Eğitim Bilgileri
2020 - Devam Ediyor
2020 - Devam EdiyorDoktora
Yıldız Teknik Üniversitesi, Fen Bilimleri Enstitüsü, Mekatronik Mühendisliği, Türkiye
2015 - 2020
2015 - 2020Lisans
İstanbul Medipol Üniversitesi, Hukuk Fakültesi, Hukuk, Türkiye
2010 - 2012
2010 - 2012Yüksek Lisans
Sabancı Üniversitesi, Fen Bilimleri Enstitüsü, Mekatronik Mühendisliği, Türkiye
2005 - 2010
2005 - 2010Lisans
Sabancı Üniversitesi, Mühendislik Ve Doğa Bilimleri Fakültesi, Mekatronik Mühendisliği, Türkiye
Yaptığı Tezler
2012
2012Yüksek Lisans
Structural Health Monitoring of Composite Materials with FBG Sensors: Damage Detection and Remaining Useful Life Prediction
Sabancı Üniversitesi, Fen Bilimleri Enstitüsü, Mekatronik Mühendisliği
Yabancı Diller
C2 Yeterlilik
C2 Yeterlilikİngilizce
Araştırma Alanları
Sistem Dinamiği ve Kontrolü , Robotik , Dinamik Sistemlerin Modellenmesi ve Benzetimi
Akademik Unvanlar / Görevler
2011 - Devam Ediyor
2011 - Devam EdiyorAraştırma Görevlisi
Marmara Üniversitesi, Teknoloji Fakültesi, Mekatronik Mühendisliği Bölümü
Yönetimsel Görevler
2018 - Devam Ediyor
2018 - Devam EdiyorKurucu Ortak - Yönetici
HANEIO TEKNOLOJİ LTD. ŞTİ.
2012 - Devam Ediyor
2012 - Devam EdiyorBölüm Tanıtım ve Mezunlarla İlişkiler Komisyonu Üyesi
Marmara Üniversitesi, Teknoloji Fakültesi, Mekatronik Mühendisliği Bölümü
SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler
2016
2016Prediction of fatigue response of composite structures by monitoring the strain energy release rate with embedded fiber Bragg gratings
KEULEN C. J. , AKAY E., MELEMEZ F., KOCAMAN E., DENİZ A., YILMAZ Ç., et al.
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, cilt.27, sa.1, ss.17-27, 2016 (SCI İndekslerine Giren Dergi)
2012
2012An Experimental Study on the Process Monitoring of Resin Transfer Molded Composite Structures Using Fiber Optic Sensors
YILDIZ M., ÖZDEMİR N. G. , BEKTAŞ G., KEULEN C. J. , BOZ T. , ŞENGÜN F. E. , et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, cilt.134, sa.4, 2012 (SCI İndekslerine Giren Dergi)
Diğer Dergilerde Yayınlanan Makaleler
2020
2020Electronic and Mechanical Design of a Hexapod Land Searching Robot
Boz T. , Aras İ., Kıkıcı S., Ersoy S.
International Advanced Researches and Engineering Journal, cilt.4, sa.1, ss.34-40, 2020 (Diğer Kurumların Hakemli Dergileri)
2020
2020Vertical axis hybrid wind turbine design
TOPTAŞ E. , Bayrak M. A. , BOZ T.
Journal of Mechatronics and Artificial Intelligence in Engineering, 2020 (Diğer Kurumların Hakemli Dergileri)
2013
2013Study of Local and Transient Buckling in Glass Fiber Reinforced Composite Using Fiber Bragg Grating
MELEMEZ F., BOZ T. , CHELLIAH P., BEKTAŞ G., YILDIZ M., ÖZTÜRK C., et al.
Key Engineering Materials, cilt.543, ss.346-351, 2013 (Diğer Kurumların Hakemli Dergileri)
Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar
2015
2015Diesel Engine NOx Emission Modeling with Airpath Input Channels
BOZ T. , ÜNEL M., ARAN V., YILMAZ M., ÇETİN G., BAYBURTLU C., et al.
