Prof. Dr. GARİP GENÇ

Yayın Ağı

Makaleler 26

1. Comparison of thermal properties of Luffa-PCB and FR2 PCBs in power electronics circuit applications

Gunduz N. G., KESEN U., GENÇ G.

Ain Shams Engineering Journal , cilt.16, sa.1, 2025 (SCI-Expanded)

2. BİTKİSEL LİF TAKVİYELİ BİYOKOMPOZİT MALZEMELERİN ISI İLETİM KATSAYISI TAYİNİ

Özdemir M. R., GENÇ G.

İstanbul Ticaret Üniversitesi Fen Bilimleri Dergisi , cilt.23, sa.45, ss.199-208, 2024 (Hakemli Dergi)

3. A fabrication and characterization of luffa/PANI/PEO biocomposite nanofibers by means of electrospinning

EGE G. K., YÜCE H., AKAY Ö., ÖNER H., GENÇ G.

PIGMENT & RESIN TECHNOLOGY , cilt.52, sa.1, ss.151-159, 2023 (SCI-Expanded)

4. AN INDUSTRIAL APPLICATION: IMPROVING PERFORMANCE OF AN OLD FORGING PRESS

Alemdaroglu U., Guler Z., Dalkiran F., GENÇ G.

MM SCIENCE JOURNAL , cilt.2022, ss.5764-5767, 2022 (ESCI)

5. Improvement of the Mechanical Properties of Plant Fiber-reinforced Composites through Hybridization

GENÇ G., Ozdemir Y.

JOURNAL OF NATURAL FIBERS , cilt.19, sa.8, ss.2805-2812, 2022 (SCI-Expanded)

6. Printability of bio-composite sheets made from paper mill and cardboard mill waste sludge

Yüce H., Genç G., Sönmez S., Özden Ö., Akgül A., Çetiner B. N.

PIGMENT & RESIN TECHNOLOGY , cilt.51, sa.5, ss.541-549, 2022 (SCI-Expanded)

7. Investigation of the Acoustic and Mechanical Properties of Homogenous and Hybrid Jute and Luffa Bio Composites

Saygılı Y., Genç G., Şanlıtürk K. Y., Körük H.

JOURNAL OF NATURAL FIBERS , cilt.19, sa.4, ss.1217-1225, 2022 (SCI-Expanded) Sürdürülebilir Kalkınma

8. Preparation of a sustainable bio-copolymer based on Luffa cylindrica cellulose and poly(ɛ-caprolactone) for bioplastic applications

AKAY Ö., Altınkök Ç., Acik G., YÜCE H., Ege G. K., GENÇ G.

International Journal of Biological Macromolecules , cilt.196, ss.98-106, 2022 (SCI-Expanded) Sürdürülebilir Kalkınma

9. Jute and Luffa Fiber-Reinforced Biocomposites: Effects of Sample Thickness and Fiber/Resin Ratio on Sound Absorption and Transmission Loss Performance

KÖRÜK H., Ozcan A. C., GENÇ G., Şanlıtürk K. Y.

JOURNAL OF NATURAL FIBERS , cilt.19, sa.13, ss.6239-6254, 2022 (SCI-Expanded)

10. A Gas Sensor Design and Heat Transfer Simulation with ZnO and TiO2 Sensing Layers

KONUK EGE G., YÜCE H., GENÇ G.

Manas Journal of Engineering , cilt.9, sa.1, ss.37-44, 2021 (Hakemli Dergi)

11. FR4 ve FR2 Baskı Devre Kartlarının Mikroşerit Anten Uygulamasında Tasarımı ve Simülasyonu

KONUK EGE G., KESEN U., YÜCE H., GENÇ G.

Journal of Materials and Mechatronics:A (Online) , cilt.2, sa.1, ss.51-59, 2021 (Hakemli Dergi)

12. Investigation of the Sound Absorption and Transmission Loss Performances of Green Homogenous and Hybrid Luffa and Jute Fiber Samples

Ozcan A. C., ŞANLITÜRK K. Y., GENÇ G., KÖRÜK H.

