Prof.Dr. BÜLENT EKİCİ

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

An innovative composite elbow manufacturing method with 6-axis robotic additive manufacturing for fabrication of complex composite structures

İpekçi A., EKİCİ B.

Journal of Thermoplastic Composite Materials , cilt.37, sa.1, ss.402-425, 2024 (SCI-Expanded)

An Evaluation on Acoustic Behavior of Untreated Tree Trunks Depending on Bark Physical Properties and Fiber Cell Structure

SAĞLAM S., GÜZELÇİMEN F., Bingol D., ÖZKAN U. Y., EKİCİ B.

JOURNAL OF NATURAL FIBERS , cilt.19, sa.4, ss.1507-1521, 2022 (SCI-Expanded)

Effect of fiber set-up and density on mechanical behavior of robotic 3D-printed composites

Ipekci A., EKİCİ B.

EMERGING MATERIALS RESEARCH , cilt.11, sa.1, ss.160-166, 2022 (SCI-Expanded) Sürdürülebilir Kalkınma

Effect of solution blown nanofibers on Mode-I fracture toughness and dynamic mechanical properties of carbon fiber-reinforced composites

POLAT Y., EKİCİ B., Kılıç A.

POLYMER COMPOSITES , cilt.42, sa.10, ss.5445-5454, 2021 (SCI-Expanded)

Experimental and statistical analysis of robotic 3D printing process parameters for continuous fiber reinforced composites

Ipekci A., EKİCİ B.

JOURNAL OF COMPOSITE MATERIALS , cilt.55, sa.19, ss.2645-2655, 2021 (SCI-Expanded) Sürdürülebilir Kalkınma

Graphene oxide/epoxy acrylate nanocomposite production via SLA and importance of graphene oxide surface modification for mechanical properties

Uysal E., ÇAKIR M., EKİCİ B.

Rapid Prototyping Journal , cilt.27, ss.682-691, 2021 (SCI-Expanded)

An experimental investigation on ballistic efficiency of silica-based crosslinked aerogels in aramid fabric

Ayten A. I., TAŞDELEN M. A., EKİCİ B.

CERAMICS INTERNATIONAL , cilt.46, sa.17, ss.26724-26730, 2020 (SCI-Expanded)

A numerical and experimental investigation on quasi-static punch shear test behavior of aramid/epoxy composites

Ayten A. İ., EKİCİ B., Taşdelen M. A.

Polymers and Polymer Composites , cilt.28, sa.6, ss.398-409, 2020 (SCI-Expanded)

Effect of Hot Forging Pressure and Heat Treatment on CW625N Lead Free Brass Alloy Dezincification Resistance

Dogan S. O., EKİCİ B.

ACTA PHYSICA POLONICA A , cilt.137, sa.4, ss.545-550, 2020 (SCI-Expanded)

Effect of air pressure on nanofiber production in solution blowing method

POLAT Y., YANGAZ M. U., Calisir M. D., GÜL M. Z., Demir A., EKİCİ B., et al.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.35, sa.4, ss.1719-1728, 2020 (SCI-Expanded)

Evaluation of reliability of zirconia materials to be used in implant-retained restoration on the atrophic bone of the posterior maxilla: A finite element study

DEĞİRMENCİ K., Kocak-Buyukdere A., EKİCİ B.

JOURNAL OF ADVANCED PROSTHODONTICS , cilt.11, sa.2, ss.112-119, 2019 (SCI-Expanded)

Optimization of high hardness perforated steel armor plates using finite element and response surface methods

Kilic N., EKİCİ B., Bedir S.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES , cilt.24, sa.7, ss.615-624, 2017 (SCI-Expanded)

Finite element analysis on the optimal material choice and cavity design parameters for MOD inlays exposed to different force vectors and magnitudes

Sener-Yamaner I. D., EKİCİ B., Sertgoz A., Yuzbasioglu E., Ozcan M.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.31, sa.1, ss.8-20, 2017 (SCI-Expanded)

Effect of surface geometry on low-velocity impact behavior of laminated aramid-reinforced polyester composite

AYTEN A., EKİCİ B., GÜLLÜOĞLU A. N.

JOURNAL OF COMPOSITE MATERIALS , cilt.50, sa.29, ss.4077-4091, 2016 (SCI-Expanded)

A NUMERICAL AND AN EXPERIMENTAL INVESTIGATION OF A HIGH-PRESSURE DIE-CASTING ALUMINUM ALLOY

BOYDAK Ö., Savas M., EKİCİ B.

INTERNATIONAL JOURNAL OF METALCASTING , cilt.10, sa.1, ss.56-69, 2016 (SCI-Expanded)

Three-dimensional finite element analysis of shaping curved root canals with the ProTaper and HeroShaper systems

Mutlu B., Kurt M., Ekici B., Atakök G.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , cilt.37, ss.541-547, 2015 (SCI-Expanded)

Optimization of design parameters for Turkish Tirkes (war) bow

Demir S., EKİCİ B.

