Akademik Veri Yönetim Sistemi
Materials Today Communications, cilt.38, 2024 (SCI-Expanded)
Polyaspartic ester polyurea coatings are known for their eco-friendly properties due to the absence of VOCs and free isocyanates. While these coatings offer many advantages to the industry, achieving durability often requires the use of trimers with high NCO content. In such cases, applicators face challenges due to their notably short pot life. Furthermore, the second component used is a petroleum-based polyisocyanate, which limits its classification as a sustainable material. In this study, bio-based polyisocyanates were employed in polyaspartic coatings for the first time, thereby positioning them as sustainable alternatives without compromising their conventional properties. Fourier Transform Infrared Spectroscopy (FT-IR) and Nuclear Magnetic Resonance Spectroscopy (13C and 1H) were utilized to characterize the structure of polyaspartic ester coatings derived from biobased polyisocyanates along with solvent-free and catalyst-free PAEs. It was determined that the coating formulation had a convenient working time at room temperature. Pendulum hardness and contact angle measurements indicated that hard coatings with hydrophobicity were obtained with the addition of SiO2 and TiO2 particles without reducing the working time. The results revealed a notable 37% increase in tensile strength with the addition of 3 wt% silica compared to the base coating, and a remarkable 43 wt% increase when the coating obtained an equal proportion of titanium and silica at the same concentration. Additionally, Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC) studies revealed that the composite coatings comprising titanium and silica particles exhibited higher glass transition temperatures and residual char yields compared to the base coating. The morphology and surface roughness of the coatings were characterized using Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM).