Yayınlar & Eserler

Yayın Ağı
SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Comparison of thermal properties of Luffa-PCB and FR2 PCBs in power electronics circuit applications

Gunduz N. G., KESEN U., GENÇ G.
Ain Shams Engineering Journal , cilt.16, sa.1, 2025 (SCI-Expanded) identifier
Plum Print visual indicator of research metrics
PlumX Metrics
  • Captures
    • Readers: 2
  • Mentions
    • News Mentions: 1
see details

A fabrication and characterization of luffa/PANI/PEO biocomposite nanofibers by means of electrospinning

EGE G. K., YÜCE H., AKAY Ö., ÖNER H., GENÇ G.
PIGMENT & RESIN TECHNOLOGY , cilt.52, sa.1, ss.151-159, 2023 (SCI-Expanded) identifier identifier
Plum Print visual indicator of research metrics
PlumX Metrics
  • Citations
    • Citation Indexes: 3
  • Captures
    • Readers: 10
see details

Improvement of the Mechanical Properties of Plant Fiber-reinforced Composites through Hybridization

GENÇ G., Ozdemir Y.
JOURNAL OF NATURAL FIBERS , cilt.19, sa.8, ss.2805-2812, 2022 (SCI-Expanded) identifier identifier
Plum Print visual indicator of research metrics
PlumX Metrics
  • Citations
    • Citation Indexes: 10
  • Captures
    • Readers: 22
see details

Printability of bio-composite sheets made from paper mill and cardboard mill waste sludge

Yüce H., Genç G., Sönmez S., Özden Ö., Akgül A., Çetiner B. N.
PIGMENT & RESIN TECHNOLOGY , cilt.51, sa.5, ss.541-549, 2022 (SCI-Expanded) identifier identifier
Plum Print visual indicator of research metrics
PlumX Metrics
  • Citations
    • Citation Indexes: 8
  • Captures
    • Readers: 9
see details

Investigation of the Acoustic and Mechanical Properties of Homogenous and Hybrid Jute and Luffa Bio Composites

Saygılı Y., Genç G., Şanlıtürk K. Y., Körük H.
JOURNAL OF NATURAL FIBERS , cilt.19, sa.4, ss.1217-1225, 2022 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier
Plum Print visual indicator of research metrics
PlumX Metrics
  • Citations
    • Citation Indexes: 17
  • Captures
    • Readers: 47
see details

Preparation of a sustainable bio-copolymer based on Luffa cylindrica cellulose and poly(ɛ-caprolactone) for bioplastic applications

AKAY Ö., Altınkök Ç., Acik G., YÜCE H., Ege G. K., GENÇ G.
International Journal of Biological Macromolecules , cilt.196, ss.98-106, 2022 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier identifier
Plum Print visual indicator of research metrics
PlumX Metrics
  • Citations
    • Citation Indexes: 25
  • Captures
    • Readers: 44
see details

Jute and Luffa Fiber-Reinforced Biocomposites: Effects of Sample Thickness and Fiber/Resin Ratio on Sound Absorption and Transmission Loss Performance

KÖRÜK H., Ozcan A. C., GENÇ G., Şanlıtürk K. Y.
JOURNAL OF NATURAL FIBERS , cilt.19, sa.13, ss.6239-6254, 2022 (SCI-Expanded) identifier identifier
Plum Print visual indicator of research metrics
PlumX Metrics
  • Citations
    • Citation Indexes: 17
  • Captures
    • Readers: 28
see details

Identification of uncertainty levels of acoustic properties of biocomposites under different mounting conditions in impedance tube tests

Koruk H., Saygılı Y., GENÇ G., Şanlıtürk K. Y.
NOISE CONTROL ENGINEERING JOURNAL , cilt.69, sa.5, ss.392-400, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma identifier

Luffa/Epoxy Composites: Electrical Properties for PCB Application

Genç G., Sarıkaş A., Kesen U., Aydın S.
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY , cilt.10, sa.6, ss.933-940, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier
Plum Print visual indicator of research metrics
PlumX Metrics
  • Citations
    • Citation Indexes: 17
  • Captures
    • Readers: 19
see details

Influence of pretension on mechanical properties of carbon fiber in the filament winding process

