Sintering effect on mechanical properties of composites of natural hydroxyapatites and titanium


Salman S., Gunduz O., Yilmaz S., Ovecoglu M. L., Snyder R. L., Agathopoulos S., ...Daha Fazla

CERAMICS INTERNATIONAL, cilt.35, sa.7, ss.2965-2971, 2009 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 35 Sayı: 7
  • Basım Tarihi: 2009
  • Doi Numarası: 10.1016/j.ceramint.2009.04.004
  • Dergi Adı: CERAMICS INTERNATIONAL
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.2965-2971
  • Anahtar Kelimeler: Sintering, Microstructure, Mechanical properties, Hydroxyapatite, Titanium, REINFORCED HYDROXYAPATITE, TEMPERATURE, MICROSTRUCTURE
  • Marmara Üniversitesi Adresli: Evet

Özet

This study presents the fabrication and characterization of composite materials of hydroxyapatite and Ti. Hydroxyapatite (HA) powder was obtained from bovine bones (BHA) and human enamel (EHA) via calcination technique. Fine powders of HA were admixed with 5 and 10 wt.% fine powder of metallic Ti. Powder-compacts were sintered at different temperatures between 1000 and 1300 degrees C. Compression strength, Vickers microhardness and elastic modulus as well as density were measured. SEM and X-ray diffraction studies were also conducted. The experimental results showed that addition of Ti to EHA and BHA decreases the elastic modulus, comparing to samples of pure BHA. The best mechanical properties for BHA-Ti composites were obtained after sintering in the range of 1200-1300 degrees C and for EHA-Ti composites in the range of 1100-1300 degrees C. (C) 2009 Elsevier Ltd and Techna Group S.r.l. All rights reserved.