Biyografi
2016 yılında Marmara Üniversitesi'nde araştırma görevlisi olarak Mühendislik Fakültesi Metalurji ve Malzeme Mühendisliği Üretim Metalurjisi A.B.D.'nda çalışmaya başladı. Aynı yıl aynı bölümde Fen Bilimleri Enstitüsü'nde doktoraya başladı. Halen doktora ve araştırma görevlisi olarak ilgili bölümde çalışmaya devam etmektedir.
Duyurular & Dokümanlar
Dosya İndir
Eğitim Bilgileri
2013 - 2016
2013 - 2016Yüksek Lisans
Dokuz Eylül Üniversitesi, Mühendislik Fakültesi, Metalurji Ve Malzeme Mühendisliği Bölümü, Türkiye
2008 - 2013
2008 - 2013Lisans
Dokuz Eylül Üniversitesi, Mühendislik Fakültesi, Metalurji Ve Malzeme Mühendisliği Bölümü, Türkiye
Yaptığı Tezler
2016
2016Yüksek Lisans
Production of Y(Ta,Nb)O4 Based Implant Dosimetries and Its Development and Application in the Radiotherapy
Dokuz Eylül Üniversitesi, Mühendislik Fakültesi, Metalurji Ve Malzeme Mühendisliği Bölümü
Yabancı Diller
C1 İleri
C1 İleriİngilizce
Araştırma Alanları
Metalurji ve Malzeme Mühendisliği
Akademik Faaliyetlere Dayalı Araştırma Alanları
Avesis Araştırma Alanları
WoS Araştırma Alanları
Scopus Araştırma Alanları
Akademik Ünvanlar / Görevler
2025 - 2026
2025 - 2026Araştırmacı
The University of Birmingham, Mühendislik Fakültesi
2013 - 2016
2013 - 2016Öğrenci
Dokuz Eylül Üniversitesi, Mühendislik Fakültesi, Metalurji Ve Malzeme Mühendisliği Bölümü
Makaleler
Tümü (30)
SCI-E, SSCI, AHCI (29)
SCI-E, SSCI, AHCI, ESCI (29)
Scopus (29)
TRDizin (1)
2026
20261. Machine-learning-guided titanium alloy design for intrinsic grain growth resistance
Demirci S.
Engineering Science and Technology, an International Journal
, cilt.77, 2026 (SCI-Expanded, Scopus)
2026
20262. Predicting grain growth kinetic in steels using machine learning and XAI for mechanical properties
DEMİRCİ S., Şahin D. Ö., Demirci S., TÜNÇAY M. M., Attallah M. M.
PLOS ONE
, cilt.21, sa.1 January, 2026 (SCI-Expanded, Scopus)
2025
20253. Design of the amorphous/crystalline TiO2 nanocomposites via machine learning for photocatalytic applications
DEMİRCİ S., Şahin D. Ö., Demirci S.
Materials Science in Semiconductor Processing
, cilt.192, 2025 (SCI-Expanded, Scopus)
2025
20254. YIG Katkılanmış Hidroksiapatit Kompozitlerinin Üretimi ve Karakterizasyonu
DEMIRCI S.
Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi
, cilt.27, sa.80, ss.284-289, 2025 (TRDizin)
2025
20255. Non-isothermal Kinetic Analysis of High Temperature Oxidation of Additively Manufactured Ti-6Al-4V Alloy
DEMİRCİ S., KIRAN YILDIRIM B., TÜNÇAY M. M., Kaya N., DİKİCİ T.
Journal of Materials Engineering and Performance
, cilt.34, sa.7, ss.5773-5784, 2025 (SCI-Expanded, Scopus)
2025
20256. Optimizing Boride Coating Thickness on Steel Surfaces Through Machine Learning: Development, Validation, and Experimental Insights
DEMİRCİ S., Şahin D. Ö., Demirci S., Gümüş A., TÜNÇAY M. M.
