Assoc. Prof.

MUSTAFA KEMAL BİLİCİ


School of Applied Sciences

Jewelery and Jewelery Design

Department of Jewelery and Jewelery Design

Biography

1976 yılında Şavşat’ta doğdu. İlk, orta ve lise eğitimini İnegöl’de tamamladıktan sonra,  1997 yılında Dokuz Eylül Üniversitesi İzmir Meslek Yüksekokulundan, 2001 yılında Marmara Üniversitesi Teknik Eğitim Fakültesi Metal Eğitimi Bölümü’nden mezun oldu. 2004 yılında Yüksek Lisans, 2011’da Doktora derecesi aldı. Marmara Üniversitesi Teknik Eğitim Fakültesinde 2002 yılında Araştırma Görevlisi olarak göreve başladıktan sonra, 2014 yılında Yardımcı Doçent, 2017 Nisan döneminde Doçent oldu. Halen Uygulamalı Bilimler Yüksekokulu Kuyumculuk ve Mücevherat Tasarımı Bölümünde Doçent olarak görev yapmaktadır.

Ulusal ve Uluslararası dergilerde yayınlanmış 40’ın üzerinde çalışması  bulunmakta olup yayınlarına yaklaşık 550 atıf almıştır. 

Education Information

2004 - 2011

2004 - 2011

Doctorate

Marmara University, Faculty of Technical Education, Metal Education, Turkey

2001 - 2004

2001 - 2004

Post Graduate

Marmara University, Faculty of Technical Education, Metal Education, Turkey

1997 - 2001

1997 - 2001

Under Graduate

Marmara University, Faculty of Technical Education, Metal Education, Turkey

1995 - 1997

1995 - 1997

Associate Degree

Dokuz Eylul University, İzmir Vocatıonal School, Department Of Mechanıcal And Metal Technologıes, Turkey

Dissertations

2011

2011

Doctorate

Polietilenin sürtünme karıştırma nokta kaynak özellikleri

Marmara Üniversitesi, Teknik Eğitim Fakültesi, Metal Eğitimi Bölümü

2004

2004

Post Graduate

Alaşımsız dökme demirlerin aşınma özelliği

Marmara Üniversitesi, Teknik Eğitim Fakültesi, Metal Eğitimi Bölümü

Certificates, Courses and Trainings

2012

2012

SolildWorks

Vocational Training

Yenasoft

Research Areas

Construction and Manufacturing, Joining and Cutting, Engineering and Technology

Academic Titles / Tasks

2017 - Continues

2017 - Continues

Associate Professor

Marmara University, School Of Applied Sciences, Jewelery And Jewelery Design

2014 - 2017

2014 - 2017

Assistant Professor

Marmara University, School of Applied Sciences, Jewelery and Jewelery Design

2011 - 2014

2011 - 2014

Research Assistant PhD

Marmara University, Faculty of Technical Education, Metal Education

2002 - 2011

2002 - 2011

Research Assistant

Marmara University, Faculty Of Technical Education, Metal Education

Managerial Experience

2019 - Continues

2019 - Continues

Head of Department

Marmara University, Faculty of Technical Education, Metal Education

2015 - Continues

2015 - Continues

Mevlana Exchange Program Coordinator

Marmara University, School of Applied Sciences, Jewelery and Jewelery Design

2014 - Continues

2014 - Continues

University Executive Board Member

Marmara University, School of Applied Sciences, Jewelery and Jewelery Design

Courses

Under Graduate

Under Graduate

Technical Drawing

Under Graduate

Under Graduate

Materials Science II

Under Graduate

Under Graduate

Technical Drawing

Associate Degree

Associate Degree

Manufacturing Process II

Under Graduate

Under Graduate

Technical Drawing II

Under Graduate

Under Graduate

Computer Aided Technical Drawing

Under Graduate

Under Graduate

Temel İşlem Teknolojileri ve Uygulamaları

Associate Degree

Associate Degree

CNC Technology

Under Graduate

Under Graduate

Teknik Resim

Under Graduate

Under Graduate

Materials Science I

Under Graduate

Under Graduate

Talaşlı Üretim Teknolojileri ve Uygulamaları

Under Graduate

Under Graduate

Technical Drawing I

Under Graduate

Under Graduate

Plastic Forming Technique to Metals

Taught Courses And Trainings

2019 - 2019

2019 - 2019

Teknik Resim Okuma

Application Research Center - Training

Bilici M. K.

