Milling of Al 6060 Alloy with DLC Coated Cutting Tools


Ay M., Etyemez A.

International Journal of Innovative Research and Reviews, cilt.3, sa.1, ss.25-29, 2019 (Hakemli Dergi)

Özet

udy
,
the effects of rotation, feed rate
,
and MQL cooling system flow on surface
roughness and cutting forces in milling Al 6060 alloy with DLC coated cutting tools are
investigated. Taguchi method was used in the test design. Thus, time and cost are saved in
the tests. The results obtained from the tests were optimized and improved. S
urface roughness
and performance were improved with the Taguchi method. In this study, optimal workability
of Al 6060 material with DLC coated end mill was tried to be determined with grey relational
analysis and surface roughness and cutting force optimiz
ation was made.
Ideal
values were
obtained when the revolution was 3500 rpm
;
the feed rate was 450 mm/min.
Moreover,
the
MQL rate was 30 l/h. this study
,
the effects of rotation, feed rate
,
and MQL cooling system flow on surface
roughness and cutting forces in milling Al 6060 alloy with DLC coated cutting tools are
investigated. Taguchi method was used in the test design. Thus, time and cost are saved in
the tests. The results obtained from the tests were optimized and improved. S
urface roughness
and performance were improved with the Taguchi method. In this study, optimal workability
of Al 6060 material with DLC coated end mill was tried to be determined with grey relational
analysis and surface roughness and cutting force optimiz
ation was made.
Ideal
values were
obtained when the revolution was 3500 rpm
;
the feed rate was 450 mm/min.
Moreover,
the
MQL rate was 30 l/h.