COMPOSITES PART B-ENGINEERING , cilt.66, ss.147-155, 2014 (SCI-Expanded)

Ballistic behavior of high hardness perforated armor plates against 7.62 mm armor piercing projectile

Kilic N., Bedir S., Erdik A., EKİCİ B., TAŞDEMİRCİ A., GÜDEN M.

MATERIALS & DESIGN , cilt.63, ss.427-438, 2014 (SCI-Expanded)

Sustainable machining of the magnesium alloy materials in the CNC lathe machine and optimization of the cutting conditions

Eker B., EKİCİ B., KURT M., Bakur B.

Mechanika , cilt.20, sa.3, ss.310-316, 2014 (SCI-Expanded)

Ballistic resistance of high hardness armor steels against 7.62 mm armor piercing ammunition

Kilic N., EKİCİ B.

MATERIALS & DESIGN , cilt.44, ss.35-48, 2013 (SCI-Expanded)

Improving Sound Absorption Property of Polyurethane Foams by Adding Tea-Leaf Fibers

EKİCİ B., KENTLİ A., KÜÇÜK H.

ARCHIVES OF ACOUSTICS , cilt.37, sa.4, ss.515-520, 2012 (SCI-Expanded)

The effects of static dynamic and fatigue behaviour on three dimensional shape optimization of Kayabaşi Ekici type hip prosthesis by finite element method and probabilistic approach

KAYABAŞI O., EKİCİ B.

Journal Of Biomechanics , cilt.44, ss.6, 2011 (SCI-Expanded)

The Size of the Esophageal Hiatus in Gastroesophageal Reflux Pathophysiology: Outcome of Intraoperative Measurements

BATIREL H. F., Uygur-Bayramicli O., GİRAL A., Ekici B., Bekiroglu N., YILDIZELİ B., et al.

JOURNAL OF GASTROINTESTINAL SURGERY , cilt.14, sa.1, ss.38-44, 2010 (SCI-Expanded)

Static, dynamic and fatigue analysis of a semi-automaticgun locking block

Ozmen D., KURT M., EKİCİ B., KAYNAK Y.

ENGINEERING FAILURE ANALYSIS , cilt.16, sa.7, ss.2235-2244, 2009 (SCI-Expanded)

Probabilistic design of a newly designed cemented hip prosthesis using finite element method

KAYABAŞI O., EKİCİ B.

MATERIALS & DESIGN , cilt.29, sa.5, ss.963-971, 2008 (SCI-Expanded)

Probabilistic design of sheet-metal die by finite element method

DEMİR C. İ., KAYABAŞI O., EKİCİ B.

MATERIALS & DESIGN , cilt.29, sa.3, ss.721-727, 2008 (SCI-Expanded)

The effects of static, dynamic and fatigue behavior on three-dimensional shape optimization of hip prosthesis by finite element method

KAYABAŞI O., EKİCİ B.

MATERIALS & DESIGN , cilt.28, sa.8, ss.2269-2277, 2007 (SCI-Expanded)

Automated design methodology for automobile side panel die using an effective optimization approach

KAYABAŞI O., EKİCİ B.

MATERIALS & DESIGN , cilt.28, sa.10, ss.2665-2672, 2007 (SCI-Expanded)

Role of impact on determination of interfacial toughness measurement by indentation for thermal barrier coating systems

EKİCİ B.

SURFACE ENGINEERING , cilt.21, ss.456-462, 2005 (SCI-Expanded)

Multi-response optimisation in a three-link leaf-spring model

Ekici B.

INTERNATIONAL JOURNAL OF VEHICLE DESIGN , cilt.38, sa.4, ss.326-346, 2005 (SCI-Expanded)

Influence of occlusal forces on stress distribution in preloaded dental implant screws

Alkan I., Sertgoz A., Ekici E.

JOURNAL OF PROSTHETIC DENTISTRY , cilt.91, sa.4, ss.319-325, 2004 (SCI-Expanded)

Effects of residual stress patterns on TBC systems

Ekici B.

SURFACE ENGINEERING , cilt.20, sa.1, ss.37-42, 2004 (SCI-Expanded)

Numerical analysis of a dental implant system in three dimension

EKİCİ B.

Advances In Engineering Software , cilt.33, ss.109-113, 2002 (SCI-Expanded)

Surface modification for improving the formability of SPA laminated composite

Ekici B., Altintas S.

ADVANCES IN ENGINEERING SOFTWARE , cilt.30, sa.7, ss.451-458, 1999 (SCI-Expanded)

Determination of the shear strength requirement for the adhesive used between cavity filling materials and dentine

EKİCİ B., ALTINTAŞ S.

Advances In Engineering Software , cilt.18, ss.87-93, 1993 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Thermal and structural analysis of oil-based type transformer

Dursun B. N., Ekici B.

Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi , cilt.13, sa.1, ss.84-93, 2024 (Hakemli Dergi)

MECHANICAL PERFORMANCE OF CARBON - ARAMID FIBER-REINFORCED LAMINATED COMPOSITES UNDER IMPACT AND SHEAR LOADING

ATMACA B. N., ORUÇ R., AŞÇI G., YİĞİT K., YÜZER S., POLAT Y., et al.

