Publications & Works

Articles Published in Journals That Entered SCI, SSCI and AHCI Indexes

Synthesis, characterization, thermal, and antibacterial activity studies on MgO powders

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, vol.99, no.3, pp.576-588, 2021 (Journal Indexed in SCI) identifier identifier

Investigation of Creep Behavior of CNT Reinforced Ti6Al4V Under Dynamic Loads

JOURNAL OF THE CHEMICAL SOCIETY OF PAKISTAN, vol.42, no.1, pp.70-80, 2020 (Journal Indexed in SCI) identifier

Investigation of wear behavior of Ti-6Al-4V/CNT composites reinforced with carbon nanotubes

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, vol.34, pp.1442-1449, 2019 (Journal Indexed in SCI) Creative Commons License identifier identifier

Platinum adsorption from chloride media using carbonized biomass and commercial sorbent

MINERALS & METALLURGICAL PROCESSING, vol.30, no.2, pp.129-136, 2013 (Journal Indexed in SCI) identifier identifier

IN THE JEWELRY, BRAZING AND LASER WELDING WITH PARAMETER OPTIMIZATION

ARCHIVES OF METALLURGY AND MATERIALS, vol.57, no.2, pp.525-537, 2012 (Journal Indexed in SCI) identifier

Effect of irradiation by 140 Mev Ag11+ ions on the optical and electrical properties of polypropylene/TiO2 composite

NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, vol.267, no.20, pp.3456-3460, 2009 (Journal Indexed in SCI) identifier identifier

Processing and mechanical properties of B4C reinforced Al matrix composites

JOURNAL OF ALLOYS AND COMPOUNDS, vol.482, pp.516-521, 2009 (Journal Indexed in SCI) identifier identifier

Preparation and Thermal Stress Analysis of Al2O3 Insulation Coatings on SS-304 Tape

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, vol.19, no.3, pp.2375-2378, 2009 (Journal Indexed in SCI) identifier identifier

Temperature Dependent Mechanical Characterisation of Styrene-Acrylonitrile

POLYMERS & POLYMER COMPOSITES, vol.17, no.4, pp.247-252, 2009 (Journal Indexed in SCI) identifier

Dielectric properties of polymer composites filled with different metals

JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY, vol.45, no.6, pp.462-469, 2008 (Journal Indexed in SCI) identifier identifier

An Analytical Model for Compressive Creep Behavior of HDPE Used in Plastic Pipe Manufacturing

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, vol.47, no.12, pp.1302-1307, 2008 (Journal Indexed in SCI) identifier identifier

Dislocation generation in GaAs crystals grown by the vertical gradient freeze method

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, vol.102, pp.179-187, 2000 (Journal Indexed in SCI) identifier identifier

Effect of growth direction on twin formation in GaAs crystals grown by the vertical gradient freeze method

CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES, vol.1, no.1, pp.85-89, 2000 (Journal Indexed in SCI) identifier

Dislocation dynamics simulations in the presence of interacting cracks

JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, vol.121, no.2, pp.151-155, 1999 (Journal Indexed in SCI) identifier identifier

Simulation of dislocation configurations in the presence of mobile point defects

SCRIPTA MATERIALIA, vol.36, no.1, pp.123-128, 1997 (Journal Indexed in SCI) identifier identifier

DISLOCATION GENERATION IN GAAS CRYSTALS GROWN BY THE BRIDGMAN METHOD USING A CRYSTALLOGRAPHIC MODEL

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, vol.2, no.1, pp.67-78, 1994 (Journal Indexed in SCI) Sustainable Development identifier identifier

SIMULATION OF DISLOCATION MICROSTRUCTURES IN 2 DIMENSIONS .2. DYNAMIC AND RELAXED STRUCTURES

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, vol.1, no.4, pp.383-402, 1993 (Journal Indexed in SCI) identifier identifier

