Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Effects of layer thickness in laser-powder bed fusion of 420 stainless steel

Nath S. D., Gupta G., Kearns M., Gulsoy O., Atre S.
RAPID PROTOTYPING JOURNAL , cilt.26, sa.7, ss.1197-1208, 2020 (SCI-Expanded) identifier identifier

Investigation of Creep Behavior of CNT Reinforced Ti6Al4V Under Dynamic Loads

TOPCU İ., ÇETİNER B. N., GÜLLÜOĞLU A. N., Gulsoy O.
JOURNAL OF THE CHEMICAL SOCIETY OF PAKISTAN , cilt.42, sa.1, ss.70-80, 2020 (SCI-Expanded) identifier identifier

Experimentation and analysis of powder injection molded Ti10Nb10Zr alloy: a promising candidate for electrochemical and biomedical application

Yemisci I., MUTLU Ö., GÜLSOY N., Kunal K., Atre S., GÜLSOY H. Ö.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T , cilt.8, sa.6, ss.5233-5245, 2019 (SCI-Expanded) identifier identifier

Microstructures, properties, and applications of laser sintered 17-4PH stainless steel

Irrinki H., Nath S. D., Alhofors M., Stitzel J., Gulsoy O., Atre S. V.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY , cilt.102, sa.9, ss.5679-5690, 2019 (SCI-Expanded) identifier identifier

Effects of Nb and Mo on the microstructure and properties of 420 stainless steel processed by laser-powder bed fusion

Nath S. D., Clinning E., Gupta G., Wuelfrath-Poirier V., L'Espérance G., Gulsoy O., et al.
Additive Manufacturing , cilt.28, ss.682-691, 2019 (SCI-Expanded) identifier identifier

Novel hydroxyapatite/graphene oxide/collagen bioactive composite coating on Ti16Nb alloys by electrodeposition

Yilmaz E., Cakiroglu B., Gokce A., Findik F., GÜLSOY H. Ö., GÜLSOY N., et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS , cilt.101, ss.292-305, 2019 (SCI-Expanded) identifier identifier identifier

Influence of Zr addition on the corrosion behavior of biomedical PIM Ti-16Nb alloy in SBF

Yilmaz E., Gokce A., Findik F., GÜLSOY H. Ö.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH , cilt.110, sa.4, ss.379-381, 2019 (SCI-Expanded) identifier identifier

Biomedical porous Ti-16Nb-10Zr-(0-15)Ta alloys

Yilmaz E., Gokce A., Findik F., GÜLSOY H. Ö.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH , cilt.110, sa.4, ss.375-378, 2019 (SCI-Expanded) identifier identifier

Microstructure-property relationships of 420 stainless steel fabricated for by laser-powder bed fusion

Nath S. D., Irrinki H., Gupta G., Kearns M., Gulsoy O., Atre S.
POWDER TECHNOLOGY , cilt.343, ss.738-746, 2019 (SCI-Expanded) identifier identifier

Investigation of wear behavior of Ti-6Al-4V/CNT composites reinforced with carbon nanotubes

Topcu I., Güllüoğlu A. N., Bilici M. K., Gülsoy H. Ö.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.34, ss.1442-1449, 2019 (SCI-Expanded) Creative Commons License identifier identifier

Mechanical properties and electrochemical behavior of porous Ti-Nb biomaterials

YILMAZ E., GÖKÇE A., FINDIK F., GÜLSOY H. Ö., İYİBİLGİN O.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS , cilt.87, ss.59-67, 2018 (SCI-Expanded) identifier identifier identifier

Assessment of Ti-16Nb-xZr alloys produced via PIM for implant applications

YILMAZ E., GÖKÇE A., FINDIK F., GÜLSOY H. Ö.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY , cilt.134, sa.1, ss.7-14, 2018 (SCI-Expanded) identifier identifier

Powder Metallurgy Processing of Ti-Nb Based Biomedical Alloys

Yilmaz E., Gokce A., Findik F., Gulsoy H. O.
ACTA PHYSICA POLONICA A , cilt.134, sa.1, ss.278-280, 2018 (SCI-Expanded) identifier identifier

Characterization of biomedical Ti-16Nb-(0-4)Sn alloys produced by Powder Injection Molding

YILMAZ E., GÖKÇE A., FINDIK F., GÜLSOY H. Ö.
VACUUM , cilt.142, ss.164-174, 2017 (SCI-Expanded) identifier identifier

Ni-718 superalloy foam processed by powder space-holder technique: Microstructural and mechanical characterization

