Publications

Published journal articles indexed by SCI, SSCI, and AHCI

Numerical Analysis of Altered Parallel Flow Heat Exchanger with Promoted Geometry at Multifarious Baffle Prolongs

Kartal M. A., Feyzioğlu A.

Energies, vol.1, no.1, pp.1-2, 2024 (SCI-Expanded)

Improvement of UAV: design and implementation on launchability

Gokbel E., Güllü A., Ersoy S.

AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY, vol.95, no.5, pp.734-740, 2023 (SCI-Expanded) Sustainable Development

A Study on the Control System of Electric Water Heaters for Decarbonization

Feyzioğlu A.

ENERGIES, vol.16, no.5, pp.1-12, 2023 (SCI-Expanded) Sustainable Development

Beef Quality Classification with Reduced E-Nose Data Features According to Beef Cut Types

Feyzioglu A., Taspinar Y. S.

SENSORS, vol.23, no.4, pp.20-36, 2023 (SCI-Expanded)

Effect of Bumper Thickness with Collision Simulation of Passenger Vehicles

Özcan F., Gullu A., Ersoy S.

INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, vol.24, no.1, pp.241-246, 2023 (SCI-Expanded)

Additive Manufactured Strain Sensor Using Stereolithography Method with Photopolymer Material

Ertugrul I., Ulkir O., Ersoy S., Ragulskis M.

POLYMERS, vol.15, no.4, pp.991-1004, 2023 (SCI-Expanded)

Investigation of time-based pressure control for microfluidics chip design

Ersoy S., Atakök G., Khorsandi D., Toptaş E.

JOURNAL OF ENGINEERING RESEARCH, vol.11, no.4, pp.1-16, 2022 (SCI-Expanded)

Micro and Nano Sensors from Additive Manufacturing

Zare E. N., Makvandi P., Ersoy S.

JOURNAL OF NANOMATERIALS, vol.2022, 2022 (SCI-Expanded)

Advances in tannic acid-incorporated biomaterials: Infection treatment, regenerative medicine, cancer therapy, and biosensing

Bigham A., Rahimkhoei V., Abasian P., Delfi M., Naderi J., Ghomi M., et al.

CHEMICAL ENGINEERING JOURNAL, vol.432, pp.134146, 2022 (SCI-Expanded) Sustainable Development

DISCOVERY OF AGRICULTURAL DISEASES BY DEEP LEARNING AND OBJECT DETECTION

Karakaya M., Çelebi M. F., Gok A. E., Ersoy S.

ENVIRONMENTAL ENGINEERING AND MANAGEMENT JOURNAL, vol.21, no.1, pp.163-173, 2022 (SCI-Expanded)

Manufacturing of Microfluidic Sensors Utilizing 3D Printing Technologies: A Production System

Khorsandi D., Nodehi M., Waqar T., Shabani M., Kamare B., Zare E. N., et al.

JOURNAL OF NANOMATERIALS, vol.2021, 2021 (SCI-Expanded)

Design and Analysis Comparison of Surface Acoustic Wave-Based Sensors for Fabrication Using Additive Manufacturing

Waqar T., Ersoy S.

JOURNAL OF NANOMATERIALS, vol.2021, 2021 (SCI-Expanded)

MODELLING AND THERMAL ANALYSIS OF MICRO BEAM USING COMSOL MULTIPHYSICS

Ulkir O., Ertugrul I., GİRİT O., ERSOY S.

THERMAL SCIENCE, vol.25, 2021 (SCI-Expanded)

Data Analysis for Predictive Maintenance of Servo Motors

Girit O., Atakök G., Ersoy S.

SHOCK AND VIBRATION, vol.2020, 2020 (SCI-Expanded)

Articles Published in Other Journals

Reading Gokturkish text with the Yolo object detection algorithm

Karakaya M., Ersoy S., Feyzioğlu A., Ersoy S.

vol.4, no.2, pp.9-16, 2024 (Peer-Reviewed Journal) Sustainable Development

Material selection in sensor design for additive manufacturing

AKTAŞ B., ŞAHİN T., GÜLLÜ A., TOPTAŞ E., FEYZİOĞLU A., ERSOY S.

JVE International Ltd., vol.4, 2023 (Peer-Reviewed Journal)

Design and analysis of a 4-axis cartesian robot for unloading plastic injection machines in industrial applications

DAĞDELEN Y., AKYÜZ F., FEYZİOĞLU A., TOPTAŞ E.

JVE International Ltd., 2023 (Peer-Reviewed Journal)

Air leakage test system for product without atmosphere air connection

Temiz I., Feyzioğlu A., Çelebi M. F., Ersoy S.