SIMULATION OF DISLOCATION MICROSTRUCTURES IN 2 DIMENSIONS .1. RELAXED STRUCTURES

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, vol.1, no.1, pp.1-17, 1992 (Journal Indexed in SCI) identifier identifier

DISLOCATION DISTRIBUTIONS IN 2 DIMENSIONS

SCRIPTA METALLURGICA, vol.23, no.8, pp.1347-1352, 1989 (Journal Indexed in SCI) identifier identifier

Articles Published in Other Journals

Türkiye İnşaat Sektöründe 2016 ve 2017 Yıllarında Meydana Gelen İş Kazalarının İstatistiksel Olarak Karşılaştırılması

International Journal of Advances in Engineering and Pure Sciences, vol.2, pp.137-144, 2020 (Other Refereed National Journals)

Türkiye’de Metal Sektöründe Meydana Gelen İş Kazalarının Analizi

International Journal of Advances in Engineering and Pure Sciences, vol.1, pp.70-82, 2019 (Other Refereed National Journals)

Strategy Development Process in Higher Education The Case of Marmara University

Procedia-Social and Behaviroal Sciences, vol.235, pp.36-45, 2016 (International Conference Book) Creative Commons License

Refereed Congress / Symposium Publications in Proceedings

PRODUCTION AND CHARACTERIZATION OF BIOGLASS-YIG CERAMIC COMPOSITE

6.ULUSLARARASI MUHENDİSLİK MİMARLIK VE TASARIM KONGRESİ, İstanbul, Turkey, 17 - 18 December 2020

Composite Material Selection in Avionic Radome

5. International Conference on Material Science and Technology, Nevşehir, Turkey, 16 - 18 October 2020

PROCESSING AND MECHANICAL PROPERTIES OF CARBONNANOTUBE (CNT) REINFORCED ALUMINUM MATRIX COMPOSITES

1. international Turkısh World Engineering and Science Congress(ITWESC-2017), Antalya, Turkey, 7 - 10 December 2017

MECHANICAL PROPERTIES OF PLA AND ABS PARTSMANUFACTURED BY THE 3D PRINTER FUSED FILAMENTFABRICATION PROCESS

1. international Turkısh World Engineering and Science Congress(ITWESC-2017), Antalya, Turkey, 7 - 10 December 2017

Surface Design of Turkish Infantry Rifle by PTFE and Electroless Nickel Coating Systems

”, 2nd International Mediterranean Science and Engineering Congress, IMSEC 2017, Adana, Turkey, 25 - 27 October 2017

The Similar and Dissimilar MIG Welding of 304 and 321 Austenitic Stainless Steels

”,2nd International Mediterranean Science and Engineering Congress, IMSEC 2017, Adana, Turkey, 25 - 27 October 2017

Investigation of Wear behavior of Ti6Al4V based composite reinforced with Carbon Nanotubes(CNT)

IDEFIS2017, uluslar arası II. savunma Sanayii Sempozyumu, Kırıkkale, Turkey, 6 - 08 April 2017

Investigation of Ti6Al4V Powder Mechanical properties reinforced with Boron Nitride Powder

IDEFIS2017, Uluslar arası II. Savunma sanayii sempozyumu, Kırıkkale, Turkey, 6 - 08 April 2017

Desıgn of Glass Shapıng Molds

International Conference on Advances and Innovations in Engineering (ICAIE) Fırat University Elazığ, Elazığ, Turkey, 10 - 12 May 2017, pp.1085

Surface Desıgn of Alumınıum and Zınc Extrusıon Dıes

ICAIE (International Conference on Advances and Innovations in Engineering) Fırat University Elazığ, Elazığ, Turkey, 10 - 12 May 2017, pp.1091

Surface Desıgn of Gun Barrel of Infantry Troops’s Rifle

ICAIE (International Conference on Advances and Innovations in Engineering) Fırat University Elazığ, Elazığ, Turkey, 10 - 12 May 2017, pp.1084

“İnvestigated Characterization and Mechanical Behavior Of Carbon Nanotubes Reinforced Aluminum Matrix Composite Materials”

“ISTANBUL INTERNATIONAL CONFERENCE ON PROGRES IN APPLIED SCIENCE 2017, İstanbul, Turkey, 4 - 06 January 2017

DEVELOPİNG OF MECHANICAL BEHAVIOR OF PARTICULATE REINFORCED TITANIUM MATRIX COMPOSITE

“ISTANBUL INTERNATIONAL CONFERENCE ON PROGRES IN APPLIED SCIENCE 2017, İstanbul, Turkey, 4 - 06 January 2017

“Investigation of Ti6Al4V Powder Wetting behavior reinforced with Carbon Nanotubes

“ISTANBUL INTERNATIONAL CONFERENCE ON PROGRES IN APPLIED SCIENCE 2017”, İstanbul, Turkey, 4 - 06 January 2017

“DETERMİNATİON OF Ti6Al4V POWDER MATRİX TO BE REİNFORCED CARBON NANO TUBE (CNT) CHARECTERİSATİON OF POWDERS

“ISTANBUL INTERNATIONAL CONFERENCE ON PROGRES IN APPLIED SCIENCE 2017, İstanbul, Turkey, 4 - 06 January 2017

Strategy Development Process in Higher Education: The Case of Marmara University

12th International Strategic Management Conference (ISMC), Antalya, Turkey, 28 - 30 October 2016, vol.235, pp.36-45 Creative Commons License Sustainable Development identifier

The similar and dissimilar MIG welding of 304 and 316 austenitic stainless steels

1st International Mediterranean Science and Engineering Congress, Adana, Turkey, 26 - 28 October 2016

Comparison of Measured and Empirically Predicted Creep Behavior Of High Density Polyethylene HDPE

7. Uluslararası Kırılma Konferansı, Kocaeli, Turkey, 19 October 2005 - 21 January 2016

Investigation of Hardening of AISI 4140 Steel Using Nd YAG LASER

15th International Materials Symposium Pamukkale (IMSP) 2014, Denizli, Turkey, 15 - 17 October 2014

Dielectric Behavior of Metal Polymer Composite for EMI Shielding

DAE Symposium on Solid State Physics, Manasagangotri, Mysore, India, 27 - 31 December 2008

Dislocation Dynamic Simulation in the Presence of Interacting Cracks

Society of Engineering Science, 35th Annual Technical Meeting, Pullman, Washington, Washington, Kiribati, 27 - 30 September 2008

Optical and structural properties of polypropylene TiO2 composites irradiated with 140 MeV Ag11 ions

24th International Conference on Nuclear Tracks in Solids, Bologna, Italy, 1 - 05 September 2008

Dielectric properties of polymethyl methaacrylate carbon black composites irradiated with 140 MeV Ag11 ions

16th International conference on Ion beam modification of materials, Dresden, Germany.IBMM., Dresden, Germany, 31 August - 05 September 2008

AC electrical properties of poly methyl methacralate carbon black composites irradiated with 140 MeV Ag11 ions

15th International Conference on Surface Modification of Materials by Ion Beams (SMMIB-15), Mumbai, India, 30 September - 05 October 2007

Modelling of Twin formation in GaAs xrystals during the growth processes

10. Ulusal Mekanik Kongresi, Istanbul, İstanbul, Turkey, 15 - 19 September 1997

Different Techniques Of Evaluation Of Test Results

The First Scientific-Technical Seminar on Problems on Aviation Engine Construction, USATU/Ufa, Bashkortostan, Russia, Bashkortostan, Russia, 6 - 10 June 1996

Combustor Design in Gas Turbine Engines

The First Scientific-Technical Seminar on Problems on Aviation Engine Construction, USATU/Ufa, Bashkortostan, Russia, Bashkortostan, Russia, 6 - 10 June 1996