Timac G., Gulsoy H. O.
KOVOVE MATERIALY-METALLIC MATERIALS , cilt.55, sa.4, ss.273-278, 2017 (SCI-Expanded) identifier identifier

Production of porous Ti5Al2.5Fe alloy via pressureless spark plasma sintering

Yamanoglu R., Gulsoy N., Olevsky E. A., Gulsoy H. O.
JOURNAL OF ALLOYS AND COMPOUNDS , cilt.680, ss.654-658, 2016 (SCI-Expanded) identifier identifier

Powder injection molding of Stellite 6 powder: Sintering, microstructural and mechanical properties

GÜLSOY H. Ö., ÖZGÜN Ö., Bilketay S.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.651, ss.914-924, 2016 (SCI-Expanded) identifier identifier

Effect of Zr, Nb and Ti addition on injection molded 316L stainless steel for bio-applications: Mechanical, electrochemical and biocompatibility properties

Gülsoy H. Ö., Pazarlioglu S. S., Gülsoy N., Gundede B., Mutlu Ö.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS , cilt.51, ss.215-224, 2015 (SCI-Expanded) Creative Commons License identifier identifier identifier

The effect of aging treatment on the fracture toughness and impact strength of injection molded Ni-625 superalloy parts

ÖZGÜN Ö., YILMAZ R., GÜLSOY H. Ö., FINDIK F.
MATERIALS CHARACTERIZATION , cilt.108, ss.8-15, 2015 (SCI-Expanded) identifier identifier

Influence of TiC, TiN and TiC(N) additions on sintering and mechanical properties of injection moulded titanium based metal matrix composites

Gulsoy H. O., Gunay V., Baykara T.
POWDER METALLURGY , cilt.58, sa.1, ss.30-35, 2015 (SCI-Expanded) identifier

Particle morphology influence on mechanical and biocompatibility properties of injection molded Ti alloy powder

GÜLSOY H. Ö., GÜLSOY N., Calisici R.
BIO-MEDICAL MATERIALS AND ENGINEERING , cilt.24, sa.5, ss.1861-1873, 2014 (SCI-Expanded) identifier identifier identifier

Ni-625 Superalloy Foam Processed by Powder Space-Holder Technique

Unver I., GÜLSOY H. Ö., Aydemir B.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.22, sa.12, ss.3735-3741, 2013 (SCI-Expanded) identifier identifier

Microstructural and mechanical characterization of injection molded 718 superalloy powders

ÖZGÜN Ö., GÜLSOY H. Ö., YILMAZ R., FINDIK F.
JOURNAL OF ALLOYS AND COMPOUNDS , cilt.576, ss.140-153, 2013 (SCI-Expanded) identifier

Injection molding of nickel based 625 superalloy: Sintering, heat treatment, microstructure and mechanical properties

ÖZGÜN Ö., GÜLSOY H. Ö., YILMAZ R., FINDIK F.
JOURNAL OF ALLOYS AND COMPOUNDS , cilt.546, ss.192-207, 2013 (SCI-Expanded) identifier identifier

Microstructure and mechanical properties of injection moulded Nimonic-90 superalloy parts

Ozgun O., Gulsoy H. O., Findik F., Yilmaz R.
POWDER METALLURGY , cilt.55, sa.5, ss.405-414, 2012 (SCI-Expanded) identifier identifier

Injection Molding of Mechanical Alloyed Ti-Fe-Zr Powder

GÜLSOY H. Ö., Gunay V., Baykara T., German R. M.
MATERIALS TRANSACTIONS , cilt.53, sa.6, ss.1100-1105, 2012 (SCI-Expanded) identifier

Effect of boron addition on injection molded 316L stainless steel: Mechanical, corrosion properties and in vitro bioactivity

Bayraktaroglu E., GÜLSOY H. Ö., GÜLSOY N., Er O., KILIÇ H.
BIO-MEDICAL MATERIALS AND ENGINEERING , cilt.22, sa.6, ss.333-349, 2012 (SCI-Expanded) identifier identifier identifier

Injection molding of micro-porous titanium alloy with space holder technique

Engin G., Aydemir B., GÜLSOY H. Ö.
RARE METALS , cilt.30, sa.6, ss.565-571, 2011 (SCI-Expanded) identifier identifier

Sintering parameters and mechanical properties of injection moulded aluminium powder

Acar L., Gulsoy H. O.
POWDER METALLURGY , cilt.54, sa.3, ss.427-431, 2011 (SCI-Expanded) identifier identifier

