Yayınlar & Eserler

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Investigation of Creep Behavior of CNT Reinforced Ti6Al4V Under Dynamic Loads

JOURNAL OF THE CHEMICAL SOCIETY OF PAKISTAN, cilt.42, ss.70-80, 2020 (SCI İndekslerine Giren Dergi) identifier

Investigation of wear behavior of Ti-6Al-4V/CNT composites reinforced with carbon nanotubes

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, cilt.34, ss.1442-1449, 2019 (SCI İndekslerine Giren Dergi) Creative Commons License identifier identifier

Platinum adsorption from chloride media using carbonized biomass and commercial sorbent

MINERALS & METALLURGICAL PROCESSING, cilt.30, ss.129-136, 2013 (SCI İndekslerine Giren Dergi) identifier identifier

IN THE JEWELRY, BRAZING AND LASER WELDING WITH PARAMETER OPTIMIZATION

ARCHIVES OF METALLURGY AND MATERIALS, cilt.57, ss.525-537, 2012 (SCI İndekslerine Giren Dergi) identifier

Radiation induced modification of dielectric and structural properties of Cu/PMMA polymer composites

JOURNAL OF NON-CRYSTALLINE SOLIDS, cilt.356, ss.856-863, 2010 (SCI İndekslerine Giren Dergi) identifier

Effect of irradiation by 140 Mev Ag11+ ions on the optical and electrical properties of polypropylene/TiO2 composite

NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, cilt.267, ss.3456-3460, 2009 (SCI İndekslerine Giren Dergi) identifier identifier

Processing and mechanical properties of B4C reinforced Al matrix composites

JOURNAL OF ALLOYS AND COMPOUNDS, cilt.482, ss.516-521, 2009 (SCI İndekslerine Giren Dergi) identifier identifier

Preparation and Thermal Stress Analysis of Al2O3 Insulation Coatings on SS-304 Tape

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, cilt.19, ss.2375-2378, 2009 (SCI İndekslerine Giren Dergi) identifier identifier

Temperature Dependent Mechanical Characterisation of Styrene-Acrylonitrile

POLYMERS & POLYMER COMPOSITES, cilt.17, ss.247-252, 2009 (SCI İndekslerine Giren Dergi) identifier

Dielectric properties of polymer composites filled with different metals

JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY, cilt.45, ss.462-469, 2008 (SCI İndekslerine Giren Dergi) identifier identifier

An Analytical Model for Compressive Creep Behavior of HDPE Used in Plastic Pipe Manufacturing

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, cilt.47, ss.1302-1307, 2008 (SCI İndekslerine Giren Dergi) identifier identifier

Dislocation generation in GaAs crystals grown by the vertical gradient freeze method

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, cilt.102, ss.179-187, 2000 (SCI İndekslerine Giren Dergi) identifier identifier

Effect of growth direction on twin formation in GaAs crystals grown by the vertical gradient freeze method

CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES, cilt.1, ss.85-89, 2000 (SCI İndekslerine Giren Dergi) identifier

Dislocation dynamics simulations in the presence of interacting cracks

JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, cilt.121, ss.151-155, 1999 (SCI İndekslerine Giren Dergi) identifier identifier

Simulation of dislocation configurations in the presence of mobile point defects

SCRIPTA MATERIALIA, cilt.36, ss.123-128, 1997 (SCI İndekslerine Giren Dergi) identifier identifier

DISLOCATION GENERATION IN GAAS CRYSTALS GROWN BY THE BRIDGMAN METHOD USING A CRYSTALLOGRAPHIC MODEL

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, cilt.2, ss.67-78, 1994 (SCI İndekslerine Giren Dergi) identifier identifier

SIMULATION OF DISLOCATION MICROSTRUCTURES IN 2 DIMENSIONS .2. DYNAMIC AND RELAXED STRUCTURES

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, cilt.1, ss.383-402, 1993 (SCI İndekslerine Giren Dergi) identifier identifier

A CRYSTALLOGRAPHIC METHODOLOGY FOR MODELING DISLOCATION DYNAMICS IN GAAS CRYSTALS GROWN FROM MELT

JOURNAL OF APPLIED PHYSICS, cilt.73, ss.1650-1656, 1993 (SCI İndekslerine Giren Dergi) identifier identifier

SIMULATION OF DISLOCATION MICROSTRUCTURES IN 2 DIMENSIONS .1. RELAXED STRUCTURES

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, cilt.1, ss.1-17, 1992 (SCI İndekslerine Giren Dergi) identifier identifier