Journal of Mechatronics and Artificial Intelligence in Engineering, vol.4, no.2, pp.40-46, 2023 (Peer-Reviewed Journal)

Detection of Defects in Rolled Stainless Steel Plates by Machine Learning Models

FEYZİOĞLU A., TAŞPINAR Y. S.

INTERNATIONAL JOURNAL OF APPLIED MATHEMATICS ELECTRONICS AND COMPUTERS, vol.11, no.01, 2023 (Peer-Reviewed Journal)

The Effect of Temperature on The Sound Absorption Coefficient of Porous Materials

FEYZİOĞLU A., UYSAL M., YILMAZ M.

International Periodical of Recent Technologies in Applied Engineering, 2023 (Peer-Reviewed Journal)

Bioluminescence sensor: enzymes, reaction and utilization as an energy source

Yağdıran B., Ersoy S., Gültekin B. N., Yağdıran M.

Journal of Mechatronics and Artificial Intelligence in Engineering, vol.3, no.2, 2022 (Peer-Reviewed Journal)

A low-cost remote driver sleep monitoring system

Ekşi Z., Camgöz A. N., Özarslan M., Sözer E., Çelebi M. F., Feyzioğlu A.

Journal of Mechatronics and Artificial Intelligence in Engineering, vol.3, no.2, pp.1-6, 2022 (Peer-Reviewed Journal) Sustainable Development

Productivity forecast with digital greenhouse automation system for sustainable agriculture

Gök A. E., Çelebi M. F., Koca A. S., Doğan M., Ersoy S.

Journal of Mechatronics and Artificial Intelligence in Engineering, vol.3, no.1, pp.40-46, 2022 (Peer-Reviewed Journal)

Manufacturing of complex geometric structure metal matrix structures used for special purposes

Kaba M., Ersoy S., Ekinli B.

Journal of Mechatronics and Artificial Intelligence in Engineering, vol.2, no.2, pp.11-17, 2021 (Peer-Reviewed Journal)

Launchable rotary wing UAV designs and launch mechanism designs for rotary wing UAV

Gökbel E., ERSOY S.

Journal of Mechatronics and Artificial Intelligence in Engineering, vol.2, no.2, pp.1-12, 2021 (Peer-Reviewed Journal)

Analysis of the vehicle: applying finite element method of 3D data

ÖZCAN F., ERSOY S.

Mathematical Models in Engineering, vol.7, no.4, pp.1-7, 2021 (Peer-Reviewed Journal)

Analysis of electroencephalography (EEG) signals and adapting to systems theory principles

Camgöz A. N., Ekşi Z., Çelebi M. F., Ersoy S.

JOURNAL OF COMPLEXITY IN HEALTH SCIENCES, vol.4, no.2, pp.1-6, 2021 (Peer-Reviewed Journal)

Tasarım Süreçlerinde Otomasyon Sistemlerinin Optimizasyonu ve Etkilerinin İncelenmesi

Gül B., TOPTAŞ E.

Avrupa Bilim ve Teknoloji Dergisi, no.28, pp.1534-1539, 2021 (Peer-Reviewed Journal)

Measurement of temperature and displacement with NiTi actuators under certain electrical conditions

Toptaş E., Çelebi M. F., Ersoy S.

JOURNAL OF MEASUREMENTS IN ENGINEERING, vol.9, no.2, pp.87-94, 2021 (ESCI)

Automatic Decision Making System with Environmental and Traffic Data

Ersoy S., Waqar T., Toptaş E.

Mathematical Models in Engineering, vol.7, no.2, 2021 (Peer-Reviewed Journal)

Yüksek Gerilim Kabloları için Güvenilir Mekanik Konektör Tasarımı ve Direnç Kontrol Analizi

FEYZİOĞLU A.

Çukurova Üniversitesi Mühendislik Fakültesi Dergisi, 2021 (Peer-Reviewed Journal)

Microfluidics chip design analysis and control

ÜNALLI İ., ERSOY S., ERTUĞRUL İ.

Journal of Mechatronics and Artificial Intelligence in Engineering, vol.1, no.1, pp.2-7, 2020 (Peer-Reviewed Journal)

Development of vehicle tracking system with low-cost wireless method

Ülkir O., Akın M., Ersoy S.

Journal of Mechatronics and Artificial Intelligence in Engineering, vol.1, no.1, pp.8-13, 2020 (Peer-Reviewed Journal)

Innovative approach to the design of mechanical parts

TOPTAŞ E.

Journal of Mechatronics and Artificial Intelligence in Engineering, 2020 (Peer-Reviewed Journal)

Electronic and Mechanical Design of a Hexapod Land Searching Robot

Boz T., Aras İ., Kıkıcı S., Ersoy S.