Applied Science and Engineering Progress , cilt.14, sa.4, ss.668-679, 2021 (Scopus)

13. Hidrojenle Çalışan Demiryolu Araçlarında Kullanılan Hidrojen Tüplerinin Yüksek Hızlı Darbeye Karşı Dirençlerinin Sonlu Elemanlar Yöntemi ile İncelenmesi

AKKUŞ N., ÜNAL A., GENÇ G.

Demiryolu Mühendisliği , cilt.1, sa.14, ss.180-188, 2021 (Hakemli Dergi)

14. Identification of uncertainty levels of acoustic properties of biocomposites under different mounting conditions in impedance tube tests

Koruk H., Saygılı Y., GENÇ G., Şanlıtürk K. Y.

NOISE CONTROL ENGINEERING JOURNAL , cilt.69, sa.5, ss.392-400, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma

15. Luffa/Epoxy Composites: Electrical Properties for PCB Application

Genç G., Sarıkaş A., Kesen U., Aydın S.

IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY , cilt.10, sa.6, ss.933-940, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma

16. How Does the Surface Topography of a Green Composite Affect its Printability?

SÖNMEZ S., GENÇ G., YÜCE H.

Afyon Kocatepe Üniversitesi Uluslararası Mühendislik Teknolojileri ve Uygulamalı Bilimler Dergisi , cilt.2, ss.55-60, 2019 (Hakemli Dergi)

17. Comparison of Flexural Properties of Luffa and Jute Fibers

Özdemir Y., GENÇ G.

Afyon Kocatepe Üniversitesi Uluslararası Mühendislik Teknolojileri ve Uygulamalı Bilimler Dergisi , cilt.2, ss.61-65, 2019 (Hakemli Dergi)

18. Analysis and Design of Hemispherical Pressure Vessel

Ozkan H. H., Ozhan S., GENÇ G.

Afyon Kocatepe Üniversitesi Uluslararası Mühendislik Teknolojileri ve Uygulamalı Bilimler Dergisi , cilt.2, ss.35-45, 2019 (Hakemli Dergi)

19. Application oriented recycling and machinability of waste bio-composite materials

GENÇ G., AKKUŞ N.

Turkish Journal of Materials , cilt.3, ss.58-60, 2018 (Hakemli Dergi)

20. Influence of pretension on mechanical properties of carbon fiber in the filament winding process

AKKUŞ N., GENÇ G.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.91, ss.3583-3589, 2017 (SCI-Expanded)

21. Identification of the Dynamic Characteristics of Luffa Fiber Reinforced Bio-Composite Plates

GENÇ G., KÖRÜK H.

BIORESOURCES , cilt.12, sa.3, ss.5358-5368, 2017 (SCI-Expanded)

22. Investigation of the acoustic properties of bio luffa fiber and composite materials

KÖRÜK H., GENÇ G.

MATERIALS LETTERS , cilt.157, ss.166-168, 2015 (SCI-Expanded) Sürdürülebilir Kalkınma

23. Dynamic properties of luffa cylindrica fiber reinforced bio-composite beam

Genc G.

JOURNAL OF VIBROENGINEERING , cilt.17, sa.4, ss.1615-1622, 2015 (SCI-Expanded)

24. Comparison of the mechanical properties of flax and glass fiber composite materials

Genc G., El Hafidi A., Gning P. B.

JOURNAL OF VIBROENGINEERING , cilt.14, sa.2, ss.572-581, 2012 (SCI-Expanded)

25. Design, testing, and FEM simulation of interlaced fiber composite structures

Akkus N., Verchery G., Kawahara M., Genc G.

COMPOSITE STRUCTURES , cilt.88, sa.4, ss.629-635, 2009 (SCI-Expanded)

26. Control of The Pretension in Filament Winding Process

Akkuş N., Genç G., Girgin C.

Acta Mechanica Et Automatica , cilt.2, ss.75-81, 2008 (ESCI)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 28

1. Can the recycling problem of waste printed circuit boards be solved with plant-based fiber-reinforced composites?

GENÇ G., KESEN U.