DISLOCATION DISTRIBUTIONS IN 2 DIMENSIONS

SCRIPTA METALLURGICA, cilt.23, ss.1347-1352, 1989 (SCI İndekslerine Giren Dergi) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

Strategy Development Process in Higher Education The Case of Marmara University

Procedia-Social and Behaviroal Sciences, cilt.235, ss.36-45, 2016 (Düzenli olarak gerçekleştirilen hakemli kongrenin bildiri kitabı) Creative Commons License

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

PROCESSING AND MECHANICAL PROPERTIES OF CARBONNANOTUBE (CNT) REINFORCED ALUMINUM MATRIX COMPOSITES

1. international Turkısh World Engineering and Science Congress(ITWESC-2017), Antalya, Türkiye, 7 - 10 Aralık 2017

MECHANICAL PROPERTIES OF PLA AND ABS PARTSMANUFACTURED BY THE 3D PRINTER FUSED FILAMENTFABRICATION PROCESS

1. international Turkısh World Engineering and Science Congress(ITWESC-2017), Antalya, Türkiye, 7 - 10 Aralık 2017

Surface Design of Turkish Infantry Rifle by PTFE and Electroless Nickel Coating Systems

”, 2nd International Mediterranean Science and Engineering Congress, IMSEC 2017, Adana, Türkiye, 25 - 27 Ekim 2017

The Similar and Dissimilar MIG Welding of 304 and 321 Austenitic Stainless Steels

”,2nd International Mediterranean Science and Engineering Congress, IMSEC 2017, Adana, Türkiye, 25 - 27 Ekim 2017

Investigation of Ti6Al4V Powder Mechanical properties reinforced with Boron Nitride Powder

IDEFIS2017, Uluslar arası II. Savunma sanayii sempozyumu, Kırıkkale, Türkiye, 6 - 08 Nisan 2017

Investigation of Wear behavior of Ti6Al4V based composite reinforced with Carbon Nanotubes(CNT)

IDEFIS2017, uluslar arası II. savunma Sanayii Sempozyumu, Kırıkkale, Türkiye, 6 - 08 Nisan 2017

Desıgn of Glass Shapıng Molds

International Conference on Advances and Innovations in Engineering (ICAIE) Fırat University Elazığ, Elazığ, Türkiye, 10 - 12 Mayıs 2017, ss.1085

Surface Desıgn of Gun Barrel of Infantry Troops’s Rifle

ICAIE (International Conference on Advances and Innovations in Engineering) Fırat University Elazığ, Elazığ, Türkiye, 10 - 12 Mayıs 2017, ss.1084

Surface Desıgn of Alumınıum and Zınc Extrusıon Dıes

ICAIE (International Conference on Advances and Innovations in Engineering) Fırat University Elazığ, Elazığ, Türkiye, 10 - 12 Mayıs 2017, ss.1091

Strategy Development Process in Higher Education: The Case of Marmara University

12th International Strategic Management Conference (ISMC), Antalya, Türkiye, 28 - 30 Ekim 2016, cilt.235, ss.36-45 Creative Commons License identifier

The similar and dissimilar MIG welding of 304 and 316 austenitic stainless steels

1st International Mediterranean Science and Engineering Congress, Adana, Türkiye, 26 - 28 Ekim 2016

Characterization Of Carbon Nanotubes Reinforced Aluminum Matrix Composite Materials

12th International Nanoscience and Nanotechnology Conference, 3 - 05 Haziran 2016

Mechanıcal Behavıor Examınatıon Of Tıtanıum Metal MatrıxComposıte Reınforced Wıth Boron Nıtrıde Powder

12th International Nanoscience and Nanotechnology Conference, Kocaeli, Türkiye, 3 - 05 Haziran 2016

Investigation of Hardening of AISI 4140 Steel Using Nd YAG LASER

15th International Materials Symposium Pamukkale (IMSP) 2014, Denizli, Türkiye, 15 - 17 Ekim 2014

SIMULATION OF STEADY-STATE DISLOCATION CONFIGURATIONS

SYMP ON MATERIALS MODELLING : FROM THEORY TO TECHNOLOGY, IN HONOUR OF THE 60TH BIRTHDAY OF RON BULLOUGH, Oxford, İngiltere, 26 - 27 Eylül 1991, ss.85-90 identifier