Applied Sciences (Switzerland)
, cilt.15, sa.5, 2025 (SCI-Expanded, Scopus)
2025
20257. Growth kinetics of the borided 316L stainless steel obtained by selective laser 选择性激光熔化制备硼化316L 不锈钢的生长动力学
DEMİRCİ S., TÜNÇAY M. M.
Journal of Central South University
, 2025 (SCI-Expanded, Scopus)
2025
20258. Surface engineering of additively manufactured Ti-6Al-4V alloys: A comparative study on micro/nanoscale topographies for biomedical applications
DEMİRCİ S., TÜNÇAY M. M.
Materials Today Communications
, cilt.42, 2025 (SCI-Expanded, Scopus)
2024
20249. Nanoindentation and Corrosion Behavior of Additively Manufactured Ti-6Al-4V Alloy for Biomaterial Applications
DEMİRCİ S., DİKİCİ T., DALMIŞ R.
Journal of Materials Engineering and Performance
, cilt.33, sa.5, ss.2133-2145, 2024 (SCI-Expanded, Scopus)
2022
202210. Production of Zn-doped TiO2 film with enhanced photocatalytic activity
DİKİCİ T., YILMAZ O., Akalin A., DEMİRCİ S., GÜLTEKİN S., YILDIRIM S., et al.
JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY
, cilt.58, sa.5, ss.1415-1421, 2022 (SCI-Expanded, Scopus)
2022
202211. Investigation of surface-modified EBM printed Ti-6Al-4V alloys for biomedical applications
DEMİRCİ S., DİKİCİ T., TÜNÇAY M. M., DALMIŞ R., KAYA N., Kanbur K., et al.
SURFACES AND INTERFACES
, cilt.34, 2022 (SCI-Expanded, Scopus)
2022
202212. Influence of electrolyte composition on the microstructure and photocatalytic activity of TiO2 nanostructures
YILMAZ O., Ebeoglugil F., DEMİRCİ S., DİKİCİ T.
JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY
, cilt.58, sa.1, ss.123-133, 2022 (SCI-Expanded, Scopus)
2022
202213. Micro/Nanoscale Surface Modification of Ti6Al4V Alloy for Implant Applications
DEMİRCİ S., DİKİCİ T., GÜLLÜOĞLU A. N.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
, cilt.31, sa.2, ss.1503-1511, 2022 (SCI-Expanded, Scopus)
2021
202114. Effect of surface modifications of additively manufactured Ti-6Al-4V alloys on apatite formation ability for biomedical applications
DEMİRCİ S., DALMIŞ R., DİKİCİ T., TÜNÇAY M. M., KAYA N., GÜLLÜOĞLU A. N.
JOURNAL OF ALLOYS AND COMPOUNDS
, cilt.887, 2021 (SCI-Expanded, Scopus)
2021
202115. Photocatalytic activity of the thermally oxidized Zn-Ni-, Zn-Co-, Ni-Co-, and Zn-Ni-Co-coated alloy films
DEMİRCİ S., DİKİCİ T., YURDDAŞKAL M.
JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY
, cilt.57, sa.5, ss.1531-1539, 2021 (SCI-Expanded, Scopus)
2021
202116. Synthesis, characterization, thermal, and antibacterial activity studies on MgO powders
DEMİRCİ S., Yildirim B., TÜNÇAY M. M., KAYA N., GÜLLÜOĞLU A. N.
JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY
, cilt.99, sa.3, ss.576-588, 2021 (SCI-Expanded, Scopus)
2021
202117. Effect of heating rate on structure, morphology and photocatalytic properties of TiO2 particles: thermal kinetic and thermodynamic studies
Dikici T., Demirci S., Tünçay M. M., Kıran Yıldırım B., Kaya N.
JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY
, cilt.97, sa.3, ss.622-637, 2021 (SCI-Expanded, Scopus)
2020
202018. A study of heating rate effect on the photocatalytic performances of ZnO powders prepared by sol-gel route: Their kinetic and thermodynamic studies
DEMİRCİ S., Dikici T., TÜNÇAY M. M., KAYA N.
APPLIED SURFACE SCIENCE
, cilt.507, 2020 (SCI-Expanded, Scopus)
2019
201919. Boosting optical performance of polymer embedded phosphors using iodine-free and iodine-decorated sol-gel synthesized α-Fe2O3
Yildirim B., ERTEKİN K., DEMİRCİ S., Gultekin S.
Optical Materials
, cilt.95, 2019 (SCI-Expanded, Scopus)
2019
201920. Influence of thermal oxidation temperature on the microstructure and photoelectrochemical properties of ZnO nanostructures fabricated on the zinc scraps
Dikici T., Demirci S.
JOURNAL OF ALLOYS AND COMPOUNDS
, cilt.779, ss.752-761, 2019 (SCI-Expanded, Scopus)
2018
201821. Fabrication and characterization of novel iodine doped hollow and mesoporous hematite (Fe2O3) particles derived from sol-gel method and their photocatalytic performances
DEMİRCİ S., YURDDAŞKAL M., Dikici T., Sanoglu C.
JOURNAL OF HAZARDOUS MATERIALS
, cilt.345, ss.27-37, 2018 (SCI-Expanded, Scopus)
2017
201722. The effects of growth conditions on the surface properties and photocatalytic activities of anatase TiO2 films prepared via electrochemical anodizing and annealing methods
Dikici T., YURDDAŞKAL M., DEMİRCİ S., ÇELİK E.
JOURNAL OF POROUS MATERIALS
, cilt.24, sa.6, ss.1535-1544, 2017 (SCI-Expanded, Scopus)
2017
201723. High temperature thermopower of sol-gel processed Zn1-x-y Al (x) Me (y) O (Me: Ga, In)
KILINÇ E., DEMİRCİ S., UYSAL F., ÇELİK E., KURT H.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
, cilt.28, sa.16, ss.11769-11778, 2017 (SCI-Expanded, Scopus)
2017
201724. Fast and low-cost fabrication of 1D hematite photoanode in pure water vapor and air atmosphere: Investigation the effect of the oxidation atmosphere on the PEC performance of the hematite photoanodes
DEMİRCİ S., SARIOĞLU C.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
, cilt.42, sa.16, ss.11139-11149, 2017 (SCI-Expanded, Scopus)
2017
201725. Production, characterization, and luminescent properties of Eu3+ doped yttrium niobate-tantalate films
YILDIRIM S., DEMİRCİ S., ERTEKİN K., ÇELİK E., Alicikus Z. A.
JOURNAL OF ADVANCED CERAMICS
, cilt.6, sa.1, ss.33-42, 2017 (SCI-Expanded, Scopus)
2017
201726. Enhanced photocatalytic activity of micro/nano textured TiO2 surfaces prepared by sandblasting/acid-etching/anodizing process
Dikici T., DEMİRCİ S., EROL M.
JOURNAL OF ALLOYS AND COMPOUNDS
, cilt.694, ss.246-252, 2017 (SCI-Expanded, Scopus)
2016
201627. Synthesis and characterization of Ag doped TiO2 heterojunction films and their photocatalytic performances
DEMİRCİ S., Dikici T., YURDDAŞKAL M., Gultekin S., TOPARLI M., ÇELİK E.
APPLIED SURFACE SCIENCE
, cilt.390, ss.591-601, 2016 (SCI-Expanded, Scopus)
2016
201628. Sol-gel synthesized Sr4Al14O25:Eu2+/Dy3+ blue-green phosphorous as oxygen sensing materials
AYDIN İ., ERTEKİN K., DEMİRCİ S., GÜLTEKİN S., ÇELİK E.
OPTICAL MATERIALS
, cilt.62, ss.285-296, 2016 (SCI-Expanded, Scopus)
2015
201529. Synthesis and comparison of the photocatalytic activities of flame spray pyrolysis and sol-gel derived magnesium oxide nano-scale particles
DEMİRCİ S., Ozturk B., Yildirim S., Bakal F., Erol M., Sancakoglu O., et al.
MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING
, cilt.34, ss.154-161, 2015 (SCI-Expanded, Scopus)
2015
201530. Synthesis and spectral characterization of Sr4Al14O25:Eu2+/Dy3+ blue-green phosphorous powders by sol-gel method
Demirci S., Gültekin S., Akalın S. A., Öter Ö., Ertekin K., Çelik E.
MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING
, cilt.31, ss.611-617, 2015 (SCI-Expanded, Scopus)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler
2024
20241. IN VITRO CORROSION BEHAVIOR OF DLC-COATED ADDITIVE MANUFACTURED TI64 ALLOY: A CASE STUDY
ÇINAR Ö., TÜNÇAY M. M., DEMİRCİ S.
8th INTERNATIONAL CONGRESS ON ENGINEERING SCIENCES AND MULTIDISCIPLINARY APPROACHES, 7 - 08 Aralık 2024, (Özet Bildiri)
2024
20242. Thermally tuning the crystal structure of nanomaterials
DEMİRCİ S.
EFES INTERNATIONAL SCIENTIFIC RESEARCH AND INNOVATION CONGRESS, İzmir, Türkiye, 15 Eylül 2024, (Özet Bildiri)
2022
20223. Phase Engineering of Semiconductor Nanoscale Materials
DEMİRCİ S., TÜNÇAY M. M.
21th International Metallurgy and Materials Congress, İstanbul, Türkiye, 06 Ekim 2022, (Tam Metin Bildiri)
2020
20204. PRODUCTION AND CHARACTERIZATION OF BIOGLASS-YIG CERAMIC COMPOSITE
DEMİRCİ S., ÇINAR Ö., ÇETİNER B. N., TÜNÇAY M. M., GÜLLÜOĞLU A. N.
6.ULUSLARARASI MUHENDİSLİK MİMARLIK VE TASARIM KONGRESİ, İstanbul, Türkiye, 17 - 18 Aralık 2020, (Özet Bildiri)
2018
20185. EFFECT OF THERMAL OXIDATION ATMOSPHERE ON PHOTOELECTROCHEMICAL (PEC) WATER SPLITTING OF HEMATITE PRODUCED FROM ELECTRODEPOSITED Fe FILM
DEMİRCİ S., TÜNÇAY M. M., DİKİCİ T., SARIOĞLU C.
19th International Metallurgy and Materials Congress, 25 - 27 Ekim 2018, (Tam Metin Bildiri)
2017
20176. Photocatalytic performance of the iodine doped hollow and mesoporous hematite (Fe2O3) structure synthesized via sol-gel process
DEMİRCİ S., YURDDAŞKAL M., DİKİCİ T., SARIOĞLU C.
3rd International Porous and Powder Materials Symposium and Exhibition (PPM), Aydın, Türkiye, 12 - 15 Eylül 2017, (Özet Bildiri)
2017
20177. Investigation the effect of annealing atmosphere and time on photoelectrochemical (PEC) properties of ɑ-Fe2O3 photoanode
DEMİRCİ S., SARIOĞLU C.
2nd International Hydrogen Technologies Congress, Adana, Türkiye, 15 - 18 Mart 2017, (Özet Bildiri)
2015
20158. Thermoelectric Module using p and n type Oxide Thermoelectric Materials
KILINÇ E., DEMİRCİ S., UYSAL F., ÇELİK E., KURT H.
3rd International Symposium on Innovative Technologies in Engineering and Science, Valensiya, İspanya, 3 - 05 Haziran 2015, (Tam Metin Bildiri)