IECON 2015 - 41ST ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY, Yokohama, Japonya, 9 - 12 Kasım 2015, ss.3382-3387
2015
2015Sistem Tanılama Yöntemleri ile Dizel Motor NOx Emisyonu Modellenmesi
BOZ T. , ÜNEL M., ARAN V., YILMAZ M., ÇETİN G., BAYBURTLU C., et al.
TOK’15: Otomatik Kontrol Ulusal Toplantısı, Denizli, Türkiye, 10 - 12 Eylül 2015
2013
2013Simulation studies of spectral subtraction based temperature compensation of FBG sensor for structural health monitoring based on principal component analysis
CHELLIAH P., DENİZ A., KEULEN C. J. , BEKTAŞ G., BOZ T. , MELEMEZ F., et al.
9th International Workshop on Structural Health Monitoring (IWSHM 2013), STANFORD, Amerika Birleşik Devletleri, 12 - 14 Eylül 2013
2013
2013Simulation Studies of Spectral Subtraction Based Temperature Compensation of FBG Sensor for Structural Health Monitoring
Chelliah P., Deniz A., Keulen C., Bektas G., Boz T. , Melemez F., et al.
9th International Workshop on Structural Health Monitoring (IWSHM), California, Amerika Birleşik Devletleri, 10 - 12 Eylül 2013, ss.478-479
2012
2012Damage detection in composite plates using fiber bragg gratings
BOZ T. , CHELLIAH P., BEKTAŞ G., MELEMEZ F., YILDIZ M., ÖZTÜRK C.
15th European Conference on Composite Materials (ECCM15), VENEDİK, İtalya, 24 - 28 Haziran 2012
2011
2011Fiber Bragg grating and etched optic sensors for flow and cure monitoring of resin transfer molded composite structures
BEKTAŞ G., BOZ T. , KEULEN C. J. , YILDIZ M., ÖZTÜRK C., MENCELOĞLU Y. Z. , et al.
The 18th International Conference on Composite Materials (ICCM18), JEJU ISLAND, Güney Kore, 21 - 26 Ağustos 2011
2011
2011Fatigue monitoring of glass fiber reinforced composite using fiber Bragg grating
MELEMEZ F., BOZ T. , CHELLIAH P., BEKTAŞ G., YILDIZ M., ÖZTÜRK C., et al.
14th International Conference on Advances in Materials Processing Technologies (AMPT-2011), İstanbul, Türkiye, 13 - 16 Temmuz 2011
Desteklenen Projeler
2017 - 2019
2017 - 2019MİKRO- ELEKTRO- MEKANİK- SİSTEMLER (MEMS) TASARIMI ve FABRİKASYON TEKNOLOJİLERİ EĞİTİMLERİ İLE MEMS ÜRETİM ve ARAŞTIRMA FARKINDALIĞININ ARTTIRILMASI PROJESİ
Diğer Resmi Kurumlarca Desteklenen Proje
Akkuş N.(Yürütücü), Boz T. , Ertuğrul İ.
2014 - 2018
2014 - 2018System Identification Methods for Diesel Engine Calibration Process
Diğer Özel Kurumlarca Desteklenen Proje
Ünel M.(Yürütücü)
Bilimsel Dergilerdeki Faaliyetler
2020 - Devam Ediyor
2020 - Devam EdiyorJournal of Mechatronics and Artificial Intelligence in Engineering
Editörler Kurulu Üyesi
Bilimsel Hakemlikler
Haziran 2020
Haziran 2020International Journal of 3D Printing Technologies and Digital Industry
Diğer İndekslerce Taranan Dergi
Akademik Dolaşım Faaliyetleri
2010 - 2010
2010 - 2010Erasmus Programı
Öğrenci Hareketliliği
Malardalens Högskola (University College of Malardalen-Vasteras), İsveç
Burslar
2010 - 2012
2010 - 2012