Effects of green technology plasma pre-treatment on the wettability and ink adhesion of paper


ÖZSOY S. A., AÇIKEL S. M., AYDEMİR C.

PIGMENT & RESIN TECHNOLOGY, cilt.52, sa.1, ss.116-122, 2023 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 52 Sayı: 1
  • Basım Tarihi: 2023
  • Doi Numarası: 10.1108/prt-08-2021-0086
  • Dergi Adı: PIGMENT & RESIN TECHNOLOGY
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Academic Search Premier, ABI/INFORM, Aerospace Database, Communication Abstracts, Metadex, Civil Engineering Abstracts
  • Sayfa Sayıları: ss.116-122
  • Anahtar Kelimeler: Printing and packaging paper, Plasma treatment, Paper surface modification, Paper surface energy, Wettability, Ink adhesion, ATMOSPHERIC-PRESSURE PLASMA, PRINT QUALITY, BEHAVIOR, POLYSTYRENE, WATER
  • Marmara Üniversitesi Adresli: Evet

Özet

Purpose The surface energy of the printing material can be increased to desired levels with different chemicals or methods. However, the important thing is that the surface properties of printing material are not affected negatively. In this way the aim of this paper provide that the surface properties of matte and glossy coated paper is improved by the argon containing atmospheric pressure plasma device because the plasma treatment method does not occur surface damaging on the papers. Design/methodology/approach In experimental studies, test samples cut from 160 mm x 30 mm in size from 115 g/m(2) gloss- and matt-coated papers were used. The plasma treatments of paper samples were carried out with an argon containing atmospheric pressure plasma device of laboratory scale that produces plasma of the corona discharge type at radio frequency. The optimized plasma parameters were at a frequency of 20 kHz and plasma power 200 W. A copper electrode of length 12 cm and diameter 2.5 mm was placed in the centre of the nozzle. Findings Research findings showed that the surface energies of the papers increased with the increase in plasma application time. While the contact angle of the untreated glossy paper is 82.2, 8 second plasma applied G3 sample showed 54 contact angle value. Similarly, the contact angle of the base paper of matt coated is 91.1, while M3 is reduced to 60.4 contact angles by the increasing plasma time. Originality/value Plasma treatment has shown that no chemical coating is needed to increase the wettability of the paper surface by reducing the contact angle between the paper and the water droplet. In addition, the surface energies of all papers treated by argon gas containing atmospheric pressure plasma, increased. Plasma treatment provides to improve both the wettability of the paper and the adhesion property required for the ink, with an environmentally friendly approach.