Importance of Flamability in Material Selection

The First International Conference on Fire and Safety, and Exhibition, Istanbul, İstanbul, Turkey, 20 - 21 May 1996

Gençleştirme Tekniklerinin Nikel Esaslı Süperalaşımların Sürünme Ömürlerine Etkisi

4. Yanma Sempozyumu, Kirazlıyayla-Uludag, Bursa, Turkey, 19 - 21 July 1995

Simulation of Dislocation Configurations in the Presence of Mobile Defects

Computer Simulation in Materials Science, Nano/Meso/Macroscopic Space and Time Scales, NATO ASI, Ile d’Oleron, FRANCE, Ile d'Oleron, France, 6 - 08 June 1995

Simulation of Anchoring of Dislocations by Vacancies

First International Aerospace and Advanced Technologies Symposium, İstanbul, Turkey, 8 - 10 April 1995

Flame Spray ile Yapılan Seramik Kaplamaların Termo Mekanik Özellikleri

I. Havacılık Sempozyumu, H.H.O. Yeşilyurt, Istanbul, İstanbul, Turkey, 9 - 10 June 1994

Zirkonya Esaslı Termal Barier Kaplamaların Mekanik Özellikleri

I. Havacılık Sempozyumu, H.H.O. Yeşilyurt, Istanbul, İstanbul, Turkey, 9 - 10 June 1994

Helikopter Yapılarında Dinamik Yüklemeler ve Yorulma Çatlak Analizi

I. Havacılık Sempozyumu, H.H.O. Yeşilyurt, Istanbul, İstanbul, Turkey, 9 - 10 June 1994

Parcacıkların Dislokasyon Paternleri Üzerindeki Etkilerinin Simülasyonu

VIII. Ulusal Mekanik Kongresi Antalya, Antalya, Turkey, 6 - 10 September 1993

Yanma Odalarının Seramik Kaplama ile Korunması

3. Yanma Sempozyumu, Kirazlıyayla-Uludag, Türkiye, 19-21 Temmuz, 1993., Bursa, Turkey, 9 - 21 July 1993

Modeling of Dislocation Microstructures

International Conference on Plasticity, Baltimore, U.S.A, Baltimore, United States Of America, 19 - 21 July 1993

Modelling of Dislocation Microstructures

MECAMAT 93, Fontainebleau, France, Fontainebleau, France, 6 - 08 July 1993

Simulation of Effect of Fibers on Dynamic Dislocation Structures

Computational Mechanics Conference, İstanbul, Turkey, 8 - 11 June 1993

Simulation of Dislocation Arrangements in Multiaxial Deformation of Crystal

ASME, Applied mechanics, Materials and Aerospace, Annual Meeting, Scottsdale, Arizona, Arizona, United States Of America, 28 - 01 April 1992

SIMULATION OF STEADY-STATE DISLOCATION CONFIGURATIONS

SYMP ON MATERIALS MODELLING : FROM THEORY TO TECHNOLOGY, IN HONOUR OF THE 60TH BIRTHDAY OF RON BULLOUGH, Oxford, United Kingdom, 26 - 27 September 1991, pp.85-90 identifier

Dislocation Dynamics Simulations in 2 Dimension

TMS Annual Meeting, New Orleans, Louisiana, New Orleans, Louisiana, United States Of America, 24 - 28 February 1991

Single and Multiple Dislocation Dynamics Molecular Dynamics Approaches

TMS Fall Meeting, Detroit, MI October 1990., Detroit, United States Of America, 9 - 11 October 1990

Dynamics Simulations of Dislocation Microstructure

TMS Fall Meeting, Indianapolis, Indiana October 1989, Indianapolis, Indiana, United States Of America, 1 - 05 October 1989

Dynamical Simulation of the Motion of a Large Number of Dislocations in 2 D

TMS Fall Meeting, Chicago, Illinois September 1988., Illinois, United States Of America, 26 - 29 September 1988