Öğr. Gör. EMRE TAŞCIOĞLU

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Machinability of extruded and multi-directionally hot forged eco-friendly brass alloys

Zoghipour N., Tascioglu E., KAYNAK Y.

CANADIAN METALLURGICAL QUARTERLY , cilt.63, sa.2, ss.414-425, 2024 (SCI-Expanded)

Effect of Drag Finish Post-processing on Surface Integrity and Wear Behavior of Ti-6Al-4V Fabricated by Laser Powder Bed Fusion Additive Manufacturing

Gunessu E., Yilmaz M. S., Tascioglu E., Sharif S., KAYNAK Y.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.31, sa.12, ss.9962-9971, 2022 (SCI-Expanded)

Effect of printing parameters and post-process on surface roughness and dimensional deviation of PLA parts fabricated by extrusion-based 3D printing

Tascioglu E., Kitay O., Keskin A. O., KAYNAK Y.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , cilt.44, sa.4, 2022 (SCI-Expanded)

The effect of cooling on machining and phase transformation responses of Ni-rich NiTiHf high-temperature shape memory alloy

Kaynak Y., Tascioglu E., Sharif S., Suhaimi M. A., Benefan O.

Journal of Manufacturing Processes , cilt.75, ss.1144-1152, 2022 (SCI-Expanded)

Machining-induced surface integrity of Inconel 718 alloy fabricated by powder bed fusion additive manufacturing under various laser processing parameters

Tascioglu E., KAYNAK Y., Sharif S., Pitir F., Suhaimi M. A.

MACHINING SCIENCE AND TECHNOLOGY , cilt.26, sa.1, ss.49-71, 2022 (SCI-Expanded)

Effect of aging and finish machining on the surface integrity of selective laser melted maraging steel

Tascioglu E., Khan H. M., KAYNAK Y., Coskun M., Tarakci G., KOÇ E.

RAPID PROTOTYPING JOURNAL , cilt.27, sa.10, ss.1900-1909, 2021 (SCI-Expanded)

Heat treatment temperature-induced microstructure, microhardness and wear resistance of Inconel 718 produced by selective laser melting additive manufacturing

Karabulut Y., Tascioglu E., KAYNAK Y.

OPTIK , cilt.227, 2021 (SCI-Expanded)

Post-processing effects on the surface characteristics of Inconel 718 alloy fabricated by selective laser melting additive manufacturing

TAŞCIOĞLU E., KAYNAK Y.

ADDITIVE MANUFACTURING , cilt.5, sa.2, ss.221-234, 2020 (SCI-Expanded)

Influence of heat treatment temperature on the microstructural, mechanical, and wear behavior of 316L stainless steel fabricated by laser powder bed additive manufacturing

Tascioglu E., Karabulut Y., KAYNAK Y.

International Journal of Advanced Manufacturing Technology , cilt.107, sa.5-6, ss.1947-1956, 2020 (SCI-Expanded)

The effect of cutting parameters and cutting tools on machining performance of carbon graphite material

Tankus K., Tascioglu E., Atay G., Brunken H., Kaynak Y.

MACHINING SCIENCE AND TECHNOLOGY , cilt.24, sa.1, ss.96-111, 2020 (SCI-Expanded)

High speed machining of near-beta titanium Ti-5553 alloy under various cooling and lubrication conditions

Taşcıoğlu E., Gharibi A., Kaynak Y.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.102, ss.4257-4271, 2019 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

A comparative study on the machining performance of eco-friendly low-lead and lead-free brass alloys in replacement for leaded ones

Zoghipour N., Taşcioğlu E., Keski̇N A. Ö., KAYNAK Y.

Sigma Journal of Engineering and Natural Sciences , cilt.43, sa.1, ss.241-249, 2025 (ESCI)

Influence of burnishing process on surface integrity of inconel 718 fabricated by laser powder bed fusion additive manufacturing

Kaya M., Yaman N., Taşcioğlu E., KAYNAK Y.

Sigma Journal of Engineering and Natural Sciences , cilt.42, sa.2, ss.335-343, 2024 (ESCI)

The Effect of Processing on The Surface and Subsurface Characteristic of Plastic Injection Mold Steel

Kamber Ö. Ş., Taşcıoğlu E.

International journal of advances in engineering and pure sciences (Online) , cilt.31, sa.1, ss.17-22, 2019 (Hakemli Dergi)

Finish machining-induced surface roughness, microhardness and XRD analysis of selective laser melted Inconel 718 alloy

Kaynak Y., Tascioglu E.

Procedia CIRP , cilt.71, ss.500-504, 2018 (Scopus)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler

Development of an artificial neural network model for criticizing the burr formation during flat bottom drilling of CuZn38As brass alloy considering cutting tool geometry

Zoghipour N., Celik F., Tascioglu E., KAYNAK Y.

19th CIRP Conference on Modeling of Machining Operations, CMMO 2023, Karlsruhe, Almanya, 31 Mayıs - 02 Haziran 2023, cilt.117, ss.396-401

Machining-induced Surface Integrity in Brass Alloys

Tascioglu E., Zoghipour N., Sharif S., KAYNAK Y.

6th CIRP Conference on Surface Integrity, CSI 2022, Lyon, Fransa, 8 - 10 Haziran 2022, cilt.108, ss.654-659

The influence of edge radius and lead content on machining performance of brass alloys

Zoghipour N., Tascioglu E., Celik F., KAYNAK Y.

15th CIRP Conference on Intelligent Computation in Manufacturing Engineering, ICME 2021, Naples, İtalya, 14 - 16 Temmuz 2021, cilt.112, ss.274-279

Machining-induced surface integrity of holes drilled in lead-free brass alloy

Zoghipour N., Tascioglu E., Atay G., Kaynak Y.

5th CIRP Conference on Surface Integrity, CSI 2020, 1 - 05 Haziran 2020, cilt.87, ss.148-152

Surface Integrity Characteristics of NiTiHf High Temperature Shape Memory Alloys

KAYNAK Y., TAŞCIOĞLU E., Benafan O.

1st International Conference on Advanced Surface Enhancement, INCASE 2019, Singapore, Singapur, 10 - 12 Eylül 2019, ss.254-262

The Effect of Finish-Milling Operation on Surface Quality and Wear Resistance of Inconel 625 Produced by Selective Laser Melting Additive Manufacturing

TAŞCIOĞLU E., KAYNAK Y., POYRAZ Ö., ORHANGÜL A., ÖREN S.

1st International Conference on Advanced Surface Enhancement, INCASE 2019, Singapore, Singapur, 10 - 12 Eylül 2019, ss.263-272

Metrikler

Yayın

Atıf (Scopus)

467

H-İndeks (Scopus)

Atıf (Scholar)

616

H-İndeks (Scholar)

Toplam Atıf Sayısı

1213