Injection moulding of 316L stainless steels reinforced with nanosize alumina particles

Gulsoy H. O., Baykara T., Ozbek S.
POWDER METALLURGY , cilt.54, sa.3, ss.360-365, 2011 (SCI-Expanded) identifier identifier

Processing and mechanical properties of B4C reinforced Al matrix composites

Topcu I., Gulsoy H. O., Kadioglu N., Gulluoglu A. N.
JOURNAL OF ALLOYS AND COMPOUNDS , cilt.482, ss.516-521, 2009 (SCI-Expanded) identifier identifier

Effect of sintering parameters on mechanical properties of injection moulded Ti-6Al-4V alloys

Ergul E., GÜLSOY H. Ö., Gunay V.
POWDER METALLURGY , cilt.52, sa.1, ss.65-71, 2009 (SCI-Expanded) identifier identifier

Sintered foams from precipitation hardened stainless steel powder

Gulsoy H. O., German R. M.
POWDER METALLURGY , cilt.51, sa.4, ss.350-353, 2008 (SCI-Expanded) identifier identifier

Mechanical Properties of Polymers Filled with Iron Powder

Tasdemir M., GÜLSOY H. Ö.
INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS , cilt.57, sa.3, ss.258-265, 2008 (SCI-Expanded) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

Eklemeli İmalat Teknolojilerinin Tıbbi Ekipmanların Üretiminde Kullanımı

BOZKURT Y., GÜLSOY H. Ö., KARAYEL E.
El-Cezeri Fen ve Mühendislik Dergisi , cilt.8, sa.8, ss.962-980, 2021 (Scopus) identifier identifier

Influence of Niobium additions on sintering behaviors and mechanical properties of injection molded 420 stainless steel powder

yakut l., GÜLSOY H. Ö.
NANOMATERIALSSCIENCE ENGINEERING , cilt.1, sa.1, ss.34-41, 2019 (Hakemli Dergi)

Evaluation of Multi-Walled CNT Particulate Reinforced Ti6Al4V Alloy Based Composites Creep Behavior of Materials Under Static Loads

Topcu I., GÜLSOY H. Ö., GÜLLÜOĞLU A. N.
GAZI UNIVERSITY JOURNAL OF SCIENCE , cilt.32, sa.1, ss.286-298, 2019 (ESCI) identifier identifier

Effects of powder characteristics and processing conditions on the corrosion performance of 17-4 PH stainless steel fabricated by laser-powder bed fusion

Harish I., Harper T., Badwe S., Stitzel J., Gupta G., GÜLSOY H. Ö., et al.
Progress in Additive Manufacturing , cilt.3, ss.39-49, 2018 (Scopus)

Bor İlavesinin Toz Metal D2 Takım Çeliğinin Mikroyapı ve Mekanik Özelliklerine Etkisi

ÖZGÜN Ö., ERÇETİN A., BALALAN Z., GÜLSOY H. Ö., uzun m.
Fırat Üniversitesi Mühendislik Bilimleri Dergisi , cilt.29, sa.2, ss.87-96, 2017 (Hakemli Dergi)

Production of Boron Carbide Based Sandblast Nozzle By Using Low Pressure Powder Injection Molding Method and Modeling of Production Parameters via Artificial Neural Networks

Hartomacıoğlu S., Gülsoy H. Ö., Onat A.
Mathematical Modeling , cilt.1, sa.1, ss.40-47, 2017 (Hakemli Dergi) Creative Commons License

Water Absorption, Friction and Wear Behaviors of Polypropylene Composites Filled with Hydroxyapatite

Taşdemir M., Gülsoy H. Ö.
Key Engineering Materials , cilt.733, ss.60-64, 2017 (Scopus)

Effect of Nb addition on microstructural and mechanical properties of Ti-Nb based alloys produced by powder metallurgy

YILMAZ E., GÖKÇE A., FINDIK F., GÜLSOY H. Ö.
PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , cilt.23, sa.8, ss.945-948, 2017 (ESCI) identifier

Effect of Particle Size on Sintering Characteristics andMechanical Properties of Injection Molded 316L Powder

GÜLSOY H. Ö., bilketay s.
Advanced Science,Engineering and Medicine , cilt.8, 2016 (Hakemli Dergi)

Effect of Subsequent Aging on Wear Behaviour of SiCp Reinforced AA2124 Aluminum Metal Matrix Composite

Bozkurt Y., Bilici M. K., Salman S., Gülsoy H. Ö.
Journal of Scientific and Engineering Research , cilt.3, ss.34-40, 2016 (Hakemli Dergi)

Sintering and Mechanical Properties of Titanium Composites Reinforced Nano Sized Al2O3 Particles

Gülsoy H. Ö., Pazarlıoğlu S. S., Özbey S., Mesut Ç., Hanifi A.
International Journal of Materials, Mechanics and Manufacturing , cilt.4, ss.111-114, 2016 (Hakemli Dergi) Creative Commons License

Effect of Zr Nb and Ti Additions on Injection Molded 316L Stainless Steel Microstructural Mechanical Properties and Corrosion Resistance

Gülsoy H. Ö., Pazarlıoğlu S. S., Özbey S.
Advanced Materials Research , cilt.119, ss.505-509, 2015 (Hakemli Dergi) Creative Commons License

Toz Metalurjisi Ürünü Fe Cu C ve Fe Cu Parçalarının İşlenebilirlik Özelliklerinin Delme Testi ile Belirlenmesi

SALMAN S., GÜLSOY H. Ö.
Metal Dünyası , cilt.1, sa.125, ss.91-94, 2003 (Hakemsiz Dergi)

Mekanik Alaşımlama ve Uygulama Alanları

GÜNDÜZ O., BOZKURT Y., GÜLSOY H. Ö., SALMAN S.
Metal Dünyası , cilt.124, sa.124, ss.85-88, 2003 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

The Effect of Boron Addition on The Microstructure and Mechanical Properties of HCx Tool Steel

GÜLSOY H. Ö., NEVCANOĞLU N. Ş., NEVCANOĞLU A.
21. Uluslararası Metalurji ve Malzeme Kongresi (IMMC 22'), İstanbul, Türkiye, 06 Ekim 2022, ss.464-469

Sıcak İzostatik Preslemenin Lazer-Toz Yatak Füzyon Tekniği ile Üretilmiş 17-4PH Paslanmaz Çelikler Üzerine Etkisi

Deb Nath S., Irrinki H., Alhofors M., Stitzel J., GÜLSOY H. Ö., Atre S.
2. uluslararası türk dünyası mühendislik ve fen bilimleri kongresi, 7 - 10 Kasım 2019

Eklemeli İmalat Teknolojileri ve Uygulamaları

GÜLSOY H. Ö.
2. uluslararası türk dünyası mühendislik ve fen bilimleri kongresi, 7 - 10 Kasım 2019

Laser - powder bed fusion of bronze: microstructural, mechanical and elektrochemical properties’xx’xx

TOP M. N., GÜLSOY H. Ö.
Twenty-first Annual ConferenceYUCOMAT 2019Eleventh WorldRound Table Conferenceon Sintering - Science of Sintering Its Future: Fifty Years Later, 2 - 06 Eylül 2019

Powder injection molding of B4C-CrB2 composite based sandblast nozzles

HARTOMACIOĞLU S., GÜLSOY H. Ö.
AM-PM 2019, 23 - 26 Haziran 2019

Bronz Parçaların Seçici Lazer Ergitme (SLM) Metodu ile Üretilmesi: Mikroyapı ve Mekanik Özellikler

TOP M. N., GÜLSOY H. Ö.
IMSMATEC-2019, 21 - 23 Haziran 2019

Bronz Parçaların Seçici Lazer Ergitme (SLM) Metodu ile Üretilmesi: Mikroyapı ve Mekanik Özellikler

TOP M. N., GÜLSOY H. Ö.
he International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in Cappadocia / TURKEY (IMSMATEC 2019), 21 - 23 Haziran 2019

AISI-420 MARTENZİTİK PASLANMAZ ÇELİKLERİN TOZ ENJENSİYON KALIPLAMA METODU KULLANIKARAK ÜRETİLMESİ VE MİKROYAPI, MEKANİK VE KOROZYON ÖZELLİKLERİNİN İNCELENMESİ

Gülsoy H. Ö.
imsmatec2019, Nevşehir, Türkiye, 21 - 23 Haziran 2019, cilt.1, sa.1, ss.1-7

SÜRTÜNME KARIŞTIRMA NOKTA KAYNAĞI PROSES PARAMETRELERİNİN MİKROYAPI VE MEKANİK ÖZELLİKLERİ ÜZERİNDE ETKİSİ

Kırman M., BOZKURT Y., GÜLSOY H. Ö., AKÇAKALE N.
ZEUGMA 2. ULUSLARARASI MULTİDİSİPLİNER ÇALIŞMALAR KONGRESİ, Gaziantep, Türkiye, 18 - 20 Ocak 2019, cilt.3, ss.2027-2042