AKKUŞ N., GENÇ G.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.91, ss.3583-3589, 2017 (SCI-Expanded) identifier
Plum Print visual indicator of research metrics
PlumX Metrics
  • Citations
    • Citation Indexes: 28
  • Captures
    • Readers: 57
see details

Identification of the Dynamic Characteristics of Luffa Fiber Reinforced Bio-Composite Plates

GENÇ G., KÖRÜK H.
BIORESOURCES , cilt.12, sa.3, ss.5358-5368, 2017 (SCI-Expanded) identifier identifier
Plum Print visual indicator of research metrics
PlumX Metrics
  • Citations
    • Citation Indexes: 22
  • Captures
    • Readers: 36
  • Social Media
    • Shares, Likes & Comments: 2342
see details

Investigation of the acoustic properties of bio luffa fiber and composite materials

KÖRÜK H., GENÇ G.
MATERIALS LETTERS , cilt.157, ss.166-168, 2015 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier
Plum Print visual indicator of research metrics
PlumX Metrics
  • Citations
    • Citation Indexes: 83
  • Captures
    • Readers: 127
see details

Dynamic properties of luffa cylindrica fiber reinforced bio-composite beam

Genc G.
JOURNAL OF VIBROENGINEERING , cilt.17, sa.4, ss.1615-1622, 2015 (SCI-Expanded) identifier

Comparison of the mechanical properties of flax and glass fiber composite materials

Genc G., El Hafidi A., Gning P. B.
JOURNAL OF VIBROENGINEERING , cilt.14, sa.2, ss.572-581, 2012 (SCI-Expanded) identifier

Design, testing, and FEM simulation of interlaced fiber composite structures

Akkus N., Verchery G., Kawahara M., Genc G.
COMPOSITE STRUCTURES , cilt.88, sa.4, ss.629-635, 2009 (SCI-Expanded) identifier identifier
Plum Print visual indicator of research metrics
PlumX Metrics
  • Citations
    • Citation Indexes: 3
  • Captures
    • Readers: 12
see details
Diğer Dergilerde Yayınlanan Makaleler

BİTKİSEL LİF TAKVİYELİ BİYOKOMPOZİT MALZEMELERİN ISI İLETİM KATSAYISI TAYİNİ

Özdemir M. R., GENÇ G.
İstanbul Ticaret Üniversitesi Fen Bilimleri Dergisi , cilt.23, sa.45, ss.199-208, 2024 (Hakemli Dergi) Creative Commons License identifier

AN INDUSTRIAL APPLICATION: IMPROVING PERFORMANCE OF AN OLD FORGING PRESS

Alemdaroglu U., Guler Z., Dalkiran F., GENÇ G.
MM SCIENCE JOURNAL , cilt.2022, ss.5764-5767, 2022 (ESCI) Creative Commons License identifier identifier
Plum Print visual indicator of research metrics
PlumX Metrics
  • Captures
    • Readers: 4
see details

FR4 ve FR2 Baskı Devre Kartlarının Mikroşerit Anten Uygulamasında Tasarımı ve Simülasyonu

KONUK EGE G., KESEN U., YÜCE H., GENÇ G.
Journal of Materials and Mechatronics:A (Online) , cilt.2, sa.1, ss.51-59, 2021 (Hakemli Dergi) identifier

A Gas Sensor Design and Heat Transfer Simulation with ZnO and TiO2 Sensing Layers

KONUK EGE G., YÜCE H., GENÇ G.
Manas Journal of Engineering , cilt.9, sa.1, ss.37-44, 2021 (Hakemli Dergi) identifier
Plum Print visual indicator of research metrics
PlumX Metrics
  • Captures
    • Readers: 4
see details

Hidrojenle Çalışan Demiryolu Araçlarında Kullanılan Hidrojen Tüplerinin Yüksek Hızlı Darbeye Karşı Dirençlerinin Sonlu Elemanlar Yöntemi ile İncelenmesi

AKKUŞ N., ÜNAL A., GENÇ G.
Demiryolu Mühendisliği , cilt.1, sa.14, ss.180-188, 2021 (Hakemli Dergi) identifier
Plum Print visual indicator of research metrics
PlumX Metrics
  • Captures
    • Readers: 2
see details

Investigation of the Sound Absorption and Transmission Loss Performances of Green Homogenous and Hybrid Luffa and Jute Fiber Samples

Ozcan A. C., ŞANLITÜRK K. Y., GENÇ G., KÖRÜK H.
Applied Science and Engineering Progress , cilt.14, sa.4, ss.668-679, 2021 (Scopus) identifier

How Does the Surface Topography of a Green Composite Affect its Printability?