International Advanced Researches and Engineering Journal, vol.4, no.1, pp.34-40, 2020 (Peer-Reviewed Journal)

Starch Synthesis from Air Pollution Formation with a Converter System

Çalı S., Ersoy S.

Ulusal Çevre Bilimleri Araştırma Dergisi, vol.3, no.1, pp.11-19, 2020 (Peer-Reviewed Journal)

Vertical axis hybrid wind turbine design

TOPTAŞ E., Bayrak M. A., BOZ T.

Journal of Mechatronics and Artificial Intelligence in Engineering, 2020 (Peer-Reviewed Journal)

Refereed Congress / Symposium Publications in Proceedings

Liquid Coffee Made with The Cold Brew Method

UÇAR İ., UZUN BİÇERYEN P., FEYZİOĞLU A.

GANUD-4 International Conference on Gastronomy, Nutrition and Dietetics, İstanbul, Turkey, 16 - 18 December 2022

Vibration And Temperature Analysis of a Servo Motorwith Programmable Logic Controller

Sarı M. B., ERSOY S.

23rd International Scientific Conference MECHANIKA 2018, Druskininkai, Lithuania, 18 - 19 May 2018, vol.1, pp.141-144

3000 L Natural Gas Tunnel Drying Machine Production

AYDIN A., FEYZİOĞLU A.

Abant 2nd International Conference on Current Scientific Researches, ABANT, Turkey, 28 - 30 December 2023

İnsan Odakli Aydinlatma Kontrollü Ağ Geçi̇di̇ Ci̇hazi Geli̇şti̇ri̇lmesi̇

ŞAHİNER R., FEYZİOĞLU A.

5. Ulusal Mühendislikte Bilimsel ve Mesleki ÇalIşmalar Kongresi, İstanbul, Turkey, 16 - 18 December 2022

Lighting Fixtures Design for Industrial Facilities With 80 ̊c Ambient Temperature

İŞBİLİR Ö., KOCAOĞLU M., FEYZİOĞLU A.

8th International New York Conference On Evolving Trends İn Interdisciplinary Research & Practices, New York, United States Of America, 01 May 2023

Vibration analysis of screw-fed systems used in additive manufacturing technology

Ersoy S., Kaba M., Ekinli B.

57th International JVE Conference, İstanbul, Turkey, 13 - 15 June 2022, vol.43, pp.109-112

Determination of Unmanned Aerial Vehicle Landing Gear Material Selection Using Multi-critia Decision Making Method

SAYICI Y., HALİLOĞLU H., FEYZİOĞLU A.

1st International Canadian Scientific Research Congress, Toronto, Canada, 1 - 03 May 2024

Decarbonization Journey and Digitalization Policy of Turkey at The 27th Conference of The Parties (COP27)

FEYZİOĞLU A., ÖNER A., ŞENTÜRK T., BAŞ K. C.

International Conference of Digital and Green Transition, İstanbul, Turkey, 16 - 17 December 2022

Comprative Evaluation of Lithium Battery Alternatives for Energy Storage Systems Using The Analytic Hierarchy Method

UYSAL M., FEYZİOĞLU A., ÖLMEZ U., HALİLOĞLU H.

7th International Antalya Scientific Research and Innovative Studies Congress, Antalya, Turkey, 11 - 13 May 2024

Sustainability Roadmap Methodology and Tool For Innovative Product/ Process Eco-design

FEYZİOĞLU A., HIDIMOĞLU M. B.

7th International Congress on Engineering Sciences and Multidisciplinary Approaches, İstanbul, Turkey, 25 - 26 May 2024

Human and Freight Elevator Design for 4-storey Buildings: Marmara University Faculty of Technology Case Study

ARSLAN A., FEYZİOĞLU A.

5th International Engineering Research Symposium, Düzce, Turkey, 7 - 09 March 2024

Investigation of Multi-Criteria Decision Making Methods in the Context of Lightweighting Methods in Defense Industry Aircraft Design

ATA U., FEYZİOĞLU A., HALİLOĞLU H.

Ege 11th International Conference on Applied Sciences, İzmir, Turkey, 1 - 03 June 2024

Phase Isolated Air-Spaced High Voltage Busbar Solution

ERİŞ D., VOŞKİ V., GÖGÜLTER H., YALÇIN A. C., BÜYÜKDÖGERLİOĞLU M. C., FEYZİOĞLU A.

Selcuk 9th International Conference On Applied Sciences, Konya, Turkey, 15 December 2023

Development of an Easy-to-Multiplex, Dust-Free Luminaire Design for Park, Garden, Street Lighting, and Various Applications

İŞBİLİR Ö., KOCAOĞLU M., FEYZİOĞLU A.

Selcuk 9th International Conference On Applied Sciences, Konya, Turkey, 15 - 16 December 2023

Value Analysis in Right Slide Holder Design

URALKAN A., KALAFAT F., FEYZİOĞLU A.