Influence of Ta addition on the microstructures and mechanical properties of biomedicalTi16Nb10Zr alloy

YILMAZ E., GÜLSOY H. Ö.
International Eurasian Conference on Science, Engineering and Technology (EurasianSciEnTech 2018), 22 - 23 Kasım 2018

Hydroxyapatite coating on Ti16Nb alloy by electrochemical deposition

YILMAZ E., GÜLSOY H. Ö., FINDIK F.
International Eurasian Conference on Science, Engineering and Technology (EurasianSciEnTech 2018), 22 - 23 Kasım 2018

Lazer-Toz Yatak Füzyon Tekniği ile Üretilmiş AISI-420 Paslanmaz Çeliklerin Mikroyapı ve Mekanik Özellikleri

Deb Nath S., Irrinki H., Kearns M., GÜLSOY H. Ö., sundar a.
CIEA2018, 20 - 22 Eylül 2018

Lazer-Toz Yatak Füzyon Tekniği ile Üretilmiş 17-4PH Paslanmaz Çeliklerin İncelenmesi

Irrinki H., Dilip Jangam J. S., Pasebani S., Badwe S., Stitzel J., Kate K., et al.
CIEA2018, 20 - 22 Eylül 2018

Effects of Hot Isostatic Pressing on the Mechanical Properties and Microstructures of 17-4 PH Stainless Steel Processed by Laser-Powder Bed Fusion

irrinki h., dep nath s., atre s., GÜLSOY H. Ö., Ahlfors M., Stitzel J.
powder met2018, 18 - 20 Haziran 2018

Investigation of the Corrosion Behavior of 420 Stainless Steel Processed by Laser-Powder Bed Fusion

dep nath s., irrinki h., gupta g., atre s., kearns m., GÜLSOY H. Ö.
powdermet2018, 18 - 20 Haziran 2018

Laser-Powder Bed Fusion of Bronze:Mechanical Properties

İRRİNKİ H., deb nath s., atre s., GÜLSOY H. Ö.
POWDERMET2018, 18 - 20 Haziran 2018

The Role of Powder Attributes in Laser-Powder Bed Fusion of 420 Stainless Steel

Deb Nath S., irrinki h., atre s., kearns m., GÜLSOY H. Ö.
POWDERMET2018, 18 - 20 Haziran 2018

Effect of Sintering Conditions on Mechanical Properties of Injection Molded Ti10Nb10Zr Alloy for Bio-applications

ışıl y., GÜLSOY N., GÜLSOY H. Ö.
Biomat2018, 12 - 16 Mart 2018

Influence of Zr addition on the corrosion behavior of biomedical PIM Ti-16Nb-(0, 5, 10) Zr alloys in SBF

YILMAZ E., GÖKÇE A., FINDIK F., GÜLSOY H. Ö.
Biomat2018, 12 - 16 Mart 2018

Biomedical Porous Ti-16Nb-10Zr-(0-15) Ta Alloys

YILMAZ E., GÖKÇE A., FINDIK F., GÜLSOY H. Ö.
Biomat2018, 12 - 16 Mart 2018

modelling of production parameters of B4C ZrO2 composites via artifical neural networks method

HARTOMACIOĞLU S., GÜLSOY H. Ö., BAKIRCIOĞLU B.
mathematical modelling 2017, 13 - 16 Aralık 2017

Application of a hybrid model : fractional experimental design artifical neural network grey relational analysis method on optimization of process parameters of powder metallurgy

HARTOMACIOĞLU S., GÜLSOY H. Ö., BAKIRCIOĞLU B., yüksel s.
mathematical modelling 2017, 13 - 16 Aralık 2017

The Effect of Copper Addition On Mechanical and Corrosion Properties of AA 1055 Aluminium Alloys

imamoglu k., ÖZBEY S., SALMAN S., GÜLSOY H. Ö.
IATS 2017, 19 - 22 Ekim 2017

Electrochemical Corrosion Behavior of Ti and Ti-16Nb Alloy for Implant Applications

YILMAZ E., GÖKÇE A., FINDIK F., GÜLSOY H. Ö.
IATS 2017, 19 - 22 Ekim 2017

investigation of rheological properties of cobalt based superalloy powder PIM feedstock

gayretli e., GÜLSOY H. Ö.
ICMTM2017, 24 - 25 Ekim 2017

Production of boron carbide based sandblasting nozzle by using low pressure powder injection molding method and modeling of production parameters via artificial neural network