Eskişehir Technical University Journal of Science and and Technology A- Applied Sciences and Engineering , cilt.22, ss.19-27, 2021 (Hakemli Dergi)

Synthesizing UV Curable Silicon Acrylate Resins for SLA Type 3D Printers and Characterization of Mechanical, Thermal and Morphological Properties

UYSAL E., ÇAKIR M., EKİCİ B.

Journal of Current Research on Engineering, Science and Technology , cilt.5, sa.1, ss.47-56, 2019 (Hakemli Dergi)

The Similar and Dissimilar Spot Welding of 304 and 316L Austenitic Stainless Steels

ÇINAR Ö., ÇETİNER B. N., TOPCU İ., GÜLLÜOĞLU A. N., EKİCİ B.

Materials for Future , cilt.1, sa.1, ss.20-23, 2017 (Hakemli Dergi)

Determination of penetration depth at high velocity impact using finite element method and artificial neural network tools

Kilic N., EKİCİ B., HARTOMACIOĞLU S.

DEFENCE TECHNOLOGY , cilt.11, sa.2, ss.110-122, 2015 (ESCI)

Eğri kök kanallarında şekillendirme sırasında oluşan streslerin sonlu elemanlar yöntemi ile dğerlendirilmesi

TÜRKAYDIN D., GÜNDAY M., EKİCİ B.

MÜSBED , cilt.3, sa.1, ss.14-18, 2013 (Hakemli Dergi)

3D Bio Cad modeling of human mandible and fabrication by rapid prototyping technology

Ay M., Tınaz K., Delilbaşı B. Ç., Ekici B., Yüzbaşıoğlu H. E., Hartomacıoğlu S.

Usak University Journal of Material Sciences , cilt.1, ss.135-145, 2013 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

The Study on Noise Reduction Analysis of UntreatedLeaves of Plants in Urban Areas

SAĞLAM S., BİNGÖL D., ÖZKAN U. Y., EKİCİ B., GÜZELÇİMEN F.

Turkish Physical Society 35th International PhysicsCongress (TPS35), 4 - 08 Ekim 2019, cilt.1, ss.82-86

SYNTHESIZING UV CURABLE SILICON ACRYLATE RESINS FOR SLA TYPE 3D PRINTERS ANDCHARACTERIZATION OF MECHANICAL, THERMAL AND MORPHOLOGICAL PROPERTIES

UYSAL E., ÇAKIR M., EKİCİ B.

International Conference on Multidisciplinary Sciences (icomus) 2019, 22 - 24 Ağustos 2019

Farklı İmplant Destekli Restorasyon Tiplerine Göre Stres Dağılımının Değerlendirilmesi: 3 Boyutlu Sonlu Elemanlar Analizi

DEĞİRMENCİ K., KOÇAK BÜYÜKDERE A., EKİCİ B.

Uluslararası 9. Biyomekanik Kongresi, 19 - 22 Eylül 2018 Sürdürülebilir Kalkınma

Açılış Oturumu (Konuşmacı)

UYAR T. S., EKİCİ B.

IRENEC 2017, 7. Uluslararası 100 Yenilenebilir Enerji Konferansı, 18 - 20 Mayıs 2017

The Similar and Dissimilar Resistance Spot Welding of 321 and 316 Austenitic Stainless Steel

ÇINAR Ö., Alyanakoğlu A. E., Çakır T., ÇETİNER B. N., EKİCİ B., GÜLLÜOĞLU A. N.

IMSEC2016, Adana, Türkiye, 26 - 28 Ekim 2016

A NEW DESIGN FOR TILTABLE AND TELESCOPIC STEERING COLUMN WITH HIGH PRESSURE DIE CASTING TECHNOLOGY AND SPECIAL ALLOY MAGSIMAL 59 FOR AGRICULTURE MACHINES

BİLGİN H., EKİCİ B.

UMTIK2016, 12 - 15 Temmuz 2016 Sürdürülebilir Kalkınma

APPLICATION OF FEM METHOD ON DESIGN AND MANUFACTURING OF MACHINES FOR SELF CLINCHING OF NUTS DURING STAMPING FOR AUTOMOTIVE SIDE PANEL INTERIOR PARTS

KARATAŞ U., ARIKAN G., DAĞDELEN K., EKİCİ B.

UMTIK2016, 12 - 15 Temmuz 2016

Diş Kök Kanalının Ve Protaper Ni Ti Kesici Uçların Sonlu Elemanlar Yöntemi İle Modellenmesi Ve Simülasyonu

MUTLU B., KURT M., EKİCİ B., ATAKÖK G.

3. Ulusal Tasarım İmalat Ve Analiz Kongresi, Balıkesir, Türkiye, 29 - 30 Kasım 2012, cilt.1, ss.74-89

Eğri kök kanallrında şekillendirme sırasında oluşan streslerin üç boyutlu sonlu elemanlar yöntemi ile değerlendirilmesi

TÜRKAYDIN D., GÜNDAY M., EKİCİ B.

Türk endodonti derneği 11. uluslararsı kongresi, 27 - 28 Nisan 2012