SÖNMEZ S., GENÇ G., YÜCE H.
Afyon Kocatepe Üniversitesi Uluslararası Mühendislik Teknolojileri ve Uygulamalı Bilimler Dergisi , cilt.2, ss.55-60, 2019 (Hakemli Dergi)

Comparison of Flexural Properties of Luffa and Jute Fibers

Özdemir Y., GENÇ G.
Afyon Kocatepe Üniversitesi Uluslararası Mühendislik Teknolojileri ve Uygulamalı Bilimler Dergisi , cilt.2, ss.61-65, 2019 (Hakemli Dergi)

Analysis and Design of Hemispherical Pressure Vessel

Ozkan H. H., Ozhan S., GENÇ G.
Afyon Kocatepe Üniversitesi Uluslararası Mühendislik Teknolojileri ve Uygulamalı Bilimler Dergisi , cilt.2, ss.35-45, 2019 (Hakemli Dergi)

Application oriented recycling and machinability of waste bio-composite materials

GENÇ G., AKKUŞ N.
Turkish Journal of Materials , cilt.3, ss.58-60, 2018 (Hakemli Dergi)

Control of The Pretension in Filament Winding Process

Akkuş N., Genç G., Girgin C.
Acta Mechanica Et Automatica , cilt.2, ss.75-81, 2008 (ESCI)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler

Modal behavior of post low velocity impact flax/epoxy composite structures

Srihi K., Zergoune Z., Masse N., GENÇ G., El Hafidi A.
57th International JVE Conference, İstanbul, Türkiye, 13 Haziran 2022, cilt.1, ss.1-6 identifier

An Industrial Application: Improving Performance of an Old Forging Press

Alemdaroğlu U., Güler Z., Dalkıran F., GENÇ G.
THE 25TH INTERNATIONAL CONFERENCE ON HYDRAULICS AND PNEUMATICS, Prag, Çek Cumhuriyeti, 08 Haziran 2022, cilt.1, ss.1-4

A Gas Sensor Design and Simulation with ZnO and TiO2 Sensing Layers

KONUK EGE G., YÜCE H., GENÇ G.
INTERNATIONAL CONFERNCE ON ENGINEERING TECHNOLOGIES, Konya, Türkiye, 19 - 21 Kasım 2020, cilt.1, ss.240-245

DESIGNING OF BIO-COMPOSITE SUPPORTED METAL SURFACE ISOLATED PRINTED CIRCUIT BOARD

Aydın S., Kesen U., Sarıkaş A., Genç G.
The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in Cappadocia (IMSMATEC 2019), Nevşehir, Türkiye, 21 - 23 Haziran 2019 Creative Commons License

Comparison of flexural properties of luffa and jute fibers

GENÇ G., Ozdemir Y.
4th International Conference on Engineering Technology and Applied Sciences (ICETAS), Kiev, Ukrayna, 24 - 28 Nisan 2019, cilt.1, ss.365-368

Analysis and Design of Hemispherical Pressure Vessel

Ozkan H. H., Ozhan S., GENÇ G.
4th International Conference on Engineering Technology and Applied Sciences (ICETAS), Kiev, Ukrayna, 24 - 28 Nisan 2019, cilt.1, ss.209-217

How effects the surface topography of green composite on printability?

SÖNMEZ S., GENÇ G., YÜCE H.
4th International Conference on Engineering Technology and Applied Sciences (ICETAS), Kiev, Ukrayna, 24 - 28 Nisan 2019, cilt.1, ss.326-332

Bio-composite materials

GENÇ G.
BIT’xxs 5th Annual World Congress of Smart Materials-2019, Roma, İtalya, 5 - 08 Mart 2019, cilt.1, ss.23 identifier identifier identifier

Atık Ceviz Kabuğu Takviyeli Biyo-Kompozit Malzemenin Yüzey Topografisinin Baskı Kalitesine Etkisi

SÖNMEZ S., GENÇ G., YÜCE H.
6. Uluslararası Matbaa Teknolojileri Sempozyumu, 1 - 03 Kasım 2018