HARTOMACIOĞLU S., GÜLSOY H. Ö., ONAT A.
International scientific congrees machines, technologies, materials, Varna, Bulgaristan, 13 - 16 Eylül 2017

Production of boron carbide based sandblasting nozzle by using low pressure powder injection molding method and modelling of production parameters via artifical neural network

HARTOMACIOĞLU S., GÜLSOY H. Ö., ONAT A.
international scientific congress machines, technologies, materials, 13 - 16 Eylül 2017

DEVELOPMENT OF tİ16NBxzR ALLOY FOR İMPLANT APPLİCATİONS

YILMAZ E., GÖKÇE A., FINDIK F., GÜLSOY H. Ö.
4. CENTRAL AND EASTERN EUROPEAN CONFERANCE ON THERMAL ANALYSİS AND CALORİMETER, 28 - 31 Ağustos 2017

Electrochemical Behavior of injection Molded Gas and Water Atomized 17-4PH Stainless Steel Powder

ÖZBEY S., AKDAĞ E., KALIN G., GÜLSOY H. Ö.
International Conference on Powder Metallurgy and Particulat Materials, 13 - 17 Haziran 2017

Bonive derived hydroxyapatite-sammarium oxide composites for biomedical applications

PAZARLIOĞLU S. S., demir s., aktaş s., GÜLSOY H. Ö., SALMAN S.
POWDERMET2017, 13 - 16 Haziran 2017

Injection molding of Micro-Porous Ti10Nb10Zr Alloy

aktaş s., durumlu s., özgül c., PAZARLIOĞLU S. S., ÖZBEY S., GÜLSOY H. Ö.
POWDERMET2017, 13 - 16 Haziran 2017 identifier

Karbon Nanotüp (CNT) Takviyeli Ti6Al4V bazlı kompozitlerinaşınma davranışlarının incelenmesi

TOPCU İ., GÜLLÜOĞLU A. N., BİLİCİ M. K., GÜLSOY H. Ö.
II. Savunma Sanayi Sempozyumu, Kırıkkale, Türkiye, 6 - 08 Nisan 2017

Effect o Sn addition on Microstructure mechanical properties and corrosion behaviour of Ti-Nb based biomedical alloys

YILMAZ E., GÖKÇE A., FINDIK F., GÜLSOY H. Ö.
APMAS 2017, 22 - 26 Nisan 2017

Toz Enjeksiyon Kalıplama Yöntemi ile TiB2 ilaveli B4C Kompozitlerin Üretimi

HARTOMACIOĞLU S., GÜLSOY H. Ö., SALMAN S.
2. uluslararası savunma sanayi sempozyumu, 6 - 08 Nisan 2017

Karbon nanotüpler ile (KNT) güçlendirilmiş titanyum (Ti6Al4V) metal matrisli kompozitlerin mekanik davranışlarının incelenmesi

TOPCU İ., GÜLSOY H. Ö., GÜLLÜOĞLU A. N.
2. uluslararası savunma sanayi sempozyumu, 6 - 08 Nisan 2017

yapay sinir ağları yöntemiyle değişik ilaveli B4C kompozitlerin yoğunluklarının tahmin performanslarının incelenmesi

HARTOMACIOĞLU S., GÜLSOY H. Ö.
2. uluslararası savunma sanayi sempozyumu, 6 - 08 Nisan 2017

DEVELOPİNG OF MECHANICAL BEHAVIOR OF PARTICULATE REINFORCED TITANIUM MATRIX COMPOSITE

TOPCU İ., GÜLLÜOĞLU A. N., GÜLSOY H. Ö.
“ISTANBUL INTERNATIONAL CONFERENCE ON PROGRES IN APPLIED SCIENCE 2017, İstanbul, Türkiye, 4 - 06 Ocak 2017

“Investigation of Ti6Al4V Powder Wetting behavior reinforced with Carbon Nanotubes

TOPCU İ., GÜLLÜOĞLU A. N., GÜLSOY H. Ö.
“ISTANBUL INTERNATIONAL CONFERENCE ON PROGRES IN APPLIED SCIENCE 2017”, İstanbul, Türkiye, 4 - 06 Ocak 2017

“İnvestigated Characterization and Mechanical Behavior Of Carbon Nanotubes Reinforced Aluminum Matrix Composite Materials”

TOPCU İ., GÜLSOY H. Ö., GÜLLÜOĞLU A. N.
“ISTANBUL INTERNATIONAL CONFERENCE ON PROGRES IN APPLIED SCIENCE 2017, İstanbul, Türkiye, 4 - 06 Ocak 2017

