The effect of bronze particles on the physical and mechanical properties of acrylonitrile-butadiene-styrene copolymer

Taşdemir M., Gülsoy H. Ö.

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, cilt.46, sa.8, ss.789-793, 2007 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 46 Sayı: 8
  • Basım Tarihi: 2007
  • Doi Numarası: 10.1080/03602550701274185
  • Dergi Adı: POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED)
  • Sayfa Sayıları: ss.789-793
  • Anahtar Kelimeler: ABS, bronze powder, mechanical properties, metal-polymer composite, FILLED POLYPROPYLENE COMPOSITES, DENSITY POLYETHYLENE COMPOSITES, METAL POWDERS, CONDUCTIVITY, POLYMERS
  • Marmara Üniversitesi Adresli: Evet

Özet

In this study, 5, 10, and 15 vol.% of bronze ( Cu- 10 wt.% Sn) powder on the physical and mechanical properties of Acrylonitrile-Butadiene- Styrene ( ABS) were investigated experimentally. After preparing metal- polymer matrix composites ( PMC) with a twin screw extruder and injection molding, fracture surface, the modulus of elasticity, yield and tensile strength, percentage elongation, Izod impact strength, hardness ( Shore D), melt flow index ( MFI), heat deflection temperature ( HDT), Vicat softening point, and glass transition temperature ( T-g) of each sample were determined. As compared to the unfilled ABS. It was found that by increasing the vol.% of bronze in ABS, yield and tensile strength, % elongation, Izod impact strength, MFI values decreased, while the modulus of elasticity, Shore D hardness, Vicat softening point, and HDT values increased.