Dr. Öğr. Üyesi PARVIZ ASADI

1. Influence of pin thread on particle distribution in the FSP using the CEL method

Akbari M., ASADI P., Moghanian A., Hassanzadeh E.

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications , cilt.240, sa.1, ss.94-108, 2026 (SCI-Expanded, Scopus)

2. A comprehensive review on advancements in laser-assisted dental treatments: focus on minimally invasive techniques and clinical outcomes

Safaee S., Moghanian A., Mehrdar M., ASADI P., Akbari M., Nesabi M., et al.

Lasers in Medical Science , cilt.40, sa.1, 2025 (SCI-Expanded)

3. Improving Bioactivity and Corrosion Resistance of Laser-Powder-Bed-Fused Ti6Al4V with Hydroxyapatite and Titanium Oxide Nanocomposite Coatings Applied by Electrophoretic Deposition

Sohrabpoor H., Salarvand V., Torabpour M., Yazdi M. S., ASADI P., Brabazon D., et al.

Journal of Materials Engineering and Performance , cilt.34, sa.18, ss.20459-20473, 2025 (SCI-Expanded)

4. Incorporation of machine learning in the design of bio-nanocomposites produced by DLP 3D printer

Maleki H., Asadi P., Akbari M., Peyghami M., Salarvand V., Bedir F.

Results in Engineering , cilt.27, 2025 (ESCI)

5. Multi-layered coatings for improving implant performance of titanium

Safaee S., Abe S., Nesabi M., Moghanian A., ASADI P., Yoshida K., et al.

Ceramics International , cilt.51, sa.20, ss.32108-32125, 2025 (SCI-Expanded, Scopus)

6. Impact of flat-surfaced pins on material flow and particle distribution in friction stir processing: a CEL method analysis

Akbari M., ASADI P., Abdollahzadeh A., Esfandiar M., Moghanian A.

Physica Scripta , cilt.100, sa.7, 2025 (SCI-Expanded)

7. New trends in 3D and 4D printed dental and orthopedic Implants: Methods, applications and future directions

Moghanian A., ASADI P., Akbari M., Mohammad Aliha M. R., Kizilkurtlu A. A., AKPEK A., et al.

Bioprinting , cilt.48, 2025 (Scopus)

8. Recent advances in friction stir welding/processing tools

Akbari M., DebRoy T., ASADI P., Sadowski T.

Journal of Manufacturing Processes , cilt.142, ss.99-156, 2025 (SCI-Expanded, Scopus)

9. Friction stir extrusion: Parametrical optimization for improved Al–Si aluminum tube production

Akbari M., ASADI P., Bedir F., Choupani N.

International Journal of Lightweight Materials and Manufacture , cilt.8, sa.2, ss.182-193, 2025 (Scopus)

10. Process Parameters and Tool Design in Friction Stir Extrusion: A Sustainable Recycling Technique

Akbari M., ASADI P., Behnagh R. A., Bedir F., Choupani N., Sadowski T.

Engineering Reports , cilt.7, sa.1, 2025 (ESCI)

11. Hybrid PLA-based biocomposites produced by DLP 3D printer with alumina and silica nanoparticles

Maleki H., ASADI P., Moghanian A., Safaee S., Najjar I., Fathy A.

Materials Today Communications , cilt.42, 2025 (SCI-Expanded)

12. Enhancing corrosion resistance of AISI 4130 steel through optimized HVOF tungsten carbide coatings

Moghanian A., Mohammadi M. A., Ansari J., ASADI P., Akbari M., Yazdi M. S., et al.

Results in Surfaces and Interfaces , cilt.18, 2025 (Scopus)

13. Examining the impact of tool taper angle in Al-Si tube manufacturing by friction stir extrusion

ASADI P., Akbari M., Sadowski T., Asl Y. D., Choupani N., Bedir F.

Journal of Manufacturing Processes , cilt.131, ss.532-544, 2024 (SCI-Expanded)

14. Effects of triflute pin geometry on defect formation and material flow in FSW using CEL approach

Akbari M., ASADI P.

Journal of Advanced Joining Processes , cilt.10, 2024 (ESCI, Scopus)

15. (Alumina and graphene)/ PLA nanocomposites manufactured by digital light processing 3D printer

Maleki H., ASADI P., Sedghi A., Choupani N., Moghanian A., Elamy M. I.

Journal of Materials Research and Technology , cilt.32, ss.3120-3134, 2024 (SCI-Expanded)

16. Fracture toughness determination for epoxy-based polymer concrete mixtures: Applicability of different rectangular beam and circular disc specimens

Aliha M., Kouchaki H., Mohammadi M., Haghighatpour P., Choupani N., ASADI P., et al.

Composites Part C: Open Access , cilt.14, 2024 (Scopus)

17. Friction stir extrusion and mechanical alloying of LM13 casting ingot to produce LM28 tubes

Talebi M., ASADI P., Akbari M.

Journal of Materials Research and Technology , cilt.27, ss.6672-6687, 2023 (SCI-Expanded)

18. Recycling of brass chips by sustainable friction stir extrusion

ASADI P., Akbari M., Armani A., Aliha M., Peyghami M., Sadowski T.

Journal of Cleaner Production , cilt.418, 2023 (SCI-Expanded, Scopus)

19. A Review on Friction Stir Welding/Processing: Numerical Modeling

Akbari M., ASADI P., Sadowski T.

Materials , cilt.16, sa.17, 2023 (SCI-Expanded, Scopus)

20. MODELING AND OPTIMIZATION OF PROCESS PARAMETERS OF THE PISTON ALLOY-BASED COMPOSITE PRODUCED BY FSP USING RESPONSE SURFACE METHODOLOGY

Akbari M., ASADI P., Aliha M., Berto F.

Surface Review and Letters , cilt.30, sa.6, 2023 (SCI-Expanded)

21. Production of LM28 Tubes by Mechanical Alloying and Using Friction Stir Extrusion

ASADI P., Akbari M., Talebi M., Peyghami M., Sadowski T., Aliha M. R. M.

Crystals , cilt.13, sa.5, 2023 (SCI-Expanded, Scopus)

22. Multivariate optimization of mechanical and microstructural properties of welded joints by FSW method

ASADI P., Aliha M., Akbari M., Imani D., Berto F.

Engineering Failure Analysis , cilt.140, 2022 (SCI-Expanded)

23. INVESTIGATION OF WEAR AND MICROSTRUCTURAL PROPERTIES OF A356/ TiC COMPOSITES FABRICATED BY FSP

Akbari M., ASADI P., Asiabaraki H. R.

Surface Review and Letters , cilt.29, sa.10, 2022 (SCI-Expanded, Scopus)

24. Modeling of pin shape effects in bobbin tool FSW

ASADI P., Mirzaei M., Akbari M.

International Journal of Lightweight Materials and Manufacture , cilt.5, sa.2, ss.162-177, 2022 (Scopus)

25. Investigation of the effect of tool probe profile on reinforced particles distribution using experimental and CEL approaches

Akbari M., Ezzati M., ASADI P.

International Journal of Lightweight Materials and Manufacture , cilt.5, sa.2, ss.213-223, 2022 (Scopus)

26. Effects of different cooling conditions on friction stir processing of A356 alloy: Numerical modeling and experiment

Akbari M., ASADI P.

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science , cilt.236, sa.8, ss.4133-4146, 2022 (SCI-Expanded)

27. Characterization of the Influence of Rotational and Traverse Speeds on the Mechanical and Microstructural Properties of Wires Produced By the FSBE Method

ASADI P., Akbari M., Kohantorabi O., Peyghami M., Aliha M., Salehi S., et al.

Strength of Materials , cilt.54, sa.2, ss.318-330, 2022 (SCI-Expanded)

28. Simulation and experimental investigation of multi-walled carbon nanotubes/aluminum composite fabrication using friction stir processing

Akbari M., ASADI P.

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering , cilt.235, sa.6, ss.2165-2179, 2021 (SCI-Expanded)

29. Optimization of microstructural and mechanical properties of brass wire produced by friction stir extrusion using Taguchi method

Akbari M., ASADI P.

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications , cilt.235, sa.12, ss.2709-2719, 2021 (SCI-Expanded)

30. Numerical modeling and experimental investigation of brass wire forming by friction stir back extrusion

ASADI P., Akbari M.

International Journal of Advanced Manufacturing Technology , cilt.116, sa.9-10, ss.3231-3245, 2021 (SCI-Expanded)

31. Material flow modeling for the DSFSW of magnesium alloy

ASADI P., Mirzaei M.

Journal of Strain Analysis for Engineering Design , cilt.56, sa.5, ss.275-290, 2021 (SCI-Expanded)

32. Numerical investigation on the effect of welding speed and heat input on the residual stress of multi-pass TIG welded stainless steel pipe

ASADI P., Alimohammadi S., Kohantorabi O., Soleymani A., Fazli A.

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture , cilt.235, sa.6-7, ss.1007-1021, 2021 (SCI-Expanded)

33. Modeling of material flow in dissimilar friction stir lap welding of aluminum and brass using coupled Eulerian and Lagrangian method

Akbari M., ASADI P., Behnagh R. A.

International Journal of Advanced Manufacturing Technology , cilt.113, sa.3-4, ss.721-734, 2021 (SCI-Expanded)

34. Formability study and metallurgical properties analysis of FSWed AA 6061 blank by the SPIF process

Tayebi P., Fazli A., ASADI P., Soltanpour M.

SN Applied Sciences , cilt.3, sa.3, 2021 (ESCI)

35. Effect of Tool Pin Profile on Material Flow in Double Shoulder Friction Stir Welding of AZ91 Magnesium Alloy

Mirzaei M., ASADI P., Fazli A.

International Journal of Mechanical Sciences , cilt.183, 2020 (SCI-Expanded)

36. Dissimilar friction stir lap welding of aluminum to brass: Modeling of material mixing using coupled Eulerian–Lagrangian method with experimental verifications

Akbari M., ASADI P.

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications , cilt.234, sa.8, ss.1117-1128, 2020 (SCI-Expanded)

37. Effects of material type, preheating and weld pass number on residual stress of welded steel pipes by multi-pass TIG welding (C-Mn, SUS304, SUS316)

ASADI P., Alimohammadi S., Kohantorabi O., Fazli A., Akbari M.

Thermal Science and Engineering Progress , cilt.16, 2020 (Scopus)

38. Formation of thermo-mechanically affected zone in friction stir welding

Zolghadr P., Akbari M., ASADI P.

Materials Research Express , cilt.6, sa.8, 2019 (SCI-Expanded)

39. Wear and mechanical properties of surface hybrid metal matrix composites on Al–Si aluminum alloys fabricated by friction stir processing

Akbari M., Shojaeefard M. H., ASADI P., Khalkhali A.

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications , cilt.233, sa.5, ss.790-799, 2019 (SCI-Expanded)

40. Formability analysis of dissimilar friction stir welded AA 6061 and AA 5083 blanks by SPIF process

Tayebi P., Fazli A., ASADI P., Soltanpour M.

CIRP Journal of Manufacturing Science and Technology , cilt.25, ss.50-68, 2019 (SCI-Expanded)

41. Optimization of microstructural and mechanical properties of friction stir welded A356 pipes using Taguchi method

Akbari M., ASADI P.

Materials Research Express , cilt.6, sa.6, 2019 (SCI-Expanded)

42. Effect of tool pin profile on distribution of reinforcement particles during friction stir processing of B4C/aluminum composites

Shojaeefard M. H., Akbari M., Khalkhali A., ASADI P.

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications , cilt.232, sa.8, ss.637-651, 2018 (SCI-Expanded, Scopus)

43. Multicriteria optimization of mechanical properties of aluminum composites reinforced with different reinforcing particles type

Akbari M., ASADI P., Zolghadr P., Khalkhali A.

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering , cilt.232, sa.3, ss.323-337, 2018 (SCI-Expanded)

44. Hybrid multi-objective optimization of microstructural and mechanical properties of B4C/A356 composites fabricated by FSP using TOPSIS and modified NSGA-II

AKBARI M., SHOJAEEFARD M. H., ASADI P., KHALKHALI A.

Transactions of Nonferrous Metals Society of China (English Edition) , cilt.27, sa.11, ss.2317-2333, 2017 (SCI-Expanded, Scopus)

45. Wear Performance of A356 Matrix Composites Reinforced with Different Types of Reinforcing Particles

Akbari M., Shojaeefard M. H., ASADI P., Khalkhali A.

Journal of Materials Engineering and Performance , cilt.26, sa.9, ss.4297-4310, 2017 (SCI-Expanded, Scopus)

46. The effect of reinforcement type on the microstructure, mechanical properties, and wear resistance of A356 matrix composites produced by FSP

Shojaeefard M. H., Akbari M., ASADI P., Khalkhali A.

International Journal of Advanced Manufacturing Technology , cilt.91, sa.1-4, ss.1391-1407, 2017 (SCI-Expanded, Scopus)

47. A cellular automaton model for microstructural simulation of friction stir welded AZ91 magnesium alloy

Akbari M., ASADI P., Givi M. B., Zolghadr P.

Modelling and Simulation in Materials Science and Engineering , cilt.24, sa.3, 2016 (SCI-Expanded)

48. Simulation of dynamic recrystallization process during friction stir welding of AZ91 magnesium alloy

ASADI P., Givi M. K. B., Akbari M.

International Journal of Advanced Manufacturing Technology , cilt.83, sa.1-4, ss.301-311, 2016 (SCI-Expanded)

49. Optimization of AZ91 friction stir welding parameters using Taguchi method

ASADI P., Akbari M., Givi M. K. B., Panahi M. S.

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications , cilt.230, sa.1, ss.291-302, 2016 (SCI-Expanded)

50. Microstructural simulation of friction stir welding using a cellular automaton method: A microstructure prediction of AZ91 magnesium alloy

ASADI P., Givi M. K. B., Akbari M.

International Journal of Mechanical and Materials Engineering , cilt.10, sa.1, 2015 (Scopus)

51. Investigation of friction stir welding tool parameters using FEM and neural network

Shojaeefard M. H., Khalkhali A., Akbari M., ASADI P.

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications , cilt.229, sa.3, ss.209-217, 2015 (SCI-Expanded, Scopus)

52. Optimization of microstructural and mechanical properties of friction stir welding using the cellular automaton and Taguchi method

Shojaeefard M. H., Akbari M., Khalkhali A., ASADI P., Parivar A. H.

Materials and Design , cilt.64, ss.660-666, 2014 (SCI-Expanded)

53. Multi objective optimization of friction stir welding parameters using FEM and neural network

Shojaeefard M. H., Akbari M., ASADI P.

International Journal of Precision Engineering and Manufacturing , cilt.15, sa.11, ss.2351-2356, 2014 (SCI-Expanded)

54. Preface

Givi M. K. B., ASADI P.

Advances in Friction-Stir Welding and Processing , 2014 (Scopus)

55. Characterization of the Influence of Tool Pin Profile on Microstructural and Mechanical Properties of Friction Stir Welding

Marzbanrad J., Akbari M., ASADI P., Safaee S.

Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science , cilt.45, sa.5, ss.1887-1894, 2014 (SCI-Expanded)

56. Influence of aging treatment on in-situ electrical resistance variation during aging of nickel-rich NiTi shape memory wires

Kazemi-Choobi K., Khalil-Allafi J., Elhami A., ASADI P.

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science , cilt.44, sa.10, ss.4429-4433, 2013 (SCI-Expanded)

57. Core modifications of sandwich panels fabricated by vacuum-assisted resin transfer molding

Halimi F., Golzar M., ASADI P., Beheshty M.

Journal of Composite Materials , cilt.47, sa.15, ss.1853-1863, 2013 (SCI-Expanded)

58. On the role of cooling and tool rotational direction on microstructure and mechanical properties of friction stir processed AZ91

ASADI P., Besharati Givi M., Parvin N., Araei A., Taherishargh M., Tutunchilar S.

International Journal of Advanced Manufacturing Technology , cilt.63, sa.9-12, ss.987-997, 2012 (SCI-Expanded)

59. Predicting the grain size and hardness of AZ91/SiC nanocomposite by artificial neural networks

ASADI P., Givi M. K. B., Rastgoo A., Akbari M., Zakeri V., Rasouli S.

International Journal of Advanced Manufacturing Technology , cilt.63, sa.9-12, ss.1095-1107, 2012 (SCI-Expanded, Scopus)

60. Simulation of material flow in friction stir processing of a cast Al-Si alloy

Tutunchilar S., Haghpanahi M., Besharati Givi M., ASADI P., Bahemmat P.

Materials and Design , cilt.40, ss.415-426, 2012 (SCI-Expanded, Scopus)

61. Eutectic Al-Si piston alloy surface transformed to modified hypereutectic alloy via FSP

Tutunchilar S., Besharati Givi M., Haghpanahi M., ASADI P.

Materials Science and Engineering: A , cilt.534, ss.557-567, 2012 (SCI-Expanded)

62. Effects of SiC particle size and process parameters on the microstructure and hardness of AZ91/SiC composite layer fabricated by FSP

ASADI P., Givi M. K. B., Abrinia K., Taherishargh M., Salekrostam R.

Journal of Materials Engineering and Performance , cilt.20, sa.9, ss.1554-1562, 2011 (SCI-Expanded, Scopus)

63. Characterization of AZ91/alumina nanocomposite produced by FSP

Faraji G., ASADI P.

Materials Science and Engineering: A , cilt.528, sa.6, ss.2431-2440, 2011 (SCI-Expanded)

64. Investigation of mechanical properties of Cu/SiC composite fabricated by FSP: Effect of SiC particles' size and volume fraction

Barmouz M., ASADI P., Besharati Givi M., Taherishargh M.

Materials Science and Engineering: A , cilt.528, sa.3, ss.1740-1749, 2011 (SCI-Expanded, Scopus)

65. Experimental investigation of magnesium-base nanocomposite produced by friction stir processing: Effects of particle types and number of friction stir processing passes

ASADI P., Faraji G., Masoumi A., Givi M. B.

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science , cilt.42, sa.9, ss.2820-2832, 2011 (SCI-Expanded, Scopus)

66. Effect of SiC volume fraction on the microstructural and mechanical properties of Cu/SiC composite layer fabricated by FSP

ASADI P., Besharati Givi M. K., Barmouz M.

Defect and Diffusion Forum , cilt.312-315, ss.500-505, 2011 (Scopus)

Yayınlar & Eserler

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (Scopus)

H-İndeks (Scopus)

Atıf (Scholar)

H-İndeks (Scholar)

Açık Erişim