25th International Conference on Composite Structures, Porto, Portekiz, 19 - 22 Temmuz 2022, ss.169, (Özet Bildiri)

2. Modal behavior of post low velocity impact flax/epoxy composite structures

Srihi K., Zergoune Z., Masse N., GENÇ G., El Hafidi A.

57th International JVE Conference, İstanbul, Türkiye, 13 Haziran 2022, cilt.1, ss.1-6, (Tam Metin Bildiri)

3. An Industrial Application: Improving Performance of an Old Forging Press

Alemdaroğlu U., Güler Z., Dalkıran F., GENÇ G.

THE 25TH INTERNATIONAL CONFERENCE ON HYDRAULICS AND PNEUMATICS, Prag, Çek Cumhuriyeti, 08 Haziran 2022, cilt.1, ss.1-4, (Tam Metin Bildiri)

4. A Gas Sensor Design and Simulation with ZnO and TiO2 Sensing Layers

KONUK EGE G., YÜCE H., GENÇ G.

INTERNATIONAL CONFERNCE ON ENGINEERING TECHNOLOGIES, Konya, Türkiye, 19 - 21 Kasım 2020, cilt.1, ss.240-245, (Tam Metin Bildiri)

5. DESIGNING OF BIO-COMPOSITE SUPPORTED METAL SURFACE ISOLATED PRINTED CIRCUIT BOARD

Aydın S., Kesen U., Sarıkaş A., Genç G.

The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in Cappadocia (IMSMATEC 2019), Nevşehir, Türkiye, 21 - 23 Haziran 2019, (Tam Metin Bildiri)

6. How effects the surface topography of green composite on printability?

SÖNMEZ S., GENÇ G., YÜCE H.

4th International Conference on Engineering Technology and Applied Sciences (ICETAS), Kiev, Ukrayna, 24 - 28 Nisan 2019, cilt.1, ss.326-332, (Tam Metin Bildiri)

7. Analysis and Design of Hemispherical Pressure Vessel

Ozkan H. H., Ozhan S., GENÇ G.

4th International Conference on Engineering Technology and Applied Sciences (ICETAS), Kiev, Ukrayna, 24 - 28 Nisan 2019, cilt.1, ss.209-217, (Tam Metin Bildiri)

8. Comparison of flexural properties of luffa and jute fibers

GENÇ G., Ozdemir Y.

4th International Conference on Engineering Technology and Applied Sciences (ICETAS), Kiev, Ukrayna, 24 - 28 Nisan 2019, cilt.1, ss.365-368, (Tam Metin Bildiri)

9. Bio-composite materials

GENÇ G.

BIT’xxs 5th Annual World Congress of Smart Materials-2019, Roma, İtalya, 5 - 08 Mart 2019, cilt.1, ss.23, (Özet Bildiri)

10. Atık Ceviz Kabuğu Takviyeli Biyo-Kompozit Malzemenin Yüzey Topografisinin Baskı Kalitesine Etkisi

SÖNMEZ S., GENÇ G., YÜCE H.

6. Uluslararası Matbaa Teknolojileri Sempozyumu, 1 - 03 Kasım 2018, (Tam Metin Bildiri)

11. Application Oriented Recycling and Machinability of Waste Bio-Composite Materials

GENÇ G., AKKUŞ N.

International Conference on Agriculture, Technology, Engineering and Sciences (ICATES 2018), Lviv, Ukrayna, 19 - 21 Eylül 2018, cilt.1, ss.322-326, (Tam Metin Bildiri)

12. Atık Ceviz Kabuğu Takviyeli Kompozit Malzemelerin Baskı Yapılabilirliklerinin İncelenmesi

GENÇ G., SÖNMEZ S.