“DETERMİNATİON OF Ti6Al4V POWDER MATRİX TO BE REİNFORCED CARBON NANO TUBE (CNT) CHARECTERİSATİON OF POWDERS

TOPCU İ., GÜLSOY H. Ö., GÜLLÜOĞLU A. N.
“ISTANBUL INTERNATIONAL CONFERENCE ON PROGRES IN APPLIED SCIENCE 2017, İstanbul, Türkiye, 4 - 06 Ocak 2017

TOZ METALURJİSİ İLE ÜRETİLEN BİYOMEDİKAL Ti Nb ESASLI ALAŞIMLARDA NB İLAVESİNİN MİKROYAPI VE MEKANİK ÖZELLİKLERE ETKİSİ

YILMAZ E., GÖKÇE A., FINDIK F., GÜLSOY H. Ö.
16. Uluslararası Malzeme Sempozyumu, 12 - 14 Ekim 2016

Microstructural Evolution and Mechanical Properties of type Ti10Nb10Zr Alloy Produced by Metal Injection Molding

YEMİŞCİ I., GÜLSOY H. Ö.
WORLDPM2016, 9 - 13 Ekim 2016

Sintering Dissolution Process For Manufacturing Ni Based Superalloy Foams

TİMAÇ G., GÜLSOY H. Ö.
WORLDPM2016, 9 - 13 Ekim 2016

Powder Injection Molded of Ti10Nb10Zr Alloy for Bio applications Electrochemical Properties and Biocompatibility

yemişci ı., GÜLSOY H. Ö., MUTLU Ö., GÜLSOY N.
worldPM2016, 9 - 13 Ekim 2016

Rheological Properties of Boron Carbide B4C Feedstock for Powder Injection Molding

BİLKETAY S., GÜLSOY H. Ö.
ELECTAM2016, 22 - 24 Şubat 2016

BOR İLAVESİNİN D2 TAKIM ÇELİĞİNİN MİKROYAPI VE MEKANİK ÖZELLİKLERİNE ETKİSİ

ÖZGÜN Ö., UZUN M., BALALAN Z., GÜLSOY H. Ö., ERÇETİN A.
IMSTEC2016, 6 - 08 Nisan 2016

Effect of Different Additions on Sintering Behavior of Injection Molded B4C Powder

Hartomacioglu s., GÜLSOY H. Ö., bilketay s.
ELECTAM2016, 22 - 24 Şubat 2016

Effect of Different Additions on Sintering Behaviour of Injection Molded B4C Powder

HARTOMACIOĞLU S., GÜLSOY H. Ö., Bilketay S.
1st EuropeanLatin-American Conference of Theoretical and Applied Mechanics (ELECTAM), 22 - 24 Şubat 2016

Effect of Particle Size on Sintering Characteristics and Mechanical Properties of Injection Molded 316L Powder

GÜLSOY H. Ö., sezer b.
The 3rd International Conference onKinematics, Mechanics of RigidBodies, and Materials 2015(MechKinematics 2015), Balvi, Letonya, 19 - 20 Aralık 2015

IN 718 SUPERALLOY FOAM PROCESSED BY POWDER SPACE HOLDERTECHNIQUE MICROSTRUCTURAL AND MECHANICALCHARACTERIZATION

gökhan t., GÜLSOY H. Ö.
The International Porous and Powder Materials Symposium and Exhibition, İzmir, Türkiye, 15 - 18 Eylül 2015

Enhancing the corrosion resistance and biocompability of injection molded 316L stainless steel for Bio applications

PAZARLIOĞLU S. S., BÜŞRA G., MUTLU Ö., GÜLSOY N., GÜLSOY H. Ö.
16th International Scientific Conress, CNIC 2015, 22 - 24 Haziran 2015

Sintering and mechanical properties of Titanium composites reinforced Nano Al2O3 Particles

GÜLSOY H. Ö., ÖZBEY S., PAZARLIOĞLU S. S., çiftçi m., hanifi a.
2015 International Conference on Smart Manufacturing Technologies, 14 - 15 Haziran 2015

Enhancing the Corrosion Resistance and Biocompatibility of Injection Molded 316L Stainless Steel for Bio applications

PAZARLIOĞLU S. S., Büşra G., MUTLU Ö., GÜLSOY N., GÜLSOY H. Ö.
16. International Scientific Congress CNIC 2015, 22 - 26 Haziran 2015

Sintering and Mechanical Properties of Titanium Composites Reinforced Nano Sized Al2O3 Particles