2018 - 2018

2018 - 2018

Ölçme Tekniği

Application Research Center - Training

Bilici M. K.

Articles Published in Journals That Entered SCI, SSCI and AHCI Indexes

2021

2021

Investigation of Factors Affecting Friction Stir Welding of Polyethylene by ANOVA Analysis

Bilici M. K. , Kartal İ. , Kurtulmuş M.

Materials Science-Medziagotyra, vol.27, no.3, pp.1-12, 2021 (Journal Indexed in SCI Expanded) Creative Commons License

2019

2019

Investigation of wear behavior of Ti-6Al-4V/CNT composites reinforced with carbon nanotubes

Topcu I., Güllüoğlu A. N. , Bilici M. K. , Gülsoy H. Ö.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, vol.34, pp.1442-1449, 2019 (Journal Indexed in SCI) Creative Commons License identifier identifier

2012

2012

Effect of tool geometry on friction stir spot welding of polypropylene sheets

Bilici M. K.

EXPRESS POLYMER LETTERS, vol.6, no.10, pp.805-813, 2012 (Journal Indexed in SCI) identifier identifier

Articles Published in Other Journals

2018

2018

The Optimization of Welding Tool Material and Welding Parameters in Friction Stir Spot Welding of Plastics Using Taguchi Experimental Design

Bilici M. K. , Yükler A. İ. , Kurtulmuş M. , Kaştan A.

International Journal of Engineering Science and Application, vol.2, pp.47-53, 2018 (Refereed Journals of Other Institutions) Creative Commons License

2017

2017

Friction Stir Welded of High Density Polyethylene Sheets

BİLİCİ M. K. , KURT M. B. , KURT H.

Journal of Scientific and Engineering Research, vol.4, no.9, pp.363-370, 2017 (Refereed Journals of Other Institutions)

2017

2017

Activated Flux TIG Welding of Austenitic Stainless Steels.

Çatalgöl Z., Çalış İ., Kurtulmuş M. , Bilici M. K.

Journal of Scientific and Engineering Research, vol.4, pp.169-177, 2017 (Refereed Journals of Other Institutions)

2016

2016

Influence of Tool Pin Geometry in Friction Stir Spot Welded Polymer Sheets

BİLİCİ M. K. , YÜKLER A. İ. , KURTULMUŞ M.

Journal of Scientific and Engineering Research, vol.3, pp.15-22, 2016 (Refereed Journals of Other Institutions)

2016

2016

Effect of Subsequent Aging on Wear Behaviour of SiCp Reinforced AA2124 Aluminum Metal Matrix Composite

Bozkurt Y. , Bilici M. K. , Salman S. , Gülsoy H. Ö.

Journal of Scientific and Engineering Research, vol.3, pp.34-40, 2016 (Refereed Journals of Other Institutions)

2016

2016

Pin profile and shoulder geometry effects in friction stir spot welded polymer sheets

BİLİCİ M. K. , YÜKLER A. İ. , KURTULMUŞ M.

The Internatinol Journal of Engineering and Science, vol.5, pp.29-36, 2016 (Refereed Journals of Other Institutions)

2016

2016

Taguchi analysis of dissimilar aluminum sheets joined by friction stir spot welding

Bilici M. K. , Bakır B. , Bozkurt Y. , Calis I.

PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI, vol.22, pp.17-23, 2016 (Journal Indexed in ESCI) identifier

2016

2016

Sürtünme karıştırma nokta kaynak tekniği ile birleştirilen farklı alüminyum levhaların taguchi analizi

ÇALIŞ İ., BİLİCİ M. K. , BAKIR B. , BOZKURT Y.

Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, vol.22, no.1, pp.17-23, 2016 (Other Refereed National Journals)

2015

2015

EFFECTS OF WELDING CURRENT AND ARC VOLTAGE ON FCAW WELD BEAD GEOMETRY

KURTULMUŞ M. , YÜKLER A. İ. , BİLİCİ M. K. , ÇATALGÖL Z.

International Journal of Research in Engineering and Technology, vol.4, pp.23-28, 2015 (Refereed Journals of Other Institutions)

2012

2012

Takım Geometrisinin Yüksek Yoğunluklu Polietilenin Sürtünme Karıştırma Nokta Kaynağına Tesiri

BİLİCİ M. K. , KURTULMUŞ M. , YÜKLER A. İ.

Süleyman Demirel Üniversitesi, Fen Bilimleri Enstitüsü Dergisi, vol.3, pp.265-270, 2012 (Other Refereed National Journals)

Refereed Congress / Symposium Publications in Proceedings

2021

2021

Evaluation of Factors Affecting Surface Roughness in Milling Process of St 37 Structural Steel by ANOVA Analysis

Bilici M. K.

INTERNATIONAL KOSOVO CONGRESS ON CULTURE, ARTS AND MULTI-DISCIPLINARY STUDIES, Priştine, Kosovo, 16 - 18 April 2021, pp.407-415 Creative Commons License

2021

2021

WELDING FAULTS AND CAUSES OF PLASTICS JOINING WITH FRICTION STIR WELDING

BİLİCİ M. K.

III. INTERNATIONAL ICONTECH SYMPOSIUM ON INNOVATIVE SURVEYS IN POSITIVE SCIENCES, Oujda, Morocco, 28 - 29 January 2021, pp.61-73

2021

2021

INVESTIGATION OF WELDING TOOL VARIABLES IN JOINING OF POLYETHYLENE SHEETS BY FRICTION STIR WELDING METHOD

BİLİCİ M. K.

III. INTERNATIONAL ICONTECH SYMPOSIUM ON INNOVATIVE SURVEYS IN POSITIVE SCIENCES, Oujda, Morocco, 28 - 29 January 2021, pp.52-60

2016

2016

POLİMERİK MALZEMELERİN SERTLİK DEĞERİNE NANO KATKILARINETKİSİ

KAŞTAN A., BİLİCİ M. K.

1 INTERNATIONAL ACADEMICRESEARCH CONGRESS, Antalya, Turkey, 3 - 05 November 2016

2016

2016

SÜRTÜNME KARIŞTIRMA NOKTA KAYNAK YÖNTEMİ İLE BİRLEŞTİRİLEN AA2024 T3 ve AA5754 H22 ALAŞIMLARININ MEKANİK ÖZELLİKLERİ

Bozkurt Y. , Bilici M. K.

16th International Materials Symposium IMSP'2016, Denizli, Turkey, 12 - 14 October 2016, vol.1, pp.1508-1518

2016

2016

Relation between friction stir stop welding parameters and mechanical properties of high density polyethylene glass spheres polymer composites

TAŞDEMİR M. , BİLİCİ M. K.

International conference on composite materials and matrials engineering (ICCMME 2016), bankok, Thailand, 9 - 11 March 2016, vol.860, pp.49-52

2016

2016

St44 ÇELİĞİNİN KAYNAĞI

KURTULMUŞ M. , YÜKLER A. İ. , BİLİCİ M. K.

1st International Conference on Engineering Technologyand Applied Sciences, 21 - 22 April 2016

2016

2016

Polipropilen Levhaların Sürtünme Karıştırma Nokta Kaynağında Kaynak Parametrelerinin Etkileri

BİLİCİ M. K. , YÜKLER A. İ. , KURTULMUŞ M. , KARTAL İ.

1. International conference on engineering technology and applied sciences, 21 - 22 April 2016

2016

2016

Kaynak Parametrelerinin C27000 Pirinç Alaşımı Sürtünme Karıştırma Kaynağı Üzerindeki Tesirleri

BİLİCİ M. K. , YÜKLER A. İ. , KURTULMUŞ M.

THE INTERNATIONAL CONFERENCE ON ENGINEERING TECHNOLOGY AND APPLIED SCIENCES, 21 - 22 April 2016

2014

2014

Taguchi Optimization of Process Parameters in Friction Stir Spot Welding of AA5754 and AA2024 Alloys

BİLİCİ M. K. , BOZKURT Y.

The 5th International Conference on Mechanical and Aerospace Engineering (ICMAE 2014), Roma, 18 - 19 July 2014, pp.161-166 identifier

2012

2012

Termoplastiklerin Sürtünme Karıştırma Nokta Kaynak Birleştirilmesinde Kaynak Parametrelerinin Etkileri

BİLİCİ M. K. , YÜKLER A. İ.

3. Ulusal Tasarım İmalat ve Analiz Kongresi ve CAD/CAM Günleri”TİMAK”, Turkey, 29 - 30 November 2012

2012

2012

Alüminyum Alaşımlarının Sürtünme Karıştırma Kaynak Hataları

BİLİCİ M. K. , YÜKLER A. İ. , fidaner o.

3. Ulusal Tasarım İmalat ve Analiz Kongresi ve CAD/CAM Günleri ”TİMAK, Turkey, 29 - 30 November 2012

2011

2011

Polietilenin Sürtünme Karıştırma Kaynak Parametrelerinin Taguchi Metodu ile Optimizasyonu

BİLİCİ M. K. , YÜKLER A. İ.

VIII. Kaynak Teknolojisi Ulusal Kongre ve Sergisi, Ankara, Turkey, 18 - 19 November 2011

2005

2005

Bor Katkılı Demir Esaslı Toz Metal Parçaların Aşınma Davranışlarının İncelenmesi

BİLİCİ M. K. , GÜLSOY H. Ö.

I.International Vocational and Technical Education Technologies Congress, 5 - 09 September 2005

Supported Projects

2015 - 2020

2015 - 2020

Termoplastiklerin Sürtünme Karıştırma Kaynağı

Project Supported by Higher Education Institutions

(Project Abstract)
Bilici M. K. (Executive)

Scientific Refereeing

January 2020

January 2020

JOURNAL OF ENGINEERING RESEARCH

SCI Journal

November 2019

November 2019

International Journal Of Advanced Manufacturing Technology

SCI Journal

February 2019

February 2019

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

SCI Journal

January 2019

January 2019

Journal Of The Brazilian Society Of Mechanical Sciences And Engineering

SCI Journal

February 2018

February 2018

International Journal Of Advanced Manufacturing Technology

SCI Journal

November 2017

November 2017

JOURNAL OF MANUFACTURING PROCESSES

SCI Journal

September 2017

September 2017

JOURNAL OF MANUFACTURING PROCESSES

SCI Journal

January 2016

January 2016

MATERIALS & DESIGN

SCI Journal

Tasks In Event Organizations

Ocak 2021

Ocak 2021

3.nd The International Symposium on Innovative Research in ICONTECH Positive Sciences

Scientific Congress

Bilici M. K.
Fas, Morocco

Eylül 2020

Eylül 2020

2.nd The International Symposium on Innovative Research in ICONTECH Positive Sciences

Scientific Congress

Bilici M. K.
Budapest, Hungary

Mayıs 2020

Mayıs 2020

The International Symposium on Innovative Research in ICONTECH Positive Sciences

Scientific Congress

Bilici M. K.
Bursa, Turkey

Aralık 2019

Aralık 2019

4th International Conference on Computational Modeling, Simulation and Applied Mathematics (CMSAM2019)

Scientific Congress

Bilici M. K.
Guangzhou, China

Aralık 2017

Aralık 2017

I. INTERNATIONAL TURKISH WORLD ENGINEERING AND SCIENCE CONGRESS

Scientific Congress

Bilici M. K.
Antalya, Turkey

Awards

January 2014

January 2014

YAYIN TEŞVİK ÖDÜLÜ

Tubitak

September 2013

September 2013

MARMARA ÜNİVERİSTESİ 130. YIL ATIF ÖDÜLÜ

Marmara Üniveristesi



Citations

Total Citations (WOS): 407

h-index (WOS): 7

Jury Memberships

June-2019

June 2019

Post Graduate

Post Graduate - İstanbul Gedik Üniversitesi

May-2017

May 2017

Post Graduate

Post Graduate - İstanbul Gedik Üniversitesi

September-2016

September 2016

Post Graduate

Post Graduate - Marmara Üniversitesi

April-2016

April 2016

Post Graduate

Post Graduate - İstanbul Gelişim Üniversitesi