II. Uluslararası Basım Teknolojileri Sempozyumu, 11 - 12 Ekim 2017, (Tam Metin Bildiri)

13. An Investigationon Vibrational Analysis of Cantilever Beams Based on Fiber Breaks in Undirectional Fiber Composites

TOPTAŞ E., ERSOY S., GENÇ G., BOZKURT Y., AKKUŞ N., ERTUĞRUL İ.

International Science and Technology Conference, Berlin, Almanya, 17 - 19 Temmuz 2017, ss.97-103, (Tam Metin Bildiri)

14. HOW THE RESIN IMPREGNATION AFFECTS THE STRENGTH LOSS OF CARBON FIBER IN FILAMENT WINDING PROCESS?

GENÇ G., AKKUŞ N., TOPTAŞ E.

25th Annual International Conference on Composites or Nano Engineering, Roma, İtalya, 16 - 22 Temmuz 2017, cilt.1, ss.11-12, (Tam Metin Bildiri)

15. Elyaf Sarma İşleminde Sarım Parametrelerinin Karbon Elayf Mukavemetine Etkisinin İstatiksel Modellenmesi

GENÇ G., AKKUŞ N., TOPTAŞ E.

16th International Materials Symposium IMSP’2016, Pamukkale, 12 - 14 Ekim 2016, (Tam Metin Bildiri)

16. Elyaf sarma işleminde sarim parametrelerinin karbon elyaf mukavemetine etkisinin istatistiksel modellenmesi

GENÇ G., AKKUŞ N., TOPTAŞ E.

16th International Materials Symposium IMSP'2016, Denizli, Türkiye, 12 - 14 Ekim 2016, cilt.1, ss.694-700, (Tam Metin Bildiri)

17. On the difficulties in manufacturing of luffa fibers reinforced bio composites and variations in their dynamic properties

GENÇ G., KÖRÜK H.

The 45th International Congress and Exposition on Noise Control Engineering, INTER-NOISE 2016, Hamburg, Almanya, 21 - 24 Ağustos 2016, cilt.1, ss.1566-1570, (Tam Metin Bildiri)

18. Investigation of the vibro acoustic behaviors of luffa bio composites and assessment of their use for practical applications

GENÇ G., KÖRÜK H.

The 23rd International Congress on Sound and Vibration (ICSV23), Athens, Yunanistan, 9 - 14 Temmuz 2016, cilt.1, ss.1-8, (Tam Metin Bildiri)

19. Caliper simulation using computer for vocational and technical education

GENÇ G., Sezen S., AKKUŞ N., TOPTAŞ E.

ERPA International Congresses on Education (ERPA), Athens, Yunanistan, 4 - 07 Haziran 2015, cilt.26, (Tam Metin Bildiri)

20. Identification the Young s Modulus of Flax Epoxy Bio Composites Materials by Vibration Method

GENÇ G., AKKUŞ N., YALÇIN F.

7th International Advanced Technologies Symposium (IATS’13), İstanbul, Türkiye, 30 Ekim - 01 Kasım 2013, cilt.1, ss.781-785, (Tam Metin Bildiri)

21. The Simulation of the Cutting Tool Chip Interface With Numerical Modelling During Orthogonal Cutting

AKKUŞ N., GENÇ G., YALÇIN F.

The 15th International Conference on Machine Design and Production, Denizli, Türkiye, 19 - 22 Haziran 2012, cilt.1, ss.781-785, (Tam Metin Bildiri)

22. An Approach for Syllabus of Finite Element Analysis in the International Welding Engineer Education

AKKUŞ N., TOPTAŞ E., GENÇ G.

International Congress on Advances in Welding Science and Technology for Construction, Energy and Transportation Systems (AWST), Antalya, Türkiye, 24 - 27 Ekim 2011, cilt.1, ss.71-77, (Tam Metin Bildiri)

23. Experiments and Finite Element Analysis of Arc Welding Residual Stresses

AKKUŞ N., GENÇ G., ŞEN S.

International Congress on Advances in Welding Science and Technology for Construction, Energy and Transportation Systems (AWST), Antalya, Türkiye, 24 - 26 Ekim 2011, cilt.1, ss.118-125, (Tam Metin Bildiri)