Effect of yttria-doping on mechanical properties of bovine hydroxyapatite (BHA)


Gunduz O., Daglilar S., Salman S., Ekren N., Agathopoulos S., Oktar F. N.

Journal of Composite Materials, cilt.42, ss.1281-1287, 2008 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 42
  • Basım Tarihi: 2008
  • Doi Numarası: 10.1177/0021998308092196
  • Dergi Adı: Journal of Composite Materials
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.1281-1287
  • Anahtar Kelimeler: hydroxyapatite, yttria, sintering, microstructure, mechanical properties, ZIRCONIA, ENAMEL
  • Marmara Üniversitesi Adresli: Evet

Özet

Sintered bodies of hydroxyapatite, derived from calcinated bovine bone (BHA) and doped with 0.5 and 1wt% Y2O3, were prepared. Measurements of density, compression strength, and microhardness, along with scanning electron microscopy (SEM) and X-ray diffraction (XRD) were carried out. The experimental results showed that BHA doping with yttria favors formation of glassy phase, which advances sintering and results in a dense and reinforced BHA matrix. The best mechanical properties were achieved after sintering at 1200 degrees C for compressive strength (82 MPa) and 1300 degrees C for microhardness (672 HV). These results are better than pure BHA or composites of hydroxyapatite with Y2O3-stablized zirconia, qualifying yttria (as dopant of BHA) for further in vitro and in vivo experimentation.