Application Oriented Recycling and Machinability of Waste Bio-Composite Materials

GENÇ G., AKKUŞ N.
International Conference on Agriculture, Technology, Engineering and Sciences (ICATES 2018), Lviv, Ukrayna, 19 - 21 Eylül 2018, cilt.1, ss.322-326

Atık Ceviz Kabuğu Takviyeli Kompozit Malzemelerin Baskı Yapılabilirliklerinin İncelenmesi

GENÇ G., SÖNMEZ S.
II. Uluslararası Basım Teknolojileri Sempozyumu, 11 - 12 Ekim 2017

An Investigationon Vibrational Analysis of Cantilever Beams Based on Fiber Breaks in Undirectional Fiber Composites

TOPTAŞ E., ERSOY S., GENÇ G., BOZKURT Y., AKKUŞ N., ERTUĞRUL İ.
International Science and Technology Conference, Berlin, Almanya, 17 - 19 Temmuz 2017, ss.97-103

HOW THE RESIN IMPREGNATION AFFECTS THE STRENGTH LOSS OF CARBON FIBER IN FILAMENT WINDING PROCESS?

GENÇ G., AKKUŞ N., TOPTAŞ E.
25th Annual International Conference on Composites or Nano Engineering, Roma, İtalya, 16 - 22 Temmuz 2017, cilt.1, ss.11-12

Elyaf Sarma İşleminde Sarım Parametrelerinin Karbon Elayf Mukavemetine Etkisinin İstatiksel Modellenmesi

GENÇ G., AKKUŞ N., TOPTAŞ E.
16th International Materials Symposium IMSP’2016, Pamukkale, 12 - 14 Ekim 2016

Elyaf sarma işleminde sarim parametrelerinin karbon elyaf mukavemetine etkisinin istatistiksel modellenmesi

GENÇ G., AKKUŞ N., TOPTAŞ E.
16th International Materials Symposium IMSP'2016, Denizli, Türkiye, 12 - 14 Ekim 2016, cilt.1, ss.694-700

On the difficulties in manufacturing of luffa fibers reinforced bio composites and variations in their dynamic properties

GENÇ G., KÖRÜK H.
The 45th International Congress and Exposition on Noise Control Engineering, INTER-NOISE 2016, Hamburg, Almanya, 21 - 24 Ağustos 2016, cilt.1, ss.1566-1570

Investigation of the vibro acoustic behaviors of luffa bio composites and assessment of their use for practical applications

GENÇ G., KÖRÜK H.
The 23rd International Congress on Sound and Vibration (ICSV23), Athens, Yunanistan, 9 - 14 Temmuz 2016, cilt.1, ss.1-8 identifier identifier

Caliper simulation using computer for vocational and technical education

GENÇ G., Sezen S., AKKUŞ N., TOPTAŞ E.
ERPA International Congresses on Education (ERPA), Athens, Yunanistan, 4 - 07 Haziran 2015, cilt.26 identifier

Identification the Young s Modulus of Flax Epoxy Bio Composites Materials by Vibration Method

GENÇ G., AKKUŞ N., YALÇIN F.
7th International Advanced Technologies Symposium (IATS’13), İstanbul, Türkiye, 30 Ekim - 01 Kasım 2013, cilt.1, ss.781-785

The Simulation of the Cutting Tool Chip Interface With Numerical Modelling During Orthogonal Cutting

AKKUŞ N., GENÇ G., YALÇIN F.
The 15th International Conference on Machine Design and Production, Denizli, Türkiye, 19 - 22 Haziran 2012, cilt.1, ss.781-785

An Approach for Syllabus of Finite Element Analysis in the International Welding Engineer Education

AKKUŞ N., TOPTAŞ E., GENÇ G.
International Congress on Advances in Welding Science and Technology for Construction, Energy and Transportation Systems (AWST), Antalya, Türkiye, 24 - 27 Ekim 2011, cilt.1, ss.71-77

Experiments and Finite Element Analysis of Arc Welding Residual Stresses

AKKUŞ N., GENÇ G., ŞEN S.
International Congress on Advances in Welding Science and Technology for Construction, Energy and Transportation Systems (AWST), Antalya, Türkiye, 24 - 26 Ekim 2011, cilt.1, ss.118-125

FEM INVESTIGATION OF THE FIBER REINFORCED COMPOSITE PRESSURE VESSEL UNDER IMPACT LOADING

AKKUŞ N., GENÇ G., TOPTAŞ E.
European Symposium on Pressure Equipment (ESOPE), Paris, Fransa, 28 Eylül - 30 Ekim 2010

Hidrojen Enerjisiyle Çalışan Aracın Tasarımı ve İmalatı

EGE M., Turpçu M., Çeber A., AKKUŞ N., GENÇ G., TOPTAŞ E.
IV. Ulusal Hidrojen Enerjisi Kongresi ve Sergisi, Kocaeli, Türkiye, 15 - 16 Ekim 2009

Şekil Hafızalı Alaşımlı Telin Elektrik Akımı Altındaki Davranışının Deneysel İncelemesi

TOPTAŞ E., AKKUŞ N., GENÇ G.
12. Uluslararası Malzeme Sempozyumu, Denizli, Türkiye, 15 - 17 Ekim 2008, cilt.1, ss.1157-1164

Elyaf Sarma İşleminde Kullanılan Sürekli Karbon Elyaf İle Alüminyum Makara Arasındaki Dinamik Sürtünme Katsayısının Teorik Ve Deneysel Olarak Belirlenmesi

GENÇ G., AKKUŞ N., TOPTAŞ E.
12. Uluslararası Malzeme Sempozyum, Denizli, Türkiye, 15 - 17 Ekim 2008, cilt.1, ss.425-433

Ankastre Kompozit Kirişte Gerilme Şekil Değiştirme Kontrolü

AKKUŞ N., GENÇ G.
Uluslararası 1. Mesleki Eğitim Teknolojileri Konferansı, İstanbul, Türkiye, 5 - 07 Eylül 2005, cilt.2, ss.1209-1214
Kitaplar

Jute and luffa fibers: Physical, acoustical, and mechanical properties

KÖRÜK H., GENÇ G., YÜCE H.
Cellulose Fibre Reinforced Composites, R. Arun Ramnath; Mavinkere Rangappa Sanjay; Suchart Siengchin; Vincenzo Fiore, Editör, Elsevier Ltd., Woodhead Publishing, New York, ss.357-378, 2023

Effects of machining on the acoustic and mechanical properties of jute and luffa biocomposites

GENÇ G., KÖRÜK H.
Cellulose Fibre Reinforced Composites: Interface Engineering, Processing and Performance, R. Arun Ramnath; Mavinkere Rangappa Sanjay; Suchart Siengchin; Vincenzo Fiore, Editör, Elsevier Ltd., Woodhead Publishing, New York, ss.343-355, 2023

Identification of the elastic and damping properties of jute and luffa fiber-reinforced biocomposites

KÖRÜK H., SAYGILI Y., GENÇ G., ŞANLITÜRK K. Y.
Advances in Bio-Based Fibres: Moving Towards a Green Society, Sanjay, M. R.; Madhu, P.; Jyotishkumar, P.; Suchart, S.; Sergey, G., Editör, Woodhead Publishing, Cambridge, ss.447-469, 2022

Acoustic and mechanical properties of biofibers and their composites

KÖRÜK H., KOÇ B., GENÇ G.
Advances in Bio-Based Fiber Moving Towards a Green Society, Sanjay, M. R.; Madhu, P.; Jyotishkumar, P.; Suchart, S.; Sergey, G., Editör, Woodhead Publishing, Cambridge, ss.407-438, 2022

Acoustic and mechanical properties of luffa fiber-reinforced biocomposites

KÖRÜK H., GENÇ G.
Mechanical and Physical Testing of Biocomposites, Fibre-Reinforced Composites and Hybrid Composites, Jawaid, Mohammad Thariq, Mohamed Saba, Naheed, Editör, Woodhead Publishing, Amsterdam, ss.325-341, 2019
Metrikler

Yayın

58

Atıf (WoS)

107

H-İndeks (WoS)

6

Atıf (Scopus)

137

H-İndeks (Scopus)

6

Atıf (Scholar)

56

H-İndeks (Scholar)

4

Atıf (TrDizin)

7

H-İndeks (TrDizin)

1

Atıf (Diğer Toplam)

19

Proje

12

Fikri Mülkiyet

2

Tez Danışmanlığı

6

Açık Erişim

6
BM Sürdürülebilir Kalkınma Amaçları