaçları