SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler
Experimentation and analysis of powder injection molded Ti10Nb10Zr alloy: a promising candidate for electrochemical and biomedical application
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
, cilt.8, sa.6, ss.5233-5245, 2019 (SCI-Expanded)
Investigation of wear behavior of Ti-6Al-4V/CNT composites reinforced with carbon nanotubes
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY
, cilt.34, ss.1442-1449, 2019 (SCI-Expanded)
Ni-625 Superalloy Foam Processed by Powder Space-Holder Technique
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
, cilt.22, sa.12, ss.3735-3741, 2013 (SCI-Expanded)
Diğer Dergilerde Yayınlanan Makaleler
Influence of Niobium additions on sintering behaviors and mechanical properties of injection molded 420 stainless steel powder
NANOMATERIALSSCIENCE ENGINEERING
, cilt.1, sa.1, ss.34-41, 2019 (Hakemli Dergi)
Bor İlavesinin Toz Metal D2 Takım Çeliğinin Mikroyapı ve Mekanik Özelliklerine Etkisi
Fırat Üniversitesi Mühendislik Bilimleri Dergisi
, cilt.29, sa.2, ss.87-96, 2017 (Hakemli Dergi)
Effect of Subsequent Aging on Wear Behaviour of SiCp Reinforced AA2124 Aluminum Metal Matrix Composite
Journal of Scientific and Engineering Research
, cilt.3, ss.34-40, 2016 (Hakemli Dergi)
Toz Metalurjisi Ürünü Fe Cu C ve Fe Cu Parçalarının İşlenebilirlik Özelliklerinin Delme Testi ile Belirlenmesi
Metal Dünyası
, cilt.1, sa.125, ss.91-94, 2003 (Hakemsiz Dergi)
Mekanik Alaşımlama ve Uygulama Alanları
Metal Dünyası
, cilt.124, sa.124, ss.85-88, 2003 (Hakemli Dergi)
Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar
Sıcak İzostatik Preslemenin Lazer-Toz Yatak Füzyon Tekniği ile Üretilmiş 17-4PH Paslanmaz Çelikler Üzerine Etkisi
2. uluslararası türk dünyası mühendislik ve fen bilimleri kongresi, 7 - 10 Kasım 2019
Eklemeli İmalat Teknolojileri ve Uygulamaları
2. uluslararası türk dünyası mühendislik ve fen bilimleri kongresi, 7 - 10 Kasım 2019
Powder injection molding of B4C-CrB2 composite based sandblast nozzles
AM-PM 2019, 23 - 26 Haziran 2019
Bronz Parçaların Seçici Lazer Ergitme (SLM) Metodu ile Üretilmesi: Mikroyapı ve Mekanik Özellikler
IMSMATEC-2019, 21 - 23 Haziran 2019
AISI-420 MARTENZİTİK PASLANMAZ ÇELİKLERİN TOZ ENJENSİYON KALIPLAMA METODU KULLANIKARAK ÜRETİLMESİ VE MİKROYAPI, MEKANİK VE KOROZYON ÖZELLİKLERİNİN İNCELENMESİ
imsmatec2019, Nevşehir, Türkiye, 21 - 23 Haziran 2019, cilt.1, sa.1, ss.1-7
Lazer-Toz Yatak Füzyon Tekniği ile Üretilmiş 17-4PH Paslanmaz Çeliklerin İncelenmesi
CIEA2018, 20 - 22 Eylül 2018
Investigation of the Corrosion Behavior of 420 Stainless Steel Processed by Laser-Powder Bed Fusion
powdermet2018, 18 - 20 Haziran 2018
Laser-Powder Bed Fusion of Bronze:Mechanical Properties
POWDERMET2018, 18 - 20 Haziran 2018
The Role of Powder Attributes in Laser-Powder Bed Fusion of 420 Stainless Steel
POWDERMET2018, 18 - 20 Haziran 2018
Influence of Zr addition on the corrosion behavior of biomedical PIM Ti-16Nb-(0, 5, 10) Zr alloys in SBF
Biomat2018, 12 - 16 Mart 2018
Biomedical Porous Ti-16Nb-10Zr-(0-15) Ta Alloys
Biomat2018, 12 - 16 Mart 2018
modelling of production parameters of B4C ZrO2 composites via artifical neural networks method
mathematical modelling 2017, 13 - 16 Aralık 2017
The Effect of Copper Addition On Mechanical and Corrosion Properties of AA 1055 Aluminium Alloys
IATS 2017, 19 - 22 Ekim 2017
Electrochemical Corrosion Behavior of Ti and Ti-16Nb Alloy for Implant Applications
IATS 2017, 19 - 22 Ekim 2017
investigation of rheological properties of cobalt based superalloy powder PIM feedstock
ICMTM2017, 24 - 25 Ekim 2017
Production of boron carbide based sandblasting nozzle by using low pressure powder injection molding method and modeling of production parameters via artificial neural network
International scientific congrees machines, technologies, materials, Varna, Bulgaristan, 13 - 16 Eylül 2017
Production of boron carbide based sandblasting nozzle by using low pressure powder injection molding method and modelling of production parameters via artifical neural network
international scientific congress machines, technologies, materials, 13 - 16 Eylül 2017
DEVELOPMENT OF tİ16NBxzR ALLOY FOR İMPLANT APPLİCATİONS
4. CENTRAL AND EASTERN EUROPEAN CONFERANCE ON THERMAL ANALYSİS AND CALORİMETER, 28 - 31 Ağustos 2017
Electrochemical Behavior of injection Molded Gas and Water Atomized 17-4PH Stainless Steel Powder
International Conference on Powder Metallurgy and Particulat Materials, 13 - 17 Haziran 2017
Bonive derived hydroxyapatite-sammarium oxide composites for biomedical applications
POWDERMET2017, 13 - 16 Haziran 2017
Karbon Nanotüp (CNT) Takviyeli Ti6Al4V bazlı kompozitlerinaşınma davranışlarının incelenmesi
II. Savunma Sanayi Sempozyumu, Kırıkkale, Türkiye, 6 - 08 Nisan 2017
Toz Enjeksiyon Kalıplama Yöntemi ile TiB2 ilaveli B4C Kompozitlerin Üretimi
2. uluslararası savunma sanayi sempozyumu, 6 - 08 Nisan 2017
Karbon nanotüpler ile (KNT) güçlendirilmiş titanyum (Ti6Al4V) metal matrisli kompozitlerin mekanik davranışlarının incelenmesi
2. uluslararası savunma sanayi sempozyumu, 6 - 08 Nisan 2017
yapay sinir ağları yöntemiyle değişik ilaveli B4C kompozitlerin yoğunluklarının tahmin performanslarının incelenmesi
2. uluslararası savunma sanayi sempozyumu, 6 - 08 Nisan 2017
DEVELOPİNG OF MECHANICAL BEHAVIOR OF PARTICULATE REINFORCED TITANIUM MATRIX COMPOSITE
“ISTANBUL INTERNATIONAL CONFERENCE ON PROGRES IN APPLIED SCIENCE 2017, İstanbul, Türkiye, 4 - 06 Ocak 2017
“Investigation of Ti6Al4V Powder Wetting behavior reinforced with Carbon Nanotubes
“ISTANBUL INTERNATIONAL CONFERENCE ON PROGRES IN APPLIED SCIENCE 2017”, İstanbul, Türkiye, 4 - 06 Ocak 2017
“İnvestigated Characterization and Mechanical Behavior Of Carbon Nanotubes Reinforced Aluminum Matrix Composite Materials”
“ISTANBUL INTERNATIONAL CONFERENCE ON PROGRES IN APPLIED SCIENCE 2017, İstanbul, Türkiye, 4 - 06 Ocak 2017
“DETERMİNATİON OF Ti6Al4V POWDER MATRİX TO BE REİNFORCED CARBON NANO TUBE (CNT) CHARECTERİSATİON OF POWDERS
“ISTANBUL INTERNATIONAL CONFERENCE ON PROGRES IN APPLIED SCIENCE 2017, İstanbul, Türkiye, 4 - 06 Ocak 2017
TOZ METALURJİSİ İLE ÜRETİLEN BİYOMEDİKAL Ti Nb ESASLI ALAŞIMLARDA NB İLAVESİNİN MİKROYAPI VE MEKANİK ÖZELLİKLERE ETKİSİ
16. Uluslararası Malzeme Sempozyumu, 12 - 14 Ekim 2016
Sintering Dissolution Process For Manufacturing Ni Based Superalloy Foams
WORLDPM2016, 9 - 13 Ekim 2016
Rheological Properties of Boron Carbide B4C Feedstock for Powder Injection Molding
ELECTAM2016, 22 - 24 Şubat 2016
BOR İLAVESİNİN D2 TAKIM ÇELİĞİNİN MİKROYAPI VE MEKANİK ÖZELLİKLERİNE ETKİSİ
IMSTEC2016, 6 - 08 Nisan 2016
Effect of Different Additions on Sintering Behavior of Injection Molded B4C Powder
ELECTAM2016, 22 - 24 Şubat 2016
Effect of Different Additions on Sintering Behaviour of Injection Molded B4C Powder
1st EuropeanLatin-American Conference of Theoretical and Applied Mechanics (ELECTAM), 22 - 24 Şubat 2016
Effect of Particle Size on Sintering Characteristics and Mechanical Properties of Injection Molded 316L Powder
The 3rd International Conference onKinematics, Mechanics of RigidBodies, and Materials 2015(MechKinematics 2015), Balvi, Letonya, 19 - 20 Aralık 2015
IN 718 SUPERALLOY FOAM PROCESSED BY POWDER SPACE HOLDERTECHNIQUE MICROSTRUCTURAL AND MECHANICALCHARACTERIZATION
The International Porous and Powder Materials Symposium and Exhibition, İzmir, Türkiye, 15 - 18 Eylül 2015
Enhancing the corrosion resistance and biocompability of injection molded 316L stainless steel for Bio applications
16th International Scientific Conress, CNIC 2015, 22 - 24 Haziran 2015
Sintering and mechanical properties of Titanium composites reinforced Nano Al2O3 Particles
2015 International Conference on Smart Manufacturing Technologies, 14 - 15 Haziran 2015
Enhancing the Corrosion Resistance and Biocompatibility of Injection Molded 316L Stainless Steel for Bio applications
16. International Scientific Congress CNIC 2015, 22 - 26 Haziran 2015
Sintering and Mechanical Properties of Titanium Composites Reinforced Nano Sized Al2O3 Particles
2015 International Conference on Smart Manufacturing Technologies (ICSMT 2015), st. petersburg, Rusya, 14 - 15 Haziran 2015
Effect of Zr Nb and Ti Additions on Injected Molded 316L Stainless Steel Microstructural Mechanical and Corrosion Resistance
International Conference on Nano and Materials Engineering (ICNME 2015), 2 - 03 Nisan 2015
Effect of Zr Nb and Ti Additions on Injection Molded 316L Stainless Steel Microstructural Mechanical Properties and Corrosion Resistance
International Conference on Nano and Materials Engineering (ICNME 2015), Phuket, Tayland, 2 - 03 Nisan 2015
Electrochemical Investigation of Corrosion Behaviour of Boron Doped Powder Metallurgy 316L Stainless Steels in acidic Media
JESTECH 15, Karabük, Türkiye, 10 Nisan 2013 - 13 Nisan 2012, ss.2
19 European Symposium on Polymer Spectroscopy
JESTECH(Engineering Science and Technology an International Journal)., Karabük, Türkiye, 12 - 15 Haziran 2012, ss.129-133
Nano ve Mikro Boyuttaki 5 ve 10 Al2O3 Partikül Takviyeli 316L Paslanmaz Çelik Malzemelerin Mekanik ve Mikroyapı Özellikleri
6th International Advanced Technologies Symposium, 16 - 18 Mayıs 2011
Sinterlenmiş D2 Takım Çeliklerine Katılan TiCN Miktarının Aşınma Davranışlarına Etkisi
11. International Materials Symposium, 19 - 21 Nisan 2006, ss.273-277
Bor Katkılı Demir Esaslı Toz Metal Parçaların Aşınma Davranışlarının İncelenmesi
I.International Vocational and Technical Education Technologies Congress, 5 - 09 Eylül 2005
Kitap & Kitap Bölümleri
Powder binder formulation and compound manufacture in metal injection molding (MIM)
Handbook of Metal Injection Molding - 2nd Edition - Elsevier, Donald Heaney, Editör, elsevier, NA, ss.5-70, 2018
METALOGRAFİ BİLİMİ NOBEL ANKARA
NOBEL, 2014
Metalografi Bilimi
Nobel yayın evi, 2004