12th Cukurova International Scientific Research Conference, Adana, Turkey, 9 - 12 March 2024

Project Management Solutions and PLM

Akbulut S., Aksoy C., FEYZİOĞLU A.

4th International Congress on Engineering Sciences and Multidisciplinary Approaches, 3 - 04 November 2022

Dış Mekan Ses Bariyeri Tasarımı

UZUN M. T., FEYZİOĞLU A., ÇENGEL ORUÇ Ç., KOCA O.

4th International Engineering Research Symposium, Düzce, Turkey, 4 - 06 March 2022

Energy Efficiency and Exergy Analysis of Identified Low Carbon Electric Water Heaters

KARTAL M. A., FEYZİOĞLU A.

International Conference on Climate Change, Energy Transition and Sustainability, İstanbul, Turkey, 29 - 30 September 2023

Efficiency Calculations of Circular Knitting Machines

NARİN K., TULUK B., TARI Y., FEYZİOĞLU A.

8th International Symposium on Current Developments in Science, Technology and Social Sciences, Paris, France, 24 - 26 October 2023

Digital Payment System Development

FEYZİOĞLU A., GONCA C. K., ELKAYA A. M.

2nd International Blockchain and Cryptocurrency Conference, Ankara, Turkey, 29 - 31 July 2022

The Interaction of Turkey's Decarbonization Target with Innovation Types

FEYZİOĞLU A.

2nd International Health and Climate Change Congress (IHCC), İstanbul, Turkey, 28 - 30 November 2022

Gantry 3D Laser Cutting Design

FEYZİOĞLU A., ODABAŞ A., DİDİR B., SARAL M. A.

EJONS 14th International Conference on Mathematic, Engineering and Natural Sciences, Paris, France, 6 - 07 July 2022

Nestle Health Science enteral beslenme ürün reçetelerinin Türkiye’de üretilmesi

ÇORUH ÇELİK N., FEYZİOĞLU A.

4th International Eurasian Conference on Science, Engineering and Technology, Ankara, Turkey, 14 - 16 December 2022

Remote Control of Variable Angle Displays in Industrial Facilities with Mobile AR

VOŞKİ V., KARA M., FEYZİOĞLU A.

2nd International Congress on Multidisciplinary Natural Sciences and Engineering, Ankara, Turkey, 1 - 02 December 2022

Developing a Battery Management System Appropriate for the Electricity Network Scale

ARICI B., GEDİKSİZ Ç., FEYZİOĞLU A.

2nd International Congress on Multidisciplinary Natural Sciences and Engineering, Ankara, Turkey, 1 - 02 December 2022

Development of a Cybersecurity Management System That Supports Different Communication Protocols and Detects Anomalies

BARAN Ö., FEYZİOĞLU A.

Ases IV. International Scientific Research Conference, İstanbul, Turkey, 13 May 2023

Society 5.0 Perspective and Developing Sustainability Strategies and Determining Common Sustainable Development Goals and Targets For The SMES in Textile Industry

FEYZİOĞLU A., GÖK A. E., KURTULUŞ KARA T. Y.

International Conference of Society 5.0: Environmental, Social and Economic Aspects, İstanbul, Turkey, 14 April 2023

Computational model for the nonlinear dynamic response of MEMS-based micromirror

Ertuğrul İ., Ersoy S., Ragulskis M.

58th International JVE Conference, Ventspils, Latvia, 25 - 26 August 2022, vol.44, no.22851, pp.149-155

Reading and playing musical notes with image processing techniques with mobile application

Ersoy S., Özdöşemeci F.

58th International JVE Conference, Ventspils, Latvia, 25 - 26 August 2022, vol.44, no.22589, pp.111-116

Arazide Arama Ve Tespit Robotu Tasarımı

Aras İ., KILICI S., ERSOY S.

The International Aluminium-Themed Engineering and Natural Sciences Conference, Konya, Turkey, 4 - 06 October 2019, vol.1, pp.274-278

Direction-Action Research for Design, Analysis, and Fabrication of Temperature Sensor Using Microstreolitography Technique

Waqar T., ERSOY S.

The International Aluminium-Themed Engineering and Natural Sciences Conference, Konya, Turkey, 4 - 06 October 2019, vol.1, pp.268-273

Individual Custom Design and Production of Artificial Organs

TEMİZ İ., ERSOY S.

2nd International Congress onAdvances in Bioscience andBiotechnology, Podgorica, Serbia And Montenegro, 26 - 30 June 2018, vol.2, pp.1-2

Publications

Published journal articles indexed by SCI, SSCI, and AHCI

Articles Published in Other Journals

Refereed Congress / Symposium Publications in Proceedings

Books & Book Chapters