GÜLSOY H. Ö., ÖZBEY S., PAZARLIOĞLU S. S., mesut ç., akyurt h.
2015 International Conference on Smart Manufacturing Technologies (ICSMT 2015), st. petersburg, Rusya, 14 - 15 Haziran 2015

Effect of Zr Nb and Ti Additions on Injected Molded 316L Stainless Steel Microstructural Mechanical and Corrosion Resistance

GÜLSOY H. Ö., PAZARLIOĞLU S. S., ÖZBEY S.
International Conference on Nano and Materials Engineering (ICNME 2015), 2 - 03 Nisan 2015

Effect of Zr Nb and Ti Additions on Injection Molded 316L Stainless Steel Microstructural Mechanical Properties and Corrosion Resistance

GÜLSOY H. Ö., PAZARLIOĞLU S. S., ÖZBEY S.
International Conference on Nano and Materials Engineering (ICNME 2015), Phuket, Tayland, 2 - 03 Nisan 2015

Electrochemical Investigation of Corrosion Behaviour of Boron Doped Powder Metallurgy 316L Stainless Steels in acidic Media

Er Ö., KILIÇ H., Berkem M. L., MADAKBAŞ S., GÜLSOY H. Ö.
JESTECH 15, Karabük, Türkiye, 10 Nisan 2013 - 13 Nisan 2012, ss.2

19 European Symposium on Polymer Spectroscopy

GÜLSOY H. Ö., KILIÇ H., MADAKBAŞ S., Er Ö., Mustafa B.
JESTECH(Engineering Science and Technology an International Journal)., Karabük, Türkiye, 12 - 15 Haziran 2012, ss.129-133

Nano ve Mikro Boyuttaki 5 ve 10 Al2O3 Partikül Takviyeli 316L Paslanmaz Çelik Malzemelerin Mekanik ve Mikroyapı Özellikleri

PAZARLIOĞLU S. S., GÜLSOY H. Ö., KOZ M., SALMAN S.
6th International Advanced Technologies Symposium, 16 - 18 Mayıs 2011

Characterization of Porous Bovine Hydroxyapatite BHA Structures and Porous BHA Commercial Inert Glass CIG Composites

PAZARLIOĞLU S. S., GÜLSOY H. Ö., OKTAR F. N., SALMAN S.
Biyomalzeme, 9 - 12 Ekim 2011

Injection Molding of Mechanical Alloyed Ti-Fe-Zr Powder

GÜLSOY H. Ö., Gunay V., Baykara T., German R. M.
12th World Conference on Titanium (Ti-2011), Beijing, Çin, 19 - 24 Haziran 2011, ss.1812-1816 identifier

Thermal Conductivity Permeability and Mechanical Properties of Sintered Stainless Steel Foams

GÜLSOY H. Ö., ATMACA M.
Euro PM2009 – PM Lightweight & Porous Materials I., 12 - 14 Ekim 2009 identifier

Sinterlenmiş D2 Takım Çeliklerine Katılan TiCN Miktarının Aşınma Davranışlarına Etkisi

GÜLSOY H. Ö., BOZKURT Y., BİLİCİ M. K., SALMAN S.
11. International Materials Symposium, 19 - 21 Nisan 2006, ss.273-277 Sürdürülebilir Kalkınma

Bor Katkılı Demir Esaslı Toz Metal Parçaların Aşınma Davranışlarının İncelenmesi

BİLİCİ M. K., GÜLSOY H. Ö.
I.International Vocational and Technical Education Technologies Congress, 5 - 09 Eylül 2005 Sürdürülebilir Kalkınma

Kitap & Kitap Bölümleri

Powder binder formulation and compound manufacture in metal injection molding (MIM)

ENNETI R., ONBATTUVELLI V., GÜLSOY H. Ö., kate k., atre s.
Handbook of Metal Injection Molding - 2nd Edition - Elsevier, Donald Heaney, Editör, elsevier, NA, ss.5-70, 2018

METALOGRAFİ BİLİMİ NOBEL ANKARA

SALMAN S., GÜLSOY H. Ö.
NOBEL, 2014

Metalografi Bilimi

GÜLSOY H. Ö., SALMAN S.
Nobel yayın evi, 2004

Metrikler

Yayın

116

Atıf (WoS)

837

H-İndeks (WoS)

17

Atıf (Scopus)

843

H-İndeks (Scopus)

17

Proje

13

Tez Danışmanlığı

2

Açık Erişim

5
BM Sürdürülebilir